Find a local timber flooring profesional in Inner South Melbourne

sand and polish kitchen/dining and entrace.

Looking for a carpenter or decking installer to build a timber deck in our courtyard. We’d like to update the existing brick patio and garden bed area with a timber deck, similar to the attached example photo. The deck would extend across the existing area, with a couple of wide steps down to the brick pathway. Looking for a simple, neat finish. Open to suggestions on the best and most cost-effective way to complete the job. Located in Cheltenham. Happy to arrange a time to inspect and quote.

Offer requested to remove lino + professional sand & polish timber kitchen floor & small adjacent laundry – approx. 13 m² – 15 m² in total. The work required is expected to include: • Removal and disposal of the existing lino/vinyl flooring. • Removal of any old adhesive/residue and suitable preparation of the timber underneath. • Professional sanding of the exposed timber floor, including edges/corners and around the fixed kitchen cabinetry. • Professional sanding of the exposed timber in the laundry, including small edges/corners and around the central heater, laundry sink/cabinet. • Minor filling/preparation where reasonably required. • Application of an appropriate hard-wearing clear timber floor coating/finish, suitable for a kitchen and laundry areas. • Sufficient coats and finishing to provide a durable, professional result. Quality water or solvent based varnish. • Blend-in as best as possible with polished adjacent rooms. • A GST Invoice for work done will need to be provided if you're a registered business with A.B.N. Do not bother otherwise.

Looking for an experienced parquet timber flooring specialist to inspect and repair an existing timber floor in a Melbourne property. There is a dark, worn section of parquet flooring that sinks slightly when stepped on and springs back up. Work required: - Inspect the affected parquet flooring. - Identify the cause of the movement. - Check for moisture damage, loose timber blocks and potential subfloor deterioration. - Repair or replace damaged sections as necessary. - Secure any loose parquet blocks. - Match the existing timber flooring as closely as possible. - Provide a quote for sanding and refinishing the affected section if appropriate. Prefer to repair the existing floor rather than replace the entire flooring. Please confirm your experience with parquet repairs and whether you can inspect the subfloor. Photos available. Located in Melbourne, VIC. Please quote for inspection and repair, including materials and labour.

Please see previous detail. Requesting quote

timber deck area needs reconditioned including oiled. Total area is approximately 40 square metre.

I have an existing timber deck with approximately 4–6 localised areas where decking boards are damaged/split around the fixings, including one section where part of a board has broken away (photos attached). I’m looking for someone experienced with timber decking to inspect the affected boards and repair or replace the damaged sections/boards as required, and check that the supporting timber underneath is sound. The remainder of the deck appears structurally okay. Located in Murrumbeena.

We have recently ripped up the carpet of a bedroom in house and want to sand and polish the underlying timber. We have done the same with other rooms in the house 4-5 years ago and are after a similar finish to that (see 3rd photo). Bedroom is 3x4m including the timber flooring in wardrobe.

I’m looking for an experienced decking carpenter/builder to supply and install a 5m x 3m deck in my backyard, as shown in the attached photos. Scope of work * Build a 5m x 3m deck in the existing paved area. * Deck is to be level with the house floor/door threshold, creating a flush transition from inside to the new deck. * The deck will be constructed over the existing brick paving. * Include all required foundations, framing, bearers/joists, supports and fixings necessary for a structurally sound installation. * Trees and existing vegetation will be removed before the deck installation, so this does not need to be included in the quote. * Supply and install all materials, including timber/decking, substructure, fixings and any required supports. * Finish the deck neatly around the existing house, doors and garden boundaries. * Please allow for appropriate drainage/ventilation beneath the deck where required. Decking material Please recommend the most suitable low-maintenance decking timber/material for this location. I’m particularly interested in a good-quality option that: * Requires minimal ongoing maintenance * Handles Melbourne weather well * Has good durability/longevity * Looks appropriate with the existing red brick house Please provide pricing for your recommended option, and if relevant, an alternative such as treated pine, hardwood or composite decking. Quote Please provide an all-inclusive quote, including: * All decking materials * Structural framing/foundation * Labour * Fixings * Delivery * Installation * Finishing/sealing/oiling if required * Removal of any installation waste Area: approximately 5m x 3m (15m²) I’m looking for someone experienced in residential decking who can inspect the site and confirm the appropriate foundation/substructure given the existing brick paving and required finished height.

Clean deck 5.6 metres x 4 metres, with two steps, composite decking plus two steps

The property had a old vilulcan heater and is being removed. The floor needs to be repaired. Find the photos for further details.

Looking for someone experienced in timber/parquet floor sanding to sand two small areas of existing parquet flooring back to bare timber: Kitchen: 2.6 × 2.2m (approx. 5.7m²) Hallway/entrance: 1.35 × 2.5m (approx. 3.4m²) Total: approx. 9.1m² The floors currently have an older amber/yellow finish that I’d like completely sanded back. I’ve attached photos showing the current flooring as well as another section of the same parquet that has already been professionally sanded, to show the result I’m aiming for. Sanding only — no staining, sealing or coating required. I’ll apply the finish myself. Quote must include all labour, sanding equipment, abrasives and any other materials required. Please vacuum/remove all sanding dust afterwards and leave the floors clean, evenly sanded and ready for coating. Please only offer if you have experience sanding parquet/timber floors and can provide your own professional sanding equipment.

Sand and polish one room, just under 11m2. Small area of newly laid boards.

There is a small section of timber floor near the entrance that has slightly sunk/sagged. There is approximately 1.2m of crawl space underneath the floor. I need someone to access underneath and add suitable support/packing to raise and stabilise this section. Prefer to repair it from underneath without removing or damaging the existing timber floorboards.

I need to have carpets removed and engineered timber floor planks installed. Underlay and timber flooring is provided. Click on system, no glue is required. Bedroom 1 and bedroom 2 areas only (Orange on the plan).

Need someone to TOUCH UP/MAKE GOOD the timber floors around the edges of the new kitchen.

We have existing engineered timber floorboards that are generally in good condition. We are looking for a professional machine/deep clean followed by a maintenance/protective coat or screen-and-recoat if appropriate. We do not want the floors fully sanded just clean and coating with a product like Bona Traffic HD Extra Matte. Area approx 11 x 6m.

Oil from diffuser fell on the timber floor and has left a stain. Need it to be lifted as part of end of lease.

There is a small wonky bit on edge of our timber decking - circled in the photo below. When you step on it, it is bouncy. Looking for a handyman to help me fix this!

- Chevron timber flooring - Good condition, just dull in areas - No sanding required, clean + polish only - Empty house, easy access - Need done before move-in Looking for someone experienced with timber floors.