Find a professional tiler near you

We’ve removed a timber bi fold door , we want to tile the existing gab from the bottom track. I have tiles enough to use to create the step down. Also need a angle strip across the edge

Ensuite floor is bare cement and needs tiles laid, have the new tiles

Ensuite is empty and needs new tiles installed

It's cafe required tiling work. Sand cement and tiling and grouting work. 57 sqm floor area, 46 sqm kitchen area and 20 sqm wall area

Small laundry area floor tiling. It is slightly below 0.86m2. I will supply tiles.

Professional tiling a new house 300m2

Raise Outdoor Floor by Approx. 100mm & Install Hybrid Flooring – 18m² I’m looking for an experienced and reliable builder/carpenter/flooring tradesperson to convert my existing outdoor seating area into an extension of my living room. Area: Approximately 4.25m × 4.25m (18.1m²) The existing floor is concrete, but I do not necessarily want to add another concrete layer. I’m interested in a suitable raised timber/steel framing system or other appropriate method to raise the finished floor by approximately 100mm. Scope of work: * Inspect the existing concrete floor and advise on the best method to raise the floor approximately 100mm. * Supply and install suitable framing/support structure. * Install appropriate flooring substrate over the frame. * Install hybrid flooring across the approximately 18.1m² area. * Ensure the finished floor level matches the existing living-room floor as closely as possible. * Install appropriate trims and finish neatly around walls, doors and the transition into the living room. * Consider moisture, ventilation, drainage and waterproofing requirements because the area is currently outdoors. * Ensure the finished floor is solid, level and suitable for normal living-room use. I’m open to recommendations on the best framing system and materials. Please quote for the complete job, including labour and materials, and explain the proposed construction method. I can provide photos and measurements of the existing area and the adjoining living-room floor. Please include examples of similar raised-floor or outdoor-to-indoor conversion work you have completed.

Some floor tiles have lifted

I need a powder room retiled with a tile skirting. The room is 1570mm x 1300mm. The room will have the old tiles removed and ready to tile. Access is available from 7:30am - 17:00hrs. I have attached a sample of the finish and tile in the photos.

Waterproofing, screeding and tiling of small bathroom. About 8m2. Floor tiles 300mm x 600mm. 2 x drains. Room fully stripped.

3 tasks: 1. Remove approx 6 tiles and tile 9 tiles in kitchen 2. Remove tiles and retile laundry floor 3. Remove tiles and retile toilet floor Pics attached I need quotes so have no put in my budget as I’m unsure

Hi, looking for resturant floor tiling around 22 sqm

Replacement of existing floor tiles with 600 x 300 tiles in 2 areas. Approximately 1.8 sqm at double white doors. Approximately 1.9 sqm at hallway with 3 doors.

We have a 2mx1m bathroom floor that we want tiled. We have 600x200 size tiles ready to be used for the job. We intend to tile straight over the top of an old cork floor (which is on a concrete slab). So there's very little prep work required. You would need to provide adhesive and grey coloured grout. We have a tile cutter you can use, if you don't have one.

Lay floor tiles to toilet and laundry just labour , tools and materials on site approximately 7 square meters, person needs to know tiling

I'm looking to get a bathroom repair job done at a property in Footscray. The problem: Water is escaping from around the shower during normal use — specifically hitting the wall tiles next to the shower — and finding its way behind the tiles and leaking out next to the bath tub onto the bathroom floor. This caused the floor tiles to crack over time. We've since had the floor tiles removed to investigate. The wall area next to the shower has been temporarily taped up as a make-safe measure and this has fully stopped the leak. What needs to be done — two parts: 1. Reseal the wall tiles next to the shower (and around the shower tap) with a good-quality silicone or other appropriate sealing product, replacing the temporary tape currently in place. This needs to properly seal the junctions to stop water getting behind the tiles again. 2. Re-lay the bathroom floor tiles. The floor tiles have already been removed and we have spare matching tiles on-site (stored in the backyard) — so this is about laying and grouting the existing tiles, not sourcing new ones. Ideally we'd like one person to handle both parts of the job. Needing to know: - Whether you're able to quote for both jobs, or just the resealing - Your availability in the coming weeks - Roughly what you'd charge for each part Happy to answer any questions or organise an inspection time if that helps with your quote. Thanks,

I’m looking for an experienced tiler to lay new porcelain floor tiles directly over the existing mosaic bathroom floor tiles. The bathroom floor area is less than 10 m². The existing floor tiles are sound and reasonably flat. I would like to avoid removing the existing tiles if possible, so I’m specifically looking for someone experienced in tiling over existing tiles. Work required: * Inspect existing tiles and confirm they are suitable for tiling over * Prepare and clean the existing tiled surface * Apply appropriate primer/adhesive for tiling over existing tiles * Supply and install new porcelain floor tiles * Grout the new tiles * Silicone/seal around appropriate edges and fixtures * Leave the bathroom clean and tidy Tiles: I can supply the new tiles? Area: Less than 10 m² Location: Clayfield I have attached photos showing: 1. The existing bathroom floor 2. The preferred light-grey porcelain tile look 3. A visual example of the proposed result I am looking for a neat, professional finish and someone with demonstrated experience laying tiles over existing tiles. Please provide your labour price and advise whether your quote includes primer, adhesive, grout and silicone. I’m happy to discuss the job and arrange an inspection

Need bathroom floor to be tiled with 600X600 tiles. Just tiling, doesn’t need grouting

Floor requires 900mm x 900mm tiling and water proofing so a shower screen can be fitted afterwards. I can provide the tiles for the job

Need someone to do floor tiling around drain and corners. Area is a bit uneven and will need tile cuts. Some tricky parts near edges and drain. Looking for someone with experience and tools. May take longer than expected. Materials should be supplied by tiler.

We want to tile our backyard with porcelain tiles. Area: 48 sqm. It currently has brick pavers. These will be removed and the area will be concreted with broom finish. I am looking for just tiling quotes. This will include installing tiles and supplying glue, grout, levtec, and silicon. We will supply porcelain tiles ourselves.

Porcelain Stone Fabricator – Build Taj Mahal Sphere Base for Coffee Table I have an 85 × 85 cm Taj Mahal porcelain slab and want a stone fabricator to create a hollow sphere base for a coffee table. Looking for someone experienced with porcelain stone fabrication (mitred joins, cutting and polishing). Requirements: • Fabricate one hollow sphere (approximately 35–45 cm diameter – open to advice). • Use my Taj Mahal porcelain slab. • Clean, nearly invisible joins. • Polished edges to match the porcelain. • Prefer someone who has completed similar stone furniture projects. Tv unit I’d already Taj Mahal marble. Need matching coffee table. See picture for reference

Please drill two holes on bathroom sink for mixer taps. 12mm porcelain bench top

Drill 2 holes on a 15ml porcelain

Looking for someone to repair and rewire two large porcelain lamps, including supplying and fitting all required lamp holders, wiring and electrical components.

I need two outdoor porcelain pavers (20mm thick) cut to size to replace broken tiles on my balcony. One tile needs a straight cut. The other tile needs a straight cut and rectangular notch cut into it to fit around a post (see pics).

Replace a broken tile in alfresco and cut small piece and replace missing corner - spare tiles supplied

I require two mirror cabinets installed on porcelain tiles, cabinets are 1000mm high by 500mm wide and with 14kg each

Tiler Needed – Porcelain Floor Tiling for Sunroom (~19.5m²) Budget is indicative only of happy to consider reasonable quotes based on below scopes! Looking for an experienced tiler with attention to detail to tile our enclosed sunroom. Area: approx. 7.2m × 2.7m (19.5m²) Existing floor: concrete slab, appears generally sound/level. Tiles: 200 × 1200mm rectified wood-look porcelain. We supply: tiles (incl. ~10% extra) and grout. Required work: • Inspect slab before commencing and prepare/clean as required • Lay tiles lengthways along the 7.2m direction • Approx. 1/3 / natural stagger – no 50% brick bond • Narrow, consistent grout joints, preferably 1.5–2mm, subject to manufacturer requirements/tile tolerances • Use appropriate tile levelling system (TLS) for long-format porcelain • Careful set-out for a balanced layout, avoiding unnecessarily narrow cuts • Flat/even finish with minimal lippage • Grout completed floor • Appropriate perimeter/movement joints and flexible sealant where required • Clean, straight cuts and neat finishing around walls and existing aluminium sliding-door frames/tracks • Supply/install suitable transition/edge profile where required • Final clean-up Quote to include: labour, suitable porcelain adhesive, primer, TLS/spacers, flexible sealant, transition/edge profile if required, standard consumables and tools. If significant levelling, crack repair or substrate work is required after inspection, please advise and quote separately before proceeding. Quality finish is important, particularly tile alignment, consistent joints, minimal lippage and neat cuts/finishing. Please advise your experience with long-format porcelain tiles and provide photos of similar work if possible. Budget is indicative only – happy to consider reasonable quotes based on the above scope

Tiling job - I have a kitchen splashback area (never tiled before) 145.6 x 60 cm approx. I have 2x 120 x 60 x0.8 porcelain tiles and 1× 60 x 30 cm tile. I would like to place one large tile centrally in splashback with 13cm approx pieces on either side. No power points.

We have 2 bathrooms a laundry and a toilet. The tiles we purchased are not porous but have a matte, pitted surface that easily gets dirty and traps soap and grease. The tiles are black porcelain. As a trial we want to seal just our toilet. The toilet is 175cm X 130cm. We have a professional cleaning product and a professional sealing product. See photos. This is what we need: 1) Clean the floor and wall edge tiles. 2) Get rid of a all water stains. 3) Get rid of iron stains. 4) Get rid of grout haze. 5) Seal the black tiles.

endura shed has to be installed on porcelain tiles. I will be with the installer as I will be assembling the storage shelves inside the endura. I a, expecting the assembler to screw the shed to the porcelains.

1. There is a small crack in the bathroom. Need a porcelain repair specialist to fix it 2. There is some mold in the tiles. Need to do mold cleaning and do regrouting.

We need a qualified tiler to pave 112 metres. Price to cover labour and associated costs of adhesive, grout and prep (300x300mm porcelain tiles will be provided) to pave directly over existing terracotta tiles of flat ground level access, 2x long pathways and 2x courtyards.

Tiling of shower floor, 900*1000, over existing tiles, excluding hob, maybe using 600*600 porcelain tiles in Carrara

We need someone to install around 44sqm of porcelain tile flooring. You’ll also need to coordinate with our other installer which will be responsible for the engineered timber section of the apartment, and both floors MUST be of the EXACT same level/height. Porcelain tiles will be installed from the end of the corridor to the living, kitchen, and study area. See floorplan attached. We’d also like a separate quote to remove all the carpet and existing flooring (kitchen and entrance, see photos attached.

Fix chipped porcelain sink

I have a small chip in a white bathroom vanity basin/surface that I attempted to repair using a porcelain repair kit. Unfortunately too much filler was applied and the repair area is now more noticeable than the original chip. I’m looking for someone experienced with porcelain/ceramic/bathroom vanity repairs (bath resurfacing, enamel touch-up, chip repair etc.) to properly smooth, blend and refinish the area so it looks neat and discreet. The original damage was very small, and I’d prefer someone who has done similar vanity/basin repairs before rather than general handyman work. Please let me know your experience with porcelain or enamel repairs and what approach you’d take.

Need someone to cut porcelain tile for me

Shower has a porcelain shelf which has smashed but still attached to one of the tiles. Looking for someone to fix the tiles and attach another shelf

I’m looking for an experienced tiler to redo the small splashback area behind my kitchen sink. 📏 Area: approximately 150cm wide × 25cm high (0.375m²). The existing area has old tiles that will need to be removed, and there is some damaged/uneven wall surface that will need to be repaired/prepared before the new tiles go on. The job: • Remove the existing old tiles • Prepare/repair the wall as needed • Install new tiles • Grout and finish neatly • Tiles will be supplied by me • Please include standard adhesive, grout and consumables in your price I haven’t chosen the tiles yet and would appreciate advice on the best tile size/layout for this small area.

I require an experienced tiler to complete a kitchen refresh and fix a couple of minor floor issues. Looking for a professional, clean, and highly detailed finish.The scope of work includes: 1. Kitchen Splashback (Degrout, Regrout & Seal) Preparation: I will remove the rangehood prior to your arrival, leaving wide-open wall access. Stovetop Access: The old sealant around the gas stovetop needs to be sliced and removed. Slide/lift the unit forward slightly so you have access to the bottom row of wall tiles. We are installing a brand new stove later, so there is no need to reseal the stove back down to the countertop. Tiling Work: Scrape out and remove the old, discolored grout from the white tiled splashback lines. Re-grout the splashback lines cleanly and apply a fresh, professional waterproof silicone seal along the base where the tiles meet the black countertop. 2. Floor Tiles (Deep Clean & grout staining/painting) Deep Clean: Give the floor tiles and grout lines a heavy-duty deep clean/scrub in both the main kitchen area and the small entryway alcove to remove built-up dirt and grease. Colour Seal: Apply a professional epoxy-based grout colour sealant to all the floor grout lines to completely refresh the look and lock out future stains. (light gray to match the tile veining). 3. Floor Trim Fix Repair and secure the silver metal transition floor trims framing the tiled zones. They currently have some lifting and sharp edges. Requirements:Please supply the new wall grout, wall silicone sealant, and the floor grout color sealant required for the job. Clean up all dust and debris upon completion.

Office lunch room kitchenette sink area need tiling. Installation only. Will provide the tiles. Flexible on dates. Area is about 1.5 x 1 max.

I need a tiler to supply and install splashback tiles for a small kitchen area. I’m hoping to find someone who has leftover tiles from a previous job that they’d like to use up! Wall Area: 860 mm (H) × 1470 mm (W) Tile Preference: I’m flexible on the exact style/colour, as long as it looks great together. The kitchen wall is white, and the benchtop is beige. Leftover/spare tiles from your previous projects are completely welcome! Scope: Supply tiles, adhesive, and grout, and complete the installation. Timing: Tomorrow or Monday preferred. If you have spare tiles sitting around that would fit this dimension and match the space, please send over an offer with a photo or brief description of what you have!

Budget open for discussion. I’m looking for an experienced specialist tiler for a residential kitchen splash back project. We’ve purchased authentic handmade glazed Moroccan Bejmat tiles 15mm thick, we want a traditional dry-stack/butt-jointed aesthetic. Area is 4 SM…we have 5sm of tiles. Blending-sort and dry laying to balance variation Layout-butt joined-no spacers with manual wedging. Prep-verify the plasterboard is perfectly flat and adhesive is fully covered. Sealing and grout washing-pre-sealing tile faces prior to a fluid fine grout to close any gaps against cooking oils. Precision cuts-wet saw cutting around power points so everything is flush.

Tile splashback, tiles supplied

Looking for a handy tiler to patch a small section of exposed wall behind two newly installed bathroom vanities. I have photos ready to show you the exact space. The Job: - Carefully scrape back the old tile adhesive from the exposed plasterboard strip. - Lay a few rows of basic white square tiles to seamlessly bridge the gap between the existing wall tiles and the new vanities. - Grout the new tiles and apply a clean bead of waterproof silicone where the tiles meet the vanity tops. You will need to supply all materials. This includes a small box of standard, basic glossy white square tiles to match the existing wall, plus the required tile adhesive, grout, and white sanitary silicone. Requirements: - Must have tiling experience to ensure the patch blends nicely with the old wall. - Must bring your own tools (scraper, trowel, tile cutter, caulking gun, etc.) and all materials listed above. - Please leave the bathroom clean and tidy when finished. Looking to get this done as soon as possible. Thank you!

Re-tile a kitchen splashback including a window sill. You will need to remove existing tiles, tile glue etc to get back to bare brick in order that the tiles sit flush with the rendered walls.

Re-tiling of the complete kitchen sink splash back with white gloss tiles , just under 1m2 area. Current tiles are 100 x 200, I can choose a slightly larger tile if it makes the job quicker. I can supply the tiles if needed. I want the whole splash back replaced. A few tiles were removed by plumber to fix a leak. Will require some grinding back of the concrete and removing the remaining tiles. Also require grout and sealant.

I will supply tile Bench top is 2m x 0.6m Subway tiles brick pattern

Tiling a splashback in the laundry. I have the Kit Kat tiles (see photo). Would need to supply everything else. Job required this week before Saturday. Thanks!

Need a laundry splashback tiled All materials provided tiles, glue,spacers etc Carrara tumbled subway tiles 150 x 75 x 10mm The space is roughly 1480mm x 700mm either side of the laundry Total space: 2960mm I will be doing grout, just need tiles laid and trim put in

Looking for an experienced tiler / Handyman / gyprocker to remove our existing kitchen splashback tiles and install new tiles. The splashback area is approx. 71 cm high × 143 cm wide, so just over 1 m². Area has gyprock backing and may need resheeting. Existing tiles are large grey splashback tiles. New tiles are 130 × 130 mm square tiles and I have purchased 2 boxes. I will supply: * tiles * grout * colour matched silicone for the benchtop to tile join I’d like the installer to supply: * tile adhesive/prep products * all tools and equipment * spacers, cutter, etc. The job includes: * removing the existing splashback tiles * repairing/patching/resheeting the gyprock wall if needed * preparing the surface so it is smooth and ready for tiling * installing the new tiles neatly * grouting * silicone seal along the benchtop edge There are power points in the splashback area, so I need someone experienced with neat cutting and working around power points. Photos attached of current splashback and new tiles.

Looking for someone experienced with caulking/silicone to complete a clean, professional white seal between our kitchen benchtop/countertop and splashback. Approximately 5–7 metres total, just one continuous line. White silicone/caulk required, with a neat, smooth and professional finish. Please supply all required materials and tools. Job is ready to be completed ASAP.

Tile laundry Splashback 2.9m x 2 sheets high Tiles are 300 x 300 sheets - 8.5mm thick Over new plaster

Area of approximately 5.1 m2 Kitchen and laundry current splashbacks to be removed and new tiles purchased to be laid.

Tile benchtop with Abi tiles (already purchased) and splash back. Don’t yet have grout or glue.

Had our tiler finish the laundry splashback and sink splashback of our bathroom renovation. Unfortunately some wires were crossed and he used the floor tiles instead of the feature tiles. He is not able to come back to change. Looking for a quote for removal of the tiles and retile with the feature tiles as seen in the last photo. To include grout and silicone.

Looking for an experienced tiler to install new tiles in a small kitchen. - Kitchen floor: approx. 6 m² 600 x 600 - Kitchen splashback also needs to be tiled approx. 1.5 m² 75 x 300 - Existing floor tiles have already been removed - New tiles will be supplied and ready - Looking for a clean and professional finish - Please bring all necessary tools and materials required for installation The job is in an apartment, so work needs to be completed during the building’s permitted working hours. 8 - 4 Please let me know your availability and what is included in your offer

Retiling bathroom wall and floor

The 3x bathroom tiles were loose from the wall. They need to be reglued and fixed on 01/10/26 and has to be exact this date.

Looking for a tiler to do bathroom tiling for me - I have a number of bathroom renovations to do before the end of the year - all bathrooms are different - most around 5s2 floor and around 20/25s2 on walls - some will have mitre some have trim finish all very different - work is around northern beaches and north shore

Size: 7ft x 4.7ft Bathroom needs renovation with proper waterproofing, good-quality wall and floor tiling, and clean finish. I’m looking to keep the overall cost as affordable as possible while still getting a good-quality result. Could you please provide a quote for the complete job, including materials and labour?

Looking to strip paint off tiles in my bathroom where the paint is either already peeling, or has been exposed from a change made to the room, so that it looks like a deliberate design choice rather than damage — exposing the original tiles underneath as a feature. Two small areas: a window sill (a row of around 6 tiles) and a vanity splashback of similar size. The original tiles are ceramic, likely from around 1970, and I want them carefully stripped back to reveal the tile underneath without damaging the glaze or grout — no retiling or respray needed, just clean paint removal. I've attached an AI-generated mockup showing three rough design options I'm considering — I'm looking at either Option 1 + Option 3, OR Option 2 + Option 3, combined. I've also attached a photo of the window sill area, where the paint is already peeling and shows what the original tile looks like underneath. This is a bathroom (wet area), so ideally someone experienced with tile-safe paint stripping (chemical or careful heat-gun method), not general paint removal. Budget is an estimate — happy to hear quotes once you've seen the photos and scope.

I need someone who is familiar with painting bathroom tiles including floor tiles. I know it can be done with the right prep so would prefer someone who has done it before. 2X bathrooms. The current tiles are blue. The vanity has been removed and won’t be installed until the paint has cured.

Bathroom clean up tiles with special bathroom paint

I need the remaining tiles removed and all the screeding leveled , i will remove the rubbish/rubble and dispose of it myself. Should be a quick job for somone with a heavy duty hammer drill. 50% of job already done.

We recently replaced our old spare toilet with a new one and there is a gap where we need tiled. I only have one of the original tiles that matches so I was thinking of using it to do a clean cut around the toilet and line it up with the existing tiles. I have the tile and can get the preparation materials for underneath.

Looking for an experienced and reliable tiler for a tiling job. • Approx. 28m² of wall tiling • Approx. 7m² of floor tiling • Total area: approx. 35m² The job also includes full waterproofing of the required areas before tiling. Tiles will be supplied by us. We need the job to start tomorrow. Please include labour, waterproofing, adhesive, grout and any other required materials in your offer. Please only make an offer if you are available to start tomorrow. Looking for a clean, precise and professional finish.

Looking for an experienced and reliable tiler to install half-height wall tiling in a bathroom/toilet area. Scope of work: Install tiles up to half-wall height on the bare walls around the toilet and shower alcove (approx. 3–4 m² total). Tiles are already on site and supplied (see attached photos). Tasker to supply adhesive, grout, top-edge trim (white/silver), and silicone. Proper cuts around corners, edges, and skirting. Clean finish, grouting, and silicone sealing at joins. Photos attached

Hi we are needing our small bathroom tiled with 400x400mm floor tiles. We are doing the wall tiles ourself

Looking for an experienced handyman/painter to complete two small home maintenance jobs – a bathroom tile refresh and kitchen skirting/kickboard painting. 1. Bathroom tile grout refresh Refresh the white grout between the existing bathroom floor tiles. The floor is approximately 1.5m × 2.5m (3.75m²) with small square tiles. This is a cosmetic grout refresh, applying fresh white grout over the existing grout lines to brighten and freshen their appearance. This is not a full regrouting job. The shower has been done about 6 weeks ago with same solution and looks good. I will have the floor pre-cleaned ready for you. I only need the white grout applied neatly over the existing lines with excess cleaned from the tiles. I will supply: Dunlop Ready-to-Go White Coloured Grout 800g Grout smoothing/application tool 2. Kitchen skirting/kickboard paint over in white approx 2 meters x 15cm tall. Paint the existing grey skirting/kickboard along the bottom as shown in the photo. Paint and undercoat with brush and tray supplied including masking tape. Tasker to bring: Bucket Sponge/cloths Any other basic equipment required to complete. Photos show both areas and their current condition. Please only comment if you are interested in the job. Location: Concord NSW 2137

Title removal and possibly assistance with tiling. It is a small shower area 1000 by 1000. Floor toiles and wall tiles must be removed. I can provide tools if need be. I will dispose of rubbish myself simply just looking for a labor. I run a busy handyman business. Based in Fremantle if this job goes well there is a good opportunity for further work If you are interested

Looking for someone to complete a demolition and waste removal job for a 6m2 room in Success.The task includes:Tile Layer Removal: Fracturing and popping the top surface finish away from the floor bed.Screed Bed Demolition: Jackhammering the thick underlying sand-and-cement mortar bed right down to the solid concrete slab.Waste Removal & Clean Up: Shoveling, clearing, and loading all the rubble into your own vehicle/trailer and carting it away.also remove toilet and plug it

Bathroom tile and wall repair needed. A few tiles near the shower are lifting away from the wall, grout is missing in places along the top row and a corner, and there’s cracked plaster above the tile line. Looking for someone experienced to fix. Photos attached.

Need the soup basin on side of shower replaced

An Experienced Tiler needed for a quick repair job. We need one soap holder to be replaced without affecting the surrounding tiles and regrouting around the new soap holder. Replacement Soap Holder provided. We’ll need you to bring your tools and grout please.

I leant on my vanity and the tiles came away one cracked. Needs fixing please. We live in a rental. Looking to fix the seal at the very least.

Looking for an experienced handyman to install a few bathroom accessories. * Install 2 × 80cm towel rails - Bath 1 * Install 1 × 60cm towel rail - Bath 2 * Install 2 × robe hooks - Bath 1 All accessories will be supplied. Everything is being installed onto bathroom tiled walls, so looking for someone experienced drilling into tiles with the right tools to avoid chipping or cracking.