Find a professional tiler near you

Tiling on shower base and toilet floor

The need more space on bathroom. So uproot the bathtub and complete the by fixing floor tiles and wall tiles. You buy tiles and whatever is required

It's a three-level house with 5 bedrooms and 7 bathrooms. We need to do the sand levelling, tiles and marble installation for all the bathrooms, corridors and living room areas. The project needs to start in July or August.

Replace 1 X 390mmx390mm broken tile.

Looking at quotes for floor tiling 52 square metres cheers

Small ensuite needs retiling, floor and shower recess plus one line of tile up the wall. Believe it is possible to tile over existing.

I need my roof top terrace floor tiled. I have the 600x600x10mm tiles. I need a strip drain cut in and installed and the screed falls done and tiled. Area 30m2

Need a professional tiler to install 6m2 of floor tiles , tiles are 325mmx325mm Will need to screws for shower area which is 1m x1.8m with drain in centre. Waterproofer already organised.cement sheeting will be installed Monday.

Tiling laundry and toilet floor over existing floor, skirt tiles to be done also I will supply tiles and pull off existing skirting tiles

Hi there need the two areas in the photos floor tiled. Clips to be used. Area one - 6400mmx4400mm ( kitchen kickers will be in Area two - 1300mmx2000mm - front entry way Tiles on site 600x600

Need a platform tiled for a hair salon. Waterproofing has already been done. Approx 14 square meters. I have the tiles but will need you to supply the grout and tools.

Floor Tiling work. Replace nine 60x60cm tiles after some plumbing work. Great if you can get the tiles. Examples of tiles in photo attached. These tiles will be ripped out for plumbing work. The floor will be concreted again for the new tiles.

Floor tiles in shop front

I’m looking for an experienced flooring installer to replace my existing tiled flooring (approx. 40 square metres) with vinyl timber planks (hybrid or luxury vinyl – open to recommendation). The property is an apartment in Chermside, Brisbane. The area includes living room, kitchen and hallway spaces (no bathrooms). Scope of work required: • Inspect existing tiled floor • Advise whether tiles need to be removed or if vinyl can be laid over them • Supply and install vinyl timber flooring (or assist me in purchasing suitable materials) • Help with underlay selection if required • Remove and dispose of old tiles if necessary • Install trims, transitions and skirting adjustments if required • Ensure level finish and clean workmanship I would really appreciate guidance on: • Which vinyl timber flooring brand/type to purchase • Where to buy (Bunnings / local flooring supplier etc.) • Best option for durability and value for money Timing: Ideally looking to complete within the next 1–2 months, but flexible for the right installer. Please provide: • Rough estimate per m² installed • Whether you supply materials or install only • Timeline • Previous similar job photos if available Access: Apartment with lift access and easy parking nearby. Looking for someone reliable, experienced and detail-oriented.

Pull up carpet and tile area Approx 10sqm Already have tiles 900 x 450

We have all the glues, trowled on base and back butter to each piece as they are irregular in size 10mm grout lines in white grout Two types of sealers Once laid wait 7 days before grouting Then second sealer after that Need someone who has experience with tong irregular terracotta. Please quote room in photos.

I need to tile the concrete section of my granny flat.

I’m looking for a qualified professional to help transform my Alfresco area into a fully enclosed, multi-purpose space. The job involves: Sliding Glass Doors / Windows Installation Supply and install quality sliding glass doors (or windows, based on recommendation). Ensure maximum natural light and good ventilation. Frame and sealing to meet building standards. Tiling Supply and lay floor tiles across the Alfresco area. Tiles should be durable, easy to clean, and suitable for multi-purpose use (lab, gym, play area). Include tile insert drainage cover to integrate with existing waste outlet. Drainage Maintain existing drainage point located near the wall. Ensure tiling is finished with correct falls toward the drain. Space Details: Alfresco area is approximately [3.0 m x 2.53 m]. Existing concrete slab with stepdown. Current layout available on house drawings (can be shared on request). Requirements: Must have experience in door installation, tiling, and waterproofing. Provide all materials and tools (unless otherwise agreed).

We have had some tiling completed and need about an inch taken off the bottom of 2 timber doors so that they can be re-hung. Not a huge job, but I don’t have the tools to do it.

Indoor tiling over the top of existing tiles. Approx 28-30sqm. Tiles 600x600 and grout already purchased.

Need 12 porcelain tiles cut to fit to fill in gaps in our partly completed kitchen splashback, as we don’t have a tile cutter ( and would prefer not to buy one for this small job). Tiles are of course, supplied, and just need cutting to specific dimensions.

Cut 60mm whole in porcelain stone slab

Please accept this request for quote - refer to original listing for details.

As listed in original listing - to come down to site to provide an accurate quote

As listed in original listing - to come down to site to provide an accurate quote

We need to get tiles installed on a 1620x900x2500mm shower stall, in which a 1500x900x30mm shower basin will be positioned. The shower has a small niche to complete as part of the job. Please provide a quote for the two types of tiles listed in the quote (see third screenshot), including all cutting, installing, waterproofing and making good of any defects detected.

The waterfall side of my benchtop is developing a crack along the joint. It appears that the adhesive bond between the two pieces is failing. I suspect the waterfall panel does not have proper structural support where it attaches to the cabinet, so the weight has been carried mainly by the joint, which has led to this issue. I’m looking for someone experienced with porcelain/stone benchtops to assess and fix it properly.

i have a family porcelain horse that has been in the family forever. its not worth anything but i would like it put back together and then painted gold

Looking for a quote for installation of a porcelain benchtop for an outdoor alfresco area including a BBQ cutout Details are: - Porcelain stone from Stone Ambassador (Cat 1) - L shape, approx measurement is 2.7m x 2.6m lengths from corner x 0.6m deep -0.9m high for end panels / waterfall - timeframe: if you have availability before Saturday 21st March, that would be amazing but understand if not and would still be interested in getting a quote for a later date - BBQ cutout (27cm vertically down), sink and tap cutout, and benchtop to go over bar fridge

I've tried Lithofin Intensive cleaner and Stain stop sealer, some places it's worked, others not so. Did not use mechanical scrubber. Tiles are Lappato semi polished ONLY tile professionals need apply, not a DIY or handyman - please dont waste my time or yours. thank you

I'm having a bidet toilet seat installed. The water supply is inside the cistern and I need a hole in the side which will allow for a hose to pass through.

The porcelain outdoor tile that covers the pool filter has cracked. We require one tile cut to size to fit into the metal frame with a groove ( see picture) also cut for the key to be used to lift the tile. We have the tile. Just require it to be cut.

Hello! I need 1 porcelain tile cut and then replaced for an existing damaged tile and then installed in kitchen. We have the replacement tile but they are the larger square size, so will need to be cut. Please see photos for size of complete tiles and how it needs to be cut Job is in Runaway Bay in apartment (underground parking, however up 2 flights of stairs). Can come collect tile and cut offsite if you need

We are needing to get 2 x porcelain whiteboards installed by EOD Friday the 13th Feb, between the hours of 9-5:30pm in Cremorne (right next to Richmond station). The whiteboards are 2400 x 1200mm and come with required mounting fixtures. These are to be mounted on standard office plaster walls, using the included landscape installation baton. Please reach out with any clarifying questions or further detail.

Need to be careful not to crack the porcelain tiles (12 mm thick)

! I’m looking for an experienced tiler to tile a small bathroom wall section. Wall size: approx. 73cm wide x 227cm high (Photos attached) Tiles: Supplied (same style as shown in reference photo) Grout: Supplied I’d like the tiles laid in the same staggered / random pattern as the sample. ⸻ What needs doing • Prepare wall surface (ensure clean, level, ready for tiling) • Tile the wall section neatly • Cut tiles as needed around edges/fixtures • Grout and finish cleanly • Silicone/seal edges where required • Leave area tidy afterwards ⸻ Notes • This is a small wall, but I want a high-quality finish (straight lines, even spacing, clean cuts). • Please bring your own tools. • I supply tiles + grout

Kitchen benchtop chip repair (as neatly as practical/possible). Please refer to the photos. 12mm Porcelain (substrate under) Off-white colour Happy to discuss options and pay in a separate transaction to Airtasker to save fees for both of us.

Slate tile removal (optional): please quote separately Supply tiles (Optional): please quote separately Scope of Works 1️⃣ Optional – Existing Slate Tile Removal (separate price) Remove existing slate tiles from pool surrounds Dispose of all waste off-site Grind/clean slab after removal Inspect and advise on slab condition 2️⃣ Surface Preparation Grind/clean concrete substrate Remove contaminants and adhesive residue Prepare slab suitable for external waterproofing and tiling Form correct falls away from pool 3️⃣ Waterproofing Supply & apply external-grade waterproofing membrane suitable for: Outdoor use Pool surrounds Salt pool exposure Waterproof entire tiled area Turn the membrane up at walls, steps, edges, and penetrations Install in accordance with AS 3958 and manufacturer specifications Provide: Waterproofing certificate Product data sheet Installer warranty 4️⃣ Tiling Lay outdoor-rated porcelain tiles Slip rating P4 or P5 Use external-grade flexible adhesive Install movement joints and flexible sealant Neat cuts around pool edge, drains, steps, and penetrations 5️⃣ Grouting & Finishing External UV-stable grout Silicone to movement joints (colour-matched) Final clean and haze removal Seal tiles only if required by tile manufacturer Tiles Porcelain tiles only Outdoor / pool rated Size 300x300 to be confirmed (open to tiler advice for budget efficiency) Option for Tiles supplied by owner, quote saparately Requirements Proven experience with external pool surrounds Compliance with AS 3958 Waterproofing certificate required Public liability insurance Photos or references of similar work Pricing Please provide: Lump sum quote Separate line items for: Slate removal Waterproofing Supply Tiles Tiling labour Clearly state exclusions (major slab repairs, screeding, coping replacement, drainage works) Site Notes Good access Outdoor work – weather dependent Owner builder on site Looking for reliable, professional workmanship, not rushed or shortcut jobs

Looking for a skilled handyman / repairer to fix a chip in a porcelain bathroom sink. The chip is visible and I’ve attached a photo for reference. Ideally after someone experienced with porcelain or ceramic repairs so it can be blended and sealed properly. Need done asap

I need some 600x600 porcelain tiles cut into 600x100 tiles. 32 tiles total. 160 cuts. Last tasker never replied after being booked!!! so have cancelled that task and reposting Tiles can be dropped to you pending location. Or if you want you can come and do it at my house in Williamstown

Fill and blend small chips in the engineered stone splashback to restore a smooth finish.

Remove existing dark tiles from full splashback area Prep the wall ready for new tiles install new tiles (I can supply) Grout and silicone finish Reinstall 3 x double power points (GPOs) to suit new tiles

Remove 6m of mosaic tile feature strip in kitchen splashback and replace with a woodlook or travertine tile feature tiles strip

Looking to get a quote on tiling a kitchen splashback

I’ve recently repainted my kitchen and want to cover the existing wall tiles with acrylic splashback sheets. I need an experienced installer/handyman who can measure, cut, and install the acrylic panels neatly. Scope of work: * Measure the splashback area * Cut acrylic sheets to size (including clean cutouts for power points) * Supply appropriate adhesive suitable for acrylic * Install panels over existing tiles * Silicone all edges for a clean, sealed finish * Ensure neat alignment around benchtops, corners, and cabinetry * Bring all tools required for cutting acrylic and installing Materials: * Acrylic sheets supplied by me * Installer to supply adhesive and silicone Timing: Flexible — ideally within the next week. Experience required: * Confident cutting acrylic cleanly * Experience with splashback installation * Able to work around power points safely

Need kitchen splash back done- approx 2.5 m long and 1m high. Tiles provided. Need done by experienced tiler today

Tiles will provided need to cut and install. 3meters long X 1.5 meters height

Need a tiler to assist with a kitchen splash back. Tiles and adhesive held already. 750x150 tiles.

Hello, I need someone to tile my kitchen splashback. It is 115cm x 64.5cm. It is currently fibreglass - welcome your advice on whether you need to remove that or can tile on top. There is a powerpoint which you will need to tile around. Photos attached. The tiles are 10cm x 10cm zellige tiles from Tiles of Ezra. Preferably this Friday before 2pm but I can also do over the long weekend, or another time.

Looking for an experienced tiler to install a kitchen splashback tomorrow. Scope of works: • Approx. 3m² kitchen splashback (areas marked in red in attached photo) • Bench to overhead cupboard height • Includes internal corner and return beside cooktop • Power point cut outs required Tiles will be supplied by us. Tiler to supply adhesive, grout and all tools. Walls are painted plasterboard and ready for installation. Access available from 2pm tkmorrow Seeking an experienced tiler with attention to detail as this is a visible kitchen feature.

Tiling for new splasback. 1.5 sqr meters.

I will supply the tiles - see photos for details. Tile kitchen splash back approx 1m2 area in total. Also tile bathroom inset strip drain. Located 45 mins north of Sydney harbour bridge

Remove and install splashback (tiles supplied) existing wall must remain damage free to allow for the new tiles. Remove existing splashback. Replace with new tiles supplied. The power will be off to power points. You'll need to cut the tiles and supply grout. The size is 2.17 sqm (3.29 meters wide X 0.66 meters high) Grout and seal the new splashback

I need a splashback installed for a cafe counter. It’s a 3m straight wall and the height will be 60cm. I will supply the granite stones (60x30).

Note: If you are going to submit a ridiculously offer, please do not bother. Looking for an experienced tiler to install four large-format porcelain tiles (1200 x 600) as a kitchen splashback. Scope of works: • Install 4 × 1200 x 600 polished porcelain tiles on kitchen wall • Wall is plasterboard and accessible • Tiles already purchased • Cutting required for fit and possibly power points • Neat finish required, including exposed edge (tile trim or agreed finish) • Grouting included Timing: • Kitchen is been installed on Friday and tiles will be installed once the kitchen is installed • Timing can be coordinated once kitchen installation date is confirmed Important notes: • Experience with large-format tiles essential • Must have own tools (wet saw / porcelain blade) • Job is small but needs to be done properly Located in Frankston, VIC. Flexible timing once kitchen is in. Please quote your price and include examples or mention experience with large tiles.

Recent kitchen bench top replacement. Bottom splash back tiles need replacing to accommodate new size.

I need help installing splashback/tiles behind the water tap. Wash basin is 82cm long. We are installing a mirror cabinet above the sink and since it’s behind the sink, we are advised to install a bottom layer of splashback to prevent water leakage/damage. I do not need the entire wall tiled. Only 4 x 20.5cm tiles behind the water tap.

This is a tiling work for a laundry splash back. The tiling area is about 3.40 sqm. Tiles photo is attached, 6-sided (hexagon) tile, and tiles and grout are provided. We will need to cut the tiles Thanks

Complete splashback tiling. Tiles provided. Subway tiles Wall 1 Wall length 2560 Splashback height 460 Wall 2 Wall length 2340 Splashback height 460

Need the pictured area to be tiled. We have tiles already (pictured) but need grout and silicone supplied.

Old grout to be removed and replaced with new anti-mould translucent grout sealant

Tiling of a splash back behind vanity

Need to regrout and seal the tiles in the shower/bathroom

Tile resurfacing for bathroom, including shower. Plain white to help tiles look fresh.

Two holes from an old towel rack need to be fixed and blended so that they are unnoticeable. Have had this done before in our spare bathroom, and it was amazing - but our lady has moved overseas. Shouldn’t take longer than an hour. Holes the size of a 5-10 cent piece.

Standing shower area tiles need a regrout, area is small.

Secure and grout a singular fallen tile from the top of a window frame in the bathroom. Preferably over the weekend, can cross check timings through the week.

Retile a small bathroom 3 square meters

Looking for a tiler to install three replacement tiles in a bathroom. Old tiles already removed We will supply white tiles (original tiles unavailable) Tiles will need to be cut to fit Install tiles neatly and securely Small, quick job — ideal for someone local. Please bring your own tools. Budget-conscious, thank you.

My new shower and the rail is larger than the old one and I need new screws and the attachment drilled into tiles. Must have experience with tools and bathroom tiles, really don’t want it cracked!

my upstairs bathroom has a tile that has broken. it is not inside the shower, it is outside it. i suspect there’s an issue with how the tiling was done

We snapped a screw from our towel rail which we can’t get out. Need someone to remove old screw, fill hole and drill a new hole above it.

We are looking are looking for a Tiler or a Handyman to replace a 3 broken bathtub tiles and 2-4 toilet tiles, and regrout bathroom and toilet, as per photos. Tiles have not been sourced yet, looking for recommendations as unlikely to match perfectly - close enough to the existing tiles is fine by us. Bathroom is roughly 2.5 x 2m and separate toilet is 1 x 2m

I may need replace the 2-3 tiles with cracks or just use water proof grout to seal the tiles. And just re grout all the tiles where you can see the grout is missing. Most importantly the lower area will need grout in it. Also double water proof.

I want to remove the old grout between the bathroom floor tiles and the wall tiles and re-grout the gaps.

I need a handyman to remove a metal wall bracket that holds broken glass. The metal channel is full of shattered tempered glass. You will likely need to chip the glass out of the channel to access the mounting screws behind it. It is mounted on bathroom tiles. Please be careful not to crack the tiles during removal.

Bathroom tiler left without finishing the job, just need a gold metal waterstop strip fixed to the edge of the tiles where it meets the carpet in the doorway. 3 rooms.

1 side of Bathroom tile needs to be re-sealed. Currently, water seeps into it, and when pressed water comes out of the small holes.