A professional helping with water heater installation and repair.
A professional helping with water heater installation and repair.

Find a professional hot water system contractor in East Melbourne

Fill in a short form and get free quotes for local hot water system contractors in East Melbourne

4.2

Great rating - 4.2/5 (11114+ reviews)

Looking for hot water system contractors?

  • Gas system
  • Electric systems
  • Boilers
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated hot water system installers near me

Recent Hot Water System Installation & Repair reviews in East Melbourne

Smooth communication, great job, highly recommended

Hot Water Tank Leakage

$150

Got it sorted

Hot water tank intermittently working

$175

On time and quick diagnosis and remedy solution thanks a lot

Leaking instant hot water service

$50

Efficient and knowledgable

Fix hot water supply line

$80

Thank you. Job was done without any problems- great communication.

Dispose of old hot water system

$100

nice and efficient man

To replace the pressure and temperature relief valve of hot water

$100

What's the average cost of a hot water system installer in East Melbourne

$141 - $297

low

$141

median

$200

high

$297

Low, median and high bar chart distribuiton

Average reviews for Hot Water System Installation & Repair Services in East Melbourne

based on 59 reviews

4.93

56
2
1
0
0

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

84+

Tasks successfully completed

3

Average amount of offers per task

4

 mins

Average time to receive offers

Statistics from the most recent tasks on Airtasker over the last 4 years.

What do hot water system installation services include?

Hot water system installation services include all the activities necessary to put a reliable, safe hot water system in your home. This involves installing an unvented hot water system, inspecting the installation area, preparing materials, installing the cylinder or tank, then making the needed connections. After the installation, your plumber can test the system for flaws and address them as needed.

Inspecting installation area

Your water heater installation begins with a thorough inspection of the spot that will house the tank and its components. Your plumber makes sure that the floor is robust enough to support the cylinder's weight and complies with established building codes and safety rules and regulations. If the allotted space is deemed insufficient for the cylinder, your plumber can help you look for an alternative spot for the unvented cylinder service. 

Preparing for installation 

Your plumber makes the necessary preparations for the hot water cylinder installation. If necessary, some plumbers may offer to make an improvised platform of sturdy materials to support the tank's weight. Otherwise, you can hire a Tasker to handle all your carpentry needs.

When appropriate, your hired plumber shuts off the power, gas, and water supply before starting the job. They can take all the necessary measurements to determine the right amount of materials, then cuts and bends wires and pipes to the appropriate lengths and widths. Your plumber may also cut holes into walls or floors as needed to allow pipes or wires to run through.

Installing the cylinder

Once the cylinder's space is ready, your plumber can proceed with the unvented hot water cylinder installation. They can place the cylinder or tank onto its designated space and position. Your plumber takes care not to damage any of the components of the vented hot water cylinder or other pipes and wires in its surroundings.

Installing components and pipes

After the cylinder is in position, your specialist proceeds with attaching the appropriate pipes, wires and components like the Temperature and Pressure Release valve, expansion vessel, immersion heater, and any other pipes and valves. As with all other stages of the unvented cylinder installation, they use appropriate materials and techniques that are compliant with state safety and building regulations and industry best practices. 

Testing the system

Your hired plumber tests the system after completing the installation. They check that each tap and shower head provides hot water on demand and flows with consistent pressure. Should variations in temperature or pressure arise, your plumber can troubleshoot the system and do the appropriate fixes. 

They repeat this process until the hot water system works without any issues. And now that your home has hot water running through your taps, tubs, and showers, why not ensure greater warmth and comfort in every room of your home? On Airtasker, you can also hire an insulation installer who can help you cut down on bills and achieve year-round comfort.

Recent Hot Water System Installation & Repair tasks in East Melbourne

Supply and install tempering valve on gas hot water system

$250

Burwood East VIC 3151, Australia

6th Apr 2026

I would like to have a hot water tempering valve installed on the existing old gas hot water system. Looking for a licensed plumber to supply and carry out the installation who is able provide receipt and Compliance certificate upon completion.

Ptr valve needs replacing hot water

$150

Templestowe Lower VIC 3107, Australia

5th Apr 2026

Ptr valve leaking needs replaceing

Thank you for your work!

Install tempering valve to regulate hot water temperature

$100

Box Hill VIC 3128, Australia

3rd Apr 2026

I need a licensed plumber to install a tempering valve on my gas hot water system to regulate water temperature and ensure it complies with Victorian rental safety standards (max ~50°C at outlets). Currently, the hot water temperature is too high and needs to be safely regulated. Scope of work: Supply and install a suitable tempering (mixing) valve Connect to existing hot water system (gas) Adjust and test temperature to ~50°C at taps Replace existing isolation valve with new ball valve Ensure installation meets Victorian compliance requirements Check for leaks and proper operation Requirements: Must be a licensed plumber Experience installing tempering valves Provide all materials and tools Compliance with Australian standards and compliance certificate

Rheem Gas Hot Water System Repair- pilot not lighting

$200

Kew VIC, Australia

2nd Apr 2026

Pilot won’t light on Rheem Stellar—likely thermocouple or pilot blockage

Hot water Gas & Solar system heating issue

$200

Blackburn VIC 3130, Australia

2nd Apr 2026

1. The shower and tap is not regulating the cold and hot water properly. 2. The hot water pressue is really low in shower and all taps around the house.

Gas hot water system pilot out

$50

Balwyn North VIC 3104, Australia

30th Mar 2026

Gas hot water system pilot not lighting. Have tried numerous times

Great job! Mark was professional, and completed the gas plumbing work quickly and to a high standard. Would definitely recommend.

Electric hot water tank 160L and install in first floor on wardrobe

$10

Doncaster East VIC 3109, Australia

29th Mar 2026

I am looking for a qualified plumber to handle the supply and installation of a 160‑litre electric hot water system. The new unit needs to be installed inside the built‑in wardrobe of the master bedroom. The job also requires disconnecting the existing hot water system and taking it away for disposal. Please provide your availability and an estimated cost for the complete job, including materials and installation.

Replace hot water washer tap in kitchen

$50

Burwood VIC, Australia

20th Mar 2026

The hot water tap in kitchen will not turn off needs new washer.

Mehdi was excellent attended task very quickly and he completed the job in a very confident manner. I am very happy with the task completed and Mehdi was very competent and easy to communicate with.

Gas hot water system leaking need repair

$150

Camberwell VIC 3124, Australia

1st Mar 2026

Gas hot water system leaking

Mark completed the job efficiently

Hot water system plumbing overflowing

$400

Hawthorn VIC 3122, Australia

27th Feb 2026

Plumber needed Hot water system overflowing after washing machine installation. It appears something may be wrong with the plumbing connection or drainage and the system is now leaking or overflowing. We need someone experienced with plumbing or hot water systems to inspect and fix the issue as soon as possible. The job must be completed by the weekend at the absolute latest. Please only apply if you have experience dealing with hot water systems and washing machine plumbing connections.

Fix Rheem hot water

$50

Kew VIC, Australia

23rd Feb 2026

Ever since it was turned off once and then turned back on, there has been no hot water. The unit was only replaced a few years ago.

Check and replace solar hot water panel frost valve

$250

Burwood VIC, Australia

3rd Feb 2026

Our hot water solar panel for solar assisted gas hot water system is leaking at night and in the morning. We assume the Frost valve needs replacing. Need someone to confirm the problem & fix. We will pay cost of replacement parts. Two storey modern house with tiled roof and easy access.

Daniel is easy to work & communicate with. Replaced a frost valve on hot water solar panel.

J148303 - Need someone to set tempering valve in a Hot water system

$70

Kew VIC, Australia

30th Jan 2026

Need someone to turn the tempering valve to set hot and cold water ratio on a hot water system

Repair/replace leaking braided hose on hot water system

$300

Box Hill North VIC 3129, Australia

26th Jan 2026

Leaking braided hose on hot water system. Needs repairing/replacing.

Completed task as requested. Timely, efficient and good to deal with.

Hot water tank - pressure relief value replacement

$175

Mont Albert VIC, Australia

25th Jan 2026

I have an AquaMax 390 gas hot water system. The pressure relief value has been leaking for some time and now it has got worse to the point it needs to be replaced.

Switched over a pressure release value on my hot water tank. Arrived on time, excellent communication. Really easy to work with. Thanks.

Fix leaking copper pipe on solar hot water system

$70

Camberwell VIC 3124, Australia

9th Jan 2026

There is a leak on the copper pipe connected to my solar hot water system. Water is spraying from the side of the copper pipe near a bend (looks like a split/pinhole), not just dripping from a relief/drain line. I need someone to diagnose and repair properly (likely cut out and replace the damaged copper section and fittings), and confirm no other leaks. What I need done: Inspect leak on solar hot water copper pipework (external). Isolate system safely if required. Repair/replace damaged copper pipe section and any failed fittings. Pressure test / check for further leaks after repair. Advise if any valves (e.g., relief valve) look faulty and need replacement (quote separately if extra parts required).

Excellent service and super responsive for solving the issue.

Hot water System uninstall and Install

$500

Balwyn North VIC 3104, Australia

5th Jan 2026

Hot water system to be removed and installed in another house. Offers welcome.

Hot water system repair

$300

Box Hill South VIC 3128, Australia

22nd Dec 2025

Our hot water system, which we've used for ten years, has started to cool down. This may require a system inspection and replacement of the temperature valve.

No hot water at 2 taps

$100

Mont Albert VIC 3127, Australia

18th Dec 2025

Two taps are not getting hot water. All other taps are working fine and even the dishwasher has hot water. Looks isolated to these two outlets. Need someone to check and fix this urgently, preferably tonight if possible.

Plumber for hot water

$250

Surrey Hills VIC, Australia

18th Dec 2025

Hi need someone to fix hot water for 2 taps. Location 3127 Victoria near boxhill