Find a professional hot water system contractor in East Melbourne

I have a small leak on a copper pipe on top of my outdoor gas water heating setup. Photos attached. Please quote me and let me know your next availability or any other info you need

Laundry sink hot water pipe to be fixed -+ tap lose a bit , might need a repair

My gas hot water system has stopped producing hot water and is now cold. Looking for a licensed plumber/gasfitter to: • Diagnose the issue • Repair if possible • Provide a quote before any major work Details: • Gas cooktop in the house is working normally • Hot water system is an Everhot gas storage unit • Located in Bulleen Please let me know your availability and experience with gas hot water systems.

The old hot water system in my investment property has frequently failed. RACV home emergency was called to inspect and we were told the thermocouple needs to be replaced. The work needs to be done ASAP. If at the site you find out there are more parts that need replacement, we can also discuss the options then.

Leaking hot water system Please see photos for brand

Hot water coming out from heat pump with very small pressure

Ever since it was turned off once and then turned back on, there has been no hot water. The unit was only replaced a few years ago.

A hot water pipe under the house is leaking, it continues to leak even though I have no water running in the house

Issue with gas supply to exterior hot water service

Fix leaks in the cold water inject to the hot water machine

Please specify if you are offering labour only or supply also. Installation of a 26L Rheem Gas Instant hot water system.

Hot water system keeps turning the fuse for the hot water off. Whenever I switch it back on it immediately switches itself back off again. Looking for someone to diagnose and fix the issue as I’m currently without hot water.

The old one has a leak and need to be replaced. I need someone to install a new Rheem Electric Hot Water unit 315 litre 3.6 KW internally (inside the house).

I would like to have a hot water tempering valve installed on the existing old gas hot water system. Looking for a licensed plumber to supply and carry out the installation who is able provide receipt and Compliance certificate upon completion.

Ptr valve leaking needs replaceing

I need a licensed plumber to install a tempering valve on my gas hot water system to regulate water temperature and ensure it complies with Victorian rental safety standards (max ~50°C at outlets). Currently, the hot water temperature is too high and needs to be safely regulated. Scope of work: Supply and install a suitable tempering (mixing) valve Connect to existing hot water system (gas) Adjust and test temperature to ~50°C at taps Replace existing isolation valve with new ball valve Ensure installation meets Victorian compliance requirements Check for leaks and proper operation Requirements: Must be a licensed plumber Experience installing tempering valves Provide all materials and tools Compliance with Australian standards and compliance certificate

Pilot won’t light on Rheem Stellar—likely thermocouple or pilot blockage

1. The shower and tap is not regulating the cold and hot water properly. 2. The hot water pressue is really low in shower and all taps around the house.

Gas hot water system pilot not lighting. Have tried numerous times

I have an AquaMax 390 gas hot water system. The pressure relief value has been leaking for some time and now it has got worse to the point it needs to be replaced.