Find professional local plasterers in Sydney Eastern Suburbs

Gyprock wall metal frame and door, frame, skirting and cornice. Measures 2.5m x 3m approx.

Looking for a quote/complete some plasterboard and plastering work in a few areas of the house. Mix of large/medium/small fixes: 1. Under the stairs - replacement board 2. On the stairs - replacement board where the damage section is 3. Small areas of kitchen - 2 floor level areas with damage 4. Remove the airing cupboard in bedroom/hallway and add replacement boards to make wall flush 5. Ceiling - small section damage

Hey guys, We have a Gyprock wall that we need to take down and remove from our premises. It seems to be quite weak, so it should be a fairly straightforward job. We would need the work to be done around 5:00 PM, and we are located in Bondi Beach. Please let us know if you have any availability. Thank you!

Need to recover / plaster over a curtain bracket that was pulled down and so has ripped

Hi, I need a reliable handyman or plasterer to fix a some damage to my interior drywall. 3 Locations: 10x10cm, 15x5cm, 2x2cm. I've attached images. We have matching paint. Location: Read St, Bronte, NSW. We have easy parking in our garage onRead Ln. Please let me know your price for the job and how you'd plan on fixing. Thanks!

Supply material and replace false ceiling (2000mm x 400mm), cut out for exhaust fan (200mm-240mm) and plaster ready for painting. Prefer is fast compound can be used to complete the job in one visit.

I’m looking for a quote to set and sand a gyprock ceiling. 1.6m x 2.0m. The gyprock is already installed, and is set up for a shadow line trim. I have the shadow line trim on site.

Patch and plaster hole in my wall.

Hang mirror + patch small hole | Coogee 2034 Looking for a handyman for a small job in my studio apartment in Coogee: - Hang an 80 cm round mirror (4.75 kg) on a plasterboard/gyprock wall - Patch a small damaged hole from a previous attempt to hang the mirror - Please bring suitable plasterboard fixings, tools and patching materials Photos attached Please quote including materials. Should be a quick job for someone experienced.

Seeking a gybrocker to gybrock 1) BOTH sides of the a separation wall that our carpenter will build. The separation wall is - 4m x 2.67m 2) A small ceiling gap of 3m x 0.3m

Opening a store & need help getting some things ready. - patching holes in wall - installing hanging rails for rug - remove carpet - remove/patch mould

Repairs to plaster ceiling for painting. Roughly 30 cm by 50 at widest and longest points for scale.

Ceiling plaster repair, small water damaged area of plaster to be repaired in bathroom ceiling

I removed a built-in wardrobe/cupboard next to the living room. I'm looking for an experienced plasterer to repair and plaster the walls and ceiling where the wardrobe was installed. The job includes: Primer/sealer preparation Base coat and finish coat plastering Sanding, ready for painting No painting is required, as I'll be doing that myself. Thanks.

Looking for 10mm plaster sheets installed with glue. We have a room that need plastering as it’s too rough to paint. Just one full wall and half a wall. À book shelves to cover centre wall and side walls. - [ ] Centre wall- 3.23 wide / 2.7 height(meters) - [ ] Left wall - 2.41 wide / 1.16 height (meters) The photo shows the original gray concrete wall that requires the plaster sheets.

we need two paintings hung up and one light mirror!

Site inspection and preparation * Supply and install moisture-resistant Gyprock ceiling sheeting * Reinstate ceiling section and secure to existing framing * Tape and set all joints * Sand and prepare surface for painting * Apply sealer undercoat and two finish coats of ceiling paint

Unfortunately, my 75-inch TV fell off the wall. I have some holes to fix. It’s a bit tricky, as the wall is gyprock. The holes are small, but I am assuming there will be filling and painting involved. Thanks

I was installing a TV bracket when one of my power circuits started tripping. When the breaker is reset there's an audible "popping" sound, strongly suggesting a drill bit or screw has caught a cable behind the wall. Breaker is currently isolated and labelled off. What I need: • Diagnose and confirm the fault • Repair the damaged cable to AS/NZS 3000 standards (accessible junction box or rerun as required) • Insulation resistance (megger) test the circuit afterwards to confirm integrity • Issue a Certificate of Compliance for Electrical Work (CCEW) Site details: • Switchboard: modern Clipsal MAX9 with individual RCBOs per circuit — the affected circuit can be fully isolated without disturbing the rest of the house • Strike location: behind a heavy-duty articulating TV bracket. A light switch directly below the bracket suggests the cable is on a vertical run from that switch • I can remove the TV and bracket before you arrive, or leave it for you to drop — happy either way • ⚠️ Important: the wall is finished in a bespoke Monaco Grand Prix poster wallpaper that cannot be easily replaced or matched. Please plan to make the smallest possible access cut, and factor minimal wall disturbance into your approach. I'll handle wallpaper/plaster make-good myself afterwards. What I need from your quote: • Licensed electrician only (please include licence number) • Breakdown: call-out, labour estimate, materials, CCEW • Whether you'd splice in an accessible junction box behind a flush cover, or rerun the cable to the nearest accessible point • Earliest availability — not urgent but want it sorted this week Happy to send through additional photos of the bracket, switchboard, and likely strike location on request.

Super quick job - my tools are in storage Just need one 8-10mm diameter hole drilled through an internal gyprock wall - so I can run a small hose through it (wall approx 75mm wide) Power point availalbe if your drill needs Easy access to house (park in driveway) You'll be in and out within 5-10 minutes