Find professional local plasterers in Sydney Eastern Suburbs

Gyprock to be installed in opening for a door to be installed. Door, handle and hinges already purchased.

I have a 15cm x 15cm approx corner of ceiling that needs to be cut out and re patched with gyprock and then sanded and a coat of paint, to make it tie in again with the rest of the ceiling .

Looking for walls to be plastered prior to painting, walls won’t have mirrors of shelves on them will all be stripped back bare. Brick wall will need bonding agent first, base coat to level the brick, and then a finishing coat. I’m Looking for a level 4/5 finish as I have a lot of lighting in the space.

Small plaster chip/dent on interior wall (see photo). Looking for someone to patch, sand and touch up so it blends in - ONLY REQUIRE PAINT-FOR SMALL PATCH Job should be quick — paint required.

I need my Samsung frame flatscreen hung on the wall today I do not have a bracket

Hi, need a licensed tradesperson (plasterer or passive fire specialist) for a small but compliance-critical ceiling repair in my top-floor (3rd storey) strata unit in Bondi Junction, NSW. Job details: • Patch and fireproof a single 150 mm hole in a double-layer Gyprock fire-rated ceiling. It’s to cover a hole made for range hood ductwork that is going to be removed. • Access via manhole to roof cavity from inside unit (no external roof access needed). • Must restore full fire-resistance level (FRL) per Australian Standards (AS 1530.4/NCC) using tested passive fire system + matching plasterboard reinstatement on underside. • Include photos, product data sheets, and compliance statement for strata AFSS. • No cosmetic finish required (just functional patch); I’ll paint later. Requirements: • Experience with strata fire-rated repairs (double Gyprock ceilings). • Provide tested system detail for this penetration size. • Public liability insurance + relevant certifications. Budget: (open to quotes based on method). Please reply with your experience, proposed approach, and fixed price quote.

Plasterboard wall repair after TV mount removal – professional finish required. I have a wall with multiple old TV mount holes, metal anchors, and a cable chase opening. I need: • All metal anchors removed • Damaged plasterboard cut back cleanly • New plasterboard patches installed with backing • Joints taped, skim coated, sanded flat • Entire wall repainted to match existing finish This is not a filler-only job — it must be done properly so the wall is perfectly flat and invisible after painting. I also want all cables hidden behind the wall Please quote including materials and paint.

There are three holes in walls that need to be repaired (plastered / painted with colour match). Two holes are in the same wall (see photo, with cardboard covering the larger hole). There is a third hole (not in photo) of the same size as the smaller pictured hole in another wall. The larger hole was caused by the removal of an old gas heater and the two smaller holes were caused by the removal of intercoms. I would like the repairs to blend into the wall - ie smooth detail and colour match.

We are looking to hang a round mirror onto a plasterboard wall. The mirror is not glass, but it has a metal frame so is heavier than something you might get at Ikea etc. Looking for someone who can hang it properly, using the appropriate fixings, not make a mess, etc. And takes pride in their work.

Need to remove Gyprock part and make some more space.( its possible, checked back side). Need more room for bigger fridge.

We had an oyster light removed and replaced with a ceiling fan, leaving behind a small hole that needs patching. I'm happy to paint it afterwards, just need the plastering done.

Need to frame & repatch hole left from replacement ducted aircon unit (I don't need it painting, I can do that, if you want to quote to paint then add separately in comments). Original hole was approx 1300mm x 1300mm, this has been partially patched so: Residual hole is approx 1300mm x 750mm

Install plasterboard to ceiling cutout Height low 2.4 Area to fix about 2 m2 Street parking ok

I need a handyman to fill in/plaster over six holes drilled into the wall of my rental — I have just removed the TV bracket that was on the wall. Photos attached.

Have recently repaired a roof leak and now need one sheet of gyprock replaced. The opening itself is about 600x400mm but would prefer a 2400x1200mm replacement.

Instructions: 1) patch hole on ceiling with gyprock 2) cut out section of return air box to allow air flow into the unit 3) cut in and install 45x45 man hole into patched section to allow for access to the unit in future if required

Hi. I need a handyman to fix a small hole (maybe 7-10cm big) in gyprock. Can you please give me a quote? Ideally, I’d like this done tomorrow but I am flexible (this weekend is good too). Thanks! I also need someone able to light sand and paint.

The kitchen wall needs to be Patched / Plastered where the old Rangehood used to be.

Looking for an experienced plasterer to replaster a hallway in a Paddington terrace. The hallway is approx. 5 metres long and 1.5 metres high, with some patching required to blend into the existing walls for a seamless finish. Scope of work: • Strip back any loose or damaged plaster • Replaster hallway walls (approx. 5m x 1.5m area) • Match texture/finish with existing plaster for a consistent look • Prep work and clean up included Requirements: • Must have experience with heritage/terrace homes • Able to blend new plaster with existing without visible joins • Supply own tools and materials (can discuss if some materials need to be provided) • Clean and tidy work Location: Paddington, NSW Timing: ASAP Budget: Open to quotes

Need signage on the lift glass, Door and gyprock wall going upstairs And on a glass top of door