164 Plasterers in Brisbane

The holes are for pictures to be hung up, the walls have brick & mortor behind it. All necessary items for the job have already been purchased, however dont have a drill for this.

We are moving out of our 2 bed apartment and need some small plaster jobs/touch ups done on a few walls

I have a cornice that needs to be put up above cabinet. Would love it to be painted too. Thank you

4 x 100mm x 100mm plasterboard patches 10 x nail / screw hole patches 4 minor exi corner plasterboard patches Patch and fill door jamb (chewed by dog) Patch 2 x door at the bottom (chewed by dog) - Must provide all material for patching and Paint to match walls/door jambs - MUST BE EXPERIENCED

PLASTERER AND PAINTER NEEDED on Saturday 30.01.2021 1 x patch and paint (colour match) = 20cm x 20cm 1 x patch and paint (colour match) = 25cm x 15cm 1 x fill and paint (colour match) = 5.5cm x 5.5cm

Apply two top Coates plaster to this walk in Please supply plaster

Need screw holes patched and painted. 11 in total. Paint will be supplied

2 small areas (little holes in wall) and one ca 1m tall area after water damage through pipe

Hi, There are a couple of spots (see pictures) where the cornice is coming away slightly. Just looking for a professional neat clean job to fix it up.

square piece of ceiling approx 1200 x 800 needs to be sheeted to match existing plaster with a touch up on edge, refer to image

There was a hole in the ceiling due to a water tank leak. It has been partially fixed but requires further sanding and another layer of plaster. The area is approximately 12m2.

2 x holes need to be filled in wall where power points have been removed. See image

Several scratches/gouges and damage to paint on white plaster walls. Will need to be colour matched, filled and painted over.

Need to get a small hole / dent patched, sanded and ready for painting. Damage is about 10-15cm long. See photo.

Punched hole in the door has left it broken in

I need a builder or plasterer to build a firewall on the back of a granny flat, as required by Council . Action plan done by firewall certifier is available to show what is required. Flexible with time to be done but asap would be good. Unsure of cost but happy to get reasonable quotes

We have ceilings installed but there is not a strong enough section to support a ceiling fan. So in order for it to work we need to cut out a 500 x 500 aprox in the centre of the ceiling and hang a supporting timber to be able to fix the ceiling fan to. Hope the above makes sense! It’s currently hanging ceiling from CSR. In brief - cut out (4) squares from plaster board. Install hanging timber to support ceiling fan and then reinstall plasterboard and plaster ready for painting and ceiling fan install!! Ask any questions

Small holes and some plastering Some paintwork to cover patches

We have some pictures that we’ve moved and would like to get the hooks taken out, plastered and paint matched. ALSO, we have 5 (a2-ish sized) framed prints to be securely hung Please see the attached photos for the anchor hook things in the wall

We have five down lights which flicker or don't work and some plastering issues around them. Could you please fix any issues with the down light wiring and replaster around the lights where required?