Find an experienced fence painter in NSW

I require an experienced painter who can paint my recently updated wrought iron palisade gate (1.7x0.9m) and galvanised iron fence (2x1m) as I don’t have the time to do it. I will provide both fast-drying White Knight Primer and Topcoat paint and also small brushes. There’s a thin layer of recently formed rust on part of the gate that’ll need to be removed by light sanding/wirebrushing prior to painting.

Prep and paint front fence white. Includes light sanding, wipe down, and two coats on the main fence and the small section other side of the driveway. Paint supplied. Fence approx. 20 metres

Looking for an experienced painter/spray painter to prepare and spray paint approximately 70 linear metres of 1.8m-high Colorbond fencing (one side only). The fencing consists of: * Older grey Colorbond fencing which is weathered/faded and has some inconsistent colouring. * Newer maroon Colorbond only on one side of house. It is in good condition but will require appropriate cleaning and preparation/de-glossing to ensure good adhesion. Scope to include: * Cleaning/preparation of all fencing; * Light sanding/scuffing/de-glossing of maroon fence * Priming of exposed, deteriorated or other areas requiring primer; * Proper masking/protection of surrounding surfaces, including grass, paving, walls and Especially neighbours property; * Airless spray application of two coats; and * General clean-up on completion. I will supply the main exterior paint/topcoat, likely Dulux Weathershield Low Sheen in Monument (or similar). Ideally, the painter will supply their own airless spray equipment, masking materials, consumables and any small quantity of suitable metal primer required. This is currently an expression of interest / seeking quotes, so please provide your proposed price and briefly outline your experience with spray painting Colorbond/metal fencing and what preparation you would propose.

Brand new timber fence painted oneside only Lapped and capped 20 m long Woodgrey colour

Need fence painted. 30m long Height: 2m Two coats needed: 2hr drying time. We will supply paint you supply brushes. Paint is water based.

Hi there Looking for someone who can spray paint the inside of fence along 2 sides of the house using the paint spray gun and paint bought from Bunnings

Need my back fence painted Black paint will be supplied Easier done with a spray gun Half a day job

Colorbond Fence Painting – Labour Quote I’m looking for an experienced painter to provide a labour-only quote to paint the existing Colorbond boundary fences around the house. Fence areas: Dwelling both side fences – approximately 40 metres each Rear fence – 13.5 metres Total length – approximately 93.5 metres The fences are older Colorbond fences shared with neighbours and currently have three different colours. Please provide quote for one side of the fence to be painted in one uniform colour. Important: Paint will be supplied by me. Materials for masking/protection as required will be supplied by me. Quote required for labour only. Please include surface preparation, cleaning, painting and clean-up. Looking for an experienced painter with Colorbond/metal fence painting experience. Please provide your labour-only quote for the complete job.

Paint metal primer and top coats on colourbond fence

Paint 3 x fence panels (as shown) with yellow paint (same as the other)

Hi, I’m looking to spray the inside of my back yard fence it’s approx 40m in total length and about 2m tall.

Looking for a painter to repaint right side of the side fence (highlighted). The colour has faded over time, and I’d like it to match the other side as closely as possible. please include everything in your offer including material. I suggest it is around 20-25m length.

Paint over colour bond fence. 15 x 1.8 m. labour only. We can supply paint.

Back fence requires painting. Approx 60sqm. Pictures of area attached. Colour: monument

Spray Paint Fibro Fence You must bring paint and all equipment Fence requires to be pressure cleaned and 3 coats Colour = Snowy Mountains To be completed Saturday 20th of June Fence is : 1.6m high x approx 20 meters Location: east Ballina Photo example is of fence - tree’s pictured are being removed today

Need fence painted in monument 29 panels in total See photos Please provide quote for material and labour

Need front metal gate painted

Paint new fence to match surrounding colour

I need my fence painted (in black), it is 14 panels so around 34 metres. You will see in the photos there is a garden but happy for you to paint as low as you can and I will just add some bark myself later on so you don’t need to move anything just go as low as you can. Primer or whatever it’s called to help it stick would be great and two coats is needed at least please as I want to stay in budget best I can also you will need to provide paint, any questions just ask thanks in advance

Paint fence wall size is approx 25 m by 18 m. Off white paint