Find a professional lattice installation service in SA

I have a color bond fence that I would like to cover up and painted with a wooden lattice crisscross fence.

I basically need a section of lattice reattach to fence at moment being held by tie straps The length is probably around 1.8 meters long

Install a panel as per photo using the existing post on the right and using the fence rail( inside of fence) and dynabolt to driveway floor using bracket to install another post to the left . Then fixing panel aligned with other panels to the right. It will be easier when you see the job. Ladder provided if needed. Please work quietly as is my elderly mum's house and do not be bothered by nosy and unfriendly tenants renting next door. Just focus on the job and u can not go on their property. You might want a quick look first and if different screws or bracket is needed I can purchase ready for installing. The panel is quite long so when fixing you can temp use a screw to hang one side to make it easier when securing the other side . You can work it out, an old man attached the three panels to the right on his own in a few hours. Just to be clear the panel is to be installed inside the black gate to the left towards the inside gate.

Install one plastic lattice panel over fence using two steel posts and brackets to dynabolt into the concrete. Install from the black gate going back, similar to the ones pictured in the photos. You will not be able to access neighbours property, but you could use the top railing through the fence to drill screws in to hold the posts. And the bracket will hold the bottom, then small metal screws to secure the panel onto the posts. You must be able to do the job without Mme there, you might want to have a look before doing the job. All materials provided. Work quietly when doing the job as it's my mum's house who is elderly. Do not be bothered by unfriendly neighbours, just focus on the job. Job is in Pennington area.

I require a trellis fence to be built for climbing plants in front of an existing Colourbond fence. It needs to be stand alone with wooden frame with a wire trellis. Approx 12m long and 2.2m high. Support posts to be supported by metal supports cemented into ground. Photo of area and example of what I am looking for attached. I can supply the materials but will also consider both labour and supply - Due date: Flexible

Part of a panel of lattice has Become dettaced - Due date: Flexible

install three posts and attach two lattice panels 2.4m X 1.5m to the posts. posts are to be mounted to concrete so will need support brackets to dynabolt them in to the ground. all materials to be supplied.

Paint (or spray paint) the lattice pictured - approx 10 metres - one side only as will eventually be taken down due to hedge growing. Colour: Monument please Paint and brushes not supplied. - Due date: Needs to be done on Tuesday, 10 October 2023

Replacing current timber lattice with Matrix plastic lattice in patio area and side gate. - Due date: Flexible

about 20sq m of wooden lattice spray painted - Due date: Needs to be done on Tuesday, 1 August 2023

Some balcony repair for wood rot and lattice leaning over away from shed - Due date: Flexible

I need someone to cut a metal lattice work from around a rain water tank and remove the metal and posts. There are 5 rain water tanks this needs to be done for. - Due date: Flexible

Install new lattice panels on top of fence approx 8 m long - Due date: Flexible

construct an orchid house 1.5 W x 1.2 D using lattice or shade cloth - Due date: Flexible

Install lattice on top of existing post and rail fence approx 23m long. The lattice will be sourced from Bunnings: https://www.bunnings.com.au/matrix-2400-x-600mm-slate-grey-diamond-fence-extension-lattice_p0029261 - Due date: Before Saturday, 31 December 2022

Paint 15 garden lattice panels and posts Plus 12 sleeps 2 coats on everything Paint supplied - Due date: Flexible

Looking for plastic lattice to be attached to the top of my fence - Due date: Before Saturday, 23 July 2022

Install six panels lattice (kit from Bunnings) to existing colourbond fence. Four (each panel 2.4 m) panels on one side of fence from lemon tree pictured, then two panels on other side fence pictured (bowing panels will need to be removed or I can do it). First three photos are of the two panels (green) that have bowed almost falling down), and the new grey panels on ground waiting to be installed each panel 2.4m long). Second three photos are the other fence with new grey panels on ground each ones 2.4m long. This is the product https://www.bunnings.com.au/matrix-2410-x-600mm-slate-grey-privacy-fence-extension-kit_p0172427 - Due date: Flexible

Install new lattice panels on colourbond fence . I will purchase and paint the new panels but I need them installed and old warped ones removed. Two panels. Better photos to come… - Due date: Flexible

To help grow an existing creeper, I need someone to measure, purchase, paint & attach some lattice to the upper area of an outdoor brick wall. Referring to the attached pic, the area in question is the bricked space above the creeper. The paint color will be the same as the wall & I will supply this. - Due date: Flexible