Find a professional lattice installation service in Brisbane

I would like a rectangle of plastic lattice attached to the ceiling on the balcony, with the intent of having a ceiling fan installed 7/12. Also, move a glass shelf in the shower from one end to the other. - Due date: Before Tuesday, 5 December 2023

1. Install a lattice screen on front verandah (approx. 201cm x 90cm). Will need to be pre-painted. 2. Install vertical battens on two sides of rear verandah, replacing existing battens. Two areas, each approx. 180cm W x 290cm H). Will need anchoring to concrete floor. Tradie to source and supply materials. - Due date: Flexible

Some screws that are holding a wooden lattice above our garage door have come loose. Please see photos for more information. We would like the metal angle brackets and screws replaced and repositioned (the wood appears to be weakened in the current spot). - Due date: Flexible

Looking for 4 People to come and paint the lattice around the base of our house this Wednesday. There are 13 Panels of Lattice that need to be painted with 2 coats each We estimate this to be a full day worth of work for each person We will supply the paint and brushes etc We will be home working on other parts of the house so will be there to ask questions / supervise This is the perfect job for 4 friends who might be at uni or wanting to earn extra money to roll up their sleeves! It doesn't require professional painters but people who are proactive, hard working and have a professional attitude (aka not just going to slop paint aorund) See photos for what we mean by lattice panels We have budgeted this job at $300 each for the job which we believe will take at least one day (approx 8 hours per person) so total $1200 between 4 people. If you want to do it but dont know others or only know one other who would join please apply as we are happy to have people who don't know each other. - Due date: Needs to be done on Wednesday, 10 May 2023

Build a lattice screen with frame, to fill one end of a verandah. Basic carpentry skills, drop saw etc...approx. 3m x 3.5m. Easy access & work area, no ladders, finlayson timber supplies down the road. Measure,cut, frame & mount. Poll one side & house the other, wood mount screws. $750 LABOR not including parts. - Due date: Flexible

We want lattice and shade cloth installed above our fence. 5x1.2m and another section 1.2x1.2m. Dark green shade cloth on both sides. Also want new / matching shade cloth attached both sides of an existing section 2.5x1.2. New farm location. You buy / provide materials and labour, want don’t today / Tuesday preferably. $800 total job probably needs 3 of these from Bunnings $50 per panel - https://www.bunnings.com.au/lattice-makers-2400-x-1200mm-treated-pine-lattice_p0362692 - Due date: Flexible

I need help unscrewing the privacy wood lattices from the patio. I am not strong enough. Will need a powerful electric drill with high torque. These have been screwed in for 30 years and I cannot undo them. It’s about 20 screws. If you have the tools it will take about 20 mins. - Due date: Flexible

3 lattice privacy screens for a Queenslander upper deck area - Due date: Before Friday, 2 December 2022

Hello Air Taskers I am needing the wooden slats (brown) in the photo removed, disposed of and replaced with lattice to freshen it up as the old wood is quite rotten. The wooden slats act has a privacy screen. We are not in BNE , so I can either order lattice from Bunnings and have you collect or you can send through invoice of materials for us to fix up + labour. No need to paint it as we have professional painters coming in a few weeks. So in a nutshell 1- Take down old wooden slats 2- Dispose of 3-Replace with new lattice from bunnings. Please reach out with any questions. Cheers - Due date: Before Wednesday, 2 November 2022

Carefully remove a lattice privacy screen and a slat privacy screen - Due date: Before Friday, 16 September 2022

We require the small end section to be made into a gate. I have added a photo wher the current gate is and we want one on the other side of the carport as well. We also require lattice to be put up to section off one side of a car port to the house to be enclosed. - Due date: Before Sunday, 29 May 2022

His there we have just had lattice and new veranda doors fitted to our Queenslander and we would love it spray painted. Probably some touching up work around house too if you have time. Experienced painters only (you'll need a spray gun). - Due date: Flexible

We want 4 lattice attached above fence and shade cloth for privacy screening. Look at photo of ones we did previously, want the same style, we bought the materials from Bunnings. Contractor to get materials also, will pay $550 for labour and cost of materials on top

Hi I have a few rotting boards on the deck that need replacing. Also.some lattice that needs removing.

Repainting of front stairs and verandah lattice screens. These are already painted so just need a freshen up. Painting new cricket stump balustrade - currently only primed so will need two coats I can supply the paint, or, alternatively, if you can source wholesale/trade discount paint I am happy to pay for it through your supplier.

Supply and install Lattice back patio Between timber fence and patio roof - Due date: Flexible

I have a door with micro lattice. The panel needs to be replaced . The size of panel that is damaged is 36 cm x 105 cm. I am located in Clayfield.

Hi I am looking for someone to create lattice similar to the one in the photo. It will probably be 4 frames.

I’m hoping someone can come and measure our Queenslander verandah, procure micro lattice to match our batwing doors and install it :) - Due date: Flexible

We have a small Queenslander and want to install lattice on the front verandah. 3 panels are required. - Due date: Flexible