Find a professional gyprocker contractor in Parramatta

Cut the damaged gyprock Install gyprock on damaged sections Paste it up Blend the colour, paint plain

I have 2 holes in wall that need patching and paint. One hole is 4cm long and the other 17cm long. One hole is high up a wall and would need a ladder. Both holes are above a staircase. I have the paint.

Only professional Gyprocker by trade make offer, not handyman. I have attached some of the photos. 4 ceiling round aircon outlets holes-need to be closed off as I have moved it to wall outlets. Need to also do small bulkhead for air con outlet as per photo and also to cover a post. Some sections need setting and sanding done properly for example the pelments and underneath the balcony. Also sanding The arch needs to be set properly. Some minor other settings, two to two half day job.

Need all brown panels replaced with gyprock

Hi I have built a new house. The painter did the first coat and said some sections of the Gyprock needs touch up (needs done properly) The ceiling aircon outlets need to be closed off as I have moved it to wall outlets. Need to also do small bulkhead for air con outlet as per photo Some sections need setting done properly for example the pelments and underneath the balcony. Also sanding Need professional person with proper tools to do the job I will pay for all material. Job is ready to be done

Curtain rod holding heavy lined curtain and a sheer curtain. One of the five brackets has come loose from the gyprock wall and needs securing

Build bulkheads around pipe in bathroom I’ll sheet up and supply materials steel tracks Approx 200x120 2.4m high

Gyprocker needed for bathroom

Remove and replace bathroom ceiling. Approx size 1.8 x 2.8 metres.

Small laundry room place gyprock

Gyprock over small section of wood panelling (see photo) Room is 4 metres wide Air conditioner unit and curtain rail will have been removed by then Repair small hole left from where aircon con went outside

need to gyprock a wall and sand 243 chisholm rd auburn

I've got a toilet and a laundry that's just been built need the walls a roof done the timer all there all carpentry done

Hi I need an electrician to add a back to back double power point on gyprock. Currently there is a power point on the garage wall on gyprock need to add a double power point opposite side thru gyprock. Must provide the double power point and it needs to be a specific brand check my photos of what it needs to be.

The gyprock and attachment to which Bathroom exhaust fan is installed is getting loose and is tilted. We would need to secure it. I can’t take it to give a more clear picture otherwise it will come down as a whole.

1. 800 x 400 hole needs to be patched in ceiling 2. A small hand sized area of bubbled paint adjacent to hole also needs to be repainted Two separate visits may be required for proper job

Hi, I need to do partition for my office walls. 9m partition wall in total 15m gyprock panel closing windows for our studio to make light proof. Walls to be painted 50%. Rest will be acoustic panels attached. 2.6m height ceiling. 50 sqm of acoustic panels to be fitted on walls. Steel rail to be placed on ceiling for lights placement. Parramatta location, in office building level 1. Street parking, paid parking and loading zone available. Not a busy street.

Ceiling gyprock replacement / repair works. There are total of 4 areas that require replacement which includes replacing damaged 90mm cornices as well. Living room 1. Replacement of ceiling, approx 10sqm 2. 90mm cornice, approx 12lm Bathroom 1. Sand and patch 2. Paint Kitchen & laundry 1. Replace cornice, approx 3lm 2. Patch and sand 3. Paint Common area 1. A frame ladder and planks (no scaffolding needed) 2. Replace cracked ceiling+ cornice where applicable. 3. Paint Note: Floor protection on all areas is a must and clean the site after completion.

Hi please gyprock and plaster prep ready to paint. You'll need to bring plaster sheet. About 2 m x 1m

Looking for an experienced handyman or insulation installer to replace damaged ceiling gyprock and install foil insulation under the roof (as per attached photo). Scope of work: • Remove damaged ceiling gyprock • Supply and install new gyprock/plasterboard • Tape, set, and sand joints (ready for paint) • Install foil board / sarking insulation under roof rafters (like existing in photo) • Secure insulation neatly between timber framing • Re-inforce the rest of ceiling and set finish. Clean up and dispose of waste