Find an experienced fireplace installation professional in Adelaide

I have a new 42 inch smart tv and wall mount that needs to be installed above my fireplace. The wall is solid brick-so a drill with a masonry drill bit is required. Will need you to hook up and tune the smart TV (have purchased a tv antenna cable) so it’s all set and ready to watch.

We have a fireplace screen that needs a bit of tlc. The main screen needs to be welded back on the frame, and the whole thing needs a scrub (to remove rust and re-spray paint).

Install a fire place flue and remove existing flue

Install wood fireplaces, inbuilt and freestanding

Remove the old flue and install a new flue in its place. Install flashings etc to make it water tight.

Paint the wooden surround to my fireplace in white

Existing fireplace - needs re-installation (we removed it to renovate the room. It is stand-alone, no electrical and we have a tin roof.

We have an electric wall mounted fireplace with 18.4cm depth and require a mantle to be built around it for better presentation. Would like the fireplace to sit flush with the front of the mantle. Example in picture.

Install new built-in gas log fireplace into a built alcove/cupboard. Will also need to run gas line from one side of house to heater location approx 13m under the house. have flue kit, colourbond roof.

Tiling under combustion fire, directly on to existing tiled floor. Area is 1.2m x 1m. Tiles and grout already purchased. Will need adhesive and trim. One tile will need to be cut in half. I will remove the fire place before tiles are laid.

We have a secind hand wood fire heater, and new flue kit. The fire is freestanding, with easy accessibility around the whole unit.

Install wood fireplace inside flue though a normal high roof

Tile kitchen splash back (approx 5sqm) see picture example of tiles (white square 100x100) and 4 floor level fire places (approx 320H x 1400W)(heritage tiles 200x200). Only tiles supplied.

Ideas and suggestion please

A small Nectre fireplace to be couriered from Mount Barker to Magill. Specs are in the images. - approx 85 kgs

Make a base/stand or electric fireplace, fit it in, and finish of gyprocking, flushing. Refer to pic. Kindly quote

We 're looking to build in the space above the right hand side of our fireplace with storage and two doors. The existing space is 1160mm high x 850mm wide. The full depth is 1200mm but it would be good to put a back on the cupboard. We were thinking of using existing 40cm x 100cm IKEA doors but open to other options. - Due date: Flexible

Built in wardrobes on either side of fire place: approx dimensions of 1m wide by approx 2.8m tall - Due date: Flexible

Removing an existing old style fire place that has gas connection to convert it with new style. The new style fire place will be or can be gas or electric. The job does not involve making or designing anything, it simply involve the removal of old fire place and patch the wall, leaving the gas connection to install new one. - Due date: Flexible

swap a flu for a fireplace. take the old flu out and replace with a new flu. Someone with experience please. - Due date: Flexible