Find professional window and door services in Pymble

Fix concertina door in passageway between kitchen and hallway. Job was previously posted earlier in the week but under another account but cannot access the account for some reason. Apologies to those that may have already responded. Please submit again. Thanks

An internal door is needed to be shortened as it is stuck at the bottom with the floor.

1) Install a window awning on brick wall. Will need to drill 14mm and 10mm holes on the wall. 2) shorten an inside door, see attached picture 3) hung 4 pictures

Need two sliding doors/frames repaired. The damage is limited to the bottom of the doors and frames/sills. The extent of the damage can be seen in the images.

The top frame above the built-in wardrobe fell off. A small job to attach it back up with super glue and nails. Make sure the door is still sliding after it gets re-attached

Sliding door to my laundry needs to be put back in

Needs to drill holes to be able to screw the signage to an outside wall

replacement of Window Head Board - 3.3metres

Glass sliding door won’t close properly and black strip has come out of inside of door

Front & rear plywood door skins have come loose so the door wobbles and is unable to be closed. It appears that these plywood sheets could be glued back in place and clamped, however, it may be more cost effective to replace the door. Carpenter required. Please advise /quote.

door handle replace 3/4, replace lighting fitting3/4, time during 24/12--4th Jan

Install a Kwikset Powerbolt 250 10-Button Keypad Electronic Deadbolt Door Lock and remove existing one of the same. It’s just a swap of taking the existing one out and putting the new one in. One of our garage doors is not opening (remote is starting the motor, the door seems not to be connected properly to the lift it up). Both are straightforward tasks, shouldn’t take more than 1.5 hours MAX

Removing the Sticky residue with part of the plastic film stuck onto the front glass panel of a digital lock, last owner never removed it and it’s been exposed to the elements and now I can’t get it off

The garage door can’t close properly. It closes very slowly as well.

We have an outdoor umbrella that needs the base screwed off and the new base screwed back on. May need electric tools to remove the bolts

Bottom of left door is rubbing against carpet- difficult to open/close for 45 degrees of door opening. Door needs to be adjusted so it opens and closes smoothly.

Install 8 acoustic doors, 1 hollow sliding door and 1 solid door 1. Remove old door and the hinge from the door 2. Install new door and make whole on the new door to put hinge and install hinge on the door. 3. Paint - base and top coat Added images of the new door and the existing door to be replaced

Interior door to garage is not closing easily - seems to have shifted so it catches on door frame. Needs hinges checking and possibly a bit sanded / planed off of door.

Replace garage door spring

2 existing doors to be rehung to open into the room in the same direction but hinges on the other side.