Find an experienced handyman in Ballarat

I need a damaged section of my hallway wall repaired. There are raised/buckled areas and the surface is uneven. I need the damaged area patched, smoothed and sanded so it is ready to be painted. I will do the painting myself. Would like a quote I’m unsure on costs

Looking for an experienced and reliable handyman to complete the following maintenance items at a residential property: 1. Kitchen tap leaking – Inspect and repair the leak. May require replacing washers, seals, cartridges or other minor components if needed. 2. Loose skirting board in hallway – Secure and reattach the loose section neatly. Minor filling/touch-up if required. 3. Main bathroom door jamming – Inspect and adjust the door so it opens and closes smoothly without jamming. May require adjusting hinges, door alignment or latch. Requirements: - Experience with general home maintenance and minor plumbing repairs. - Please bring your own tools and standard materials required for the repairs. - Complete the work neatly and professionally. - Please advise if any parts/materials are required before purchasing them.

I’ve purchased a shower screen however the room isn’t square so we worked with what we had. All the base and new tiles have been professionally installed. I need to either work with what we have (or use as much as possible, or we just cut our losses and start again. Looking for someone to come to the property, check out what I have bought (or just use the photos as a guide) and get the job done anyways possible. Check the photos for sizes etc. we are about 50mm to big off the small side glass.

Assemble a small home gym. Main thing will be a squat rack, will need own tools.

Need to build a garden shed 2.75 by 3.75

# Bathrooms Exhaust & Ductwork Looking for an experienced **commercial mechanical/ductwork contractor** to complete exhaust and ductwork installation in warehouse Delacombe, Ballarat**. Scope includes: * Bathroom/amenities exhaust * Lunchroom exhaust * Exhaust fans & ductwork * Grilles, dampers & roof cowls * Roof penetrations/sealing * Supports & installation * Testing and commissioning **Engineering drawings provided.** Please quote **labour + materials** and include your availability. Must have relevant experience/licensing for commercial mechanical ventilation.

I want to put curtains on my living room but need to install a curtain rod to the wall

Black colour bond shed to be assembled in the back yard. Bought new in box. 3.2 by 3.2 m CONCRETE FLOOR NOT DONE BUT WILL NEED THIS DONE! SSEMBLY INFORMATION Flat-pack delivery in 4 boxes Professional assembly recommended (6-8 hour project) Tools needed: Drill, spanner set, level, measuring tape Assembly time: 8-12 hours with 2-3 people recommended Foundation: Level concrete pad or paving required for stability and anchor appropriately. 📦 WHAT'S INCLUDED Premium black garden shed (all panels & commercial-grade frame) Heavy-duty sliding door system with security locks 4 ventilation shutters for optimal airflow

https://www.vevor.com.au/dog-doors-gates-ramps-c_12439/vevor-pet-door-for-wall-with-lock-and-3-magnetic-flap-system-metal-frame-large-p_010593774193. Frame Size is 362 × 536mm interior wall is drywall I think and exterior is weatherboard. In one of the walls sections in below photos.

Install frameless shower screen panel 900mm with clips

General maintenance around property

I am looking for an experienced and careful picture hanger to install 14 artworks and one wall clock in my home in Ballarat East. Preferred date and time: Monday, 17 August 2026, starting at approximately 1:00 pm. All artworks weigh less than 10 kg each, and most walls are plasterboard/drywall. I will provide correctly weight-rated 3M CLAW Drywall Picture Hangers. Please use them where suitable. The wall clock may require a different fixing, so please bring suitable basic backup fixings and discuss any alternatives with me before installation. Two artworks will be hung above an upright piano. Extra care must be taken to protect it. Please do not stand on the piano or place or lean tools against it. The piano can be moved slightly if required but must be handled carefully. The task includes: Hanging 14 artworks and one wall clock Measuring and confirming the height and position Centring each item accurately Using a laser level to ensure correct alignment Ensuring all items are straight, level and secure Providing minor advice on spacing where required Bringing all necessary tools, including a laser level, measuring tape, stud finder and suitable ladder All items and their intended locations will be ready before arrival. I would like all 15 items completed carefully during one visit. Please only make an offer if you have picture-hanging experience, good attention to detail and positive reviews for similar work. Please confirm that you are available on Monday, 17 August 2026, at approximately 1:00 pm and that you will bring and use a laser level.

Hinges and screws are rusted in the meter box. I already had a new piece of timber cut to replace the door but I can't remove the old one!

2x holes in walls to be patched and painted, side of couch to be fixed back on & fire alarm to be hung back on roof

Looking for someone to install a replacement kitchen cupboard door. The cupboard uses concealed (Euro-style) hinges. The new door doesn’t have the hinge holes, so it will need the circular hinge cups drilled out accurately before the hinges can be fitted and the door installed. I already have: Replacement cupboard door Hinges You’ll just need the correct tools (35mm hinge boring/Forstner bit) and experience fitting kitchen cabinet doors. Located in Black Hill, Ballarat. Please provide your availability and quote

I’ve purchased a medium sized dog door. I want it installed into a hollow wooden laundry door.

I need an installer to help install a freestanding wood heater/fireplace. The flue (up to 4m high) will pass through the ceiling out the roof. I have a study A-Frame industrial ladder that is 3.8m high if needed.

To assemble a garden shed on a concrete slab. see attached photo.

I have high ceilings and I can’t reach the fan to change the direction for winter.

I need a set of 'barn door' sliding doors fixed so they slide on the bottom guide correctly and stay closed when closed and align together. This possibly requires some corrective routing along the bottom of the doors (as its a little wonky) to make them run straight and runner guides re-installed on the floor (as they are floating at the moment and will not stay closed). So I am looking for someone with strong carpentry skills as there are a number of smaller carpentry related (and other 'fix-it' jobs that are required. Will provide any materials. Need someone who is located locally as there are potentially further jobs.