Book a professional blind repair service in Melbourne Western Suburbs

The roller blind’s operating chain broke and became stuck inside the mechanism. I unscrewed and opened the clutch mechanism to remove the jam and reconnect the chain. However, when I tried to put it back together and tighten it, the part that holds the mechanism in place kept moving and would not secure properly. I need someone to inspect and repair the roller blind clutch mechanism or replace it if necessary.The last two blinds also needs to be fixed

Our outdoor Ziptrak blinds have stopped working, we have tried all the troubleshooting steps with the remote to no luck. We believe the motors on the blinds may be dead

Need window blinds supplied and installed on all windows of the house. Window dimensions Bedroom 1 Window (w*h) 235 * 175 Bedroom 2 180 * 175 Bedroom 3 Same as bedroom 2 Lounge 2 windows 220 * 175

Hi, I'm looking for a handyman to tidy up 6 roller blinds at my house in Rockbank. The blinds still work fine, but the fabric has come loose from the bottom tubes in some areas, and a few end caps are missing. It's mainly an aesthetic issue, so I'd just like the fabric reattached neatly and the missing caps fixed if possible. No need to replace the blinds - just looking for a simple, cost effective fix. I've attached photos. Please let me know your price for all 6 blinds, including any materials needed. Thanks!

Window blind won’t go up despite of using a remote Blind is stuck down

I need to out the electric curtain to cover my alfresco. 2 sides.

Metal beaded chain has come off the round mechanism of roller blind

Looking for someone experienced in roller blind repairs. A handyman recently replaced the spring/mechanism in this blind, but he told me he did not have the correct size and fitted a different one. The blind has now failed again after about a week. I need someone to inspect it, identify the correct spring/roller mechanism for this blind, and repair it properly. The blind is fitted under a pelmet. Please only offer if you have specific experience repairing spring-loaded roller blinds and can supply/source the correct-sized replacement mechanism if required. $60 + cost of parts.

Need help to restring these blinds (string has snapped so they don’t open or close) and help cleaning them (I have a hose to wash them down) before rehanging.

I need an experienced blind installer to fit a single roller blind that's already purchased. The tricky part is access, not the blind. Install one chain-driven roller blind, recess fit, into a stairwell window reveal Window opening is approx. 1810mm wide × 1800mm high Blind is a Buxton roller blind in Pewter, with brackets and chain supplied Fit a chain tensioning device to the wall (child-safety compliant) Make sure the blind tracks straight and runs cleanly before you're done The window sits over the winder steps of a two-storey staircase. There's no landing underneath it, only wedge-shaped treads The window head is roughly 2.3–2.6m above the treads You'll need to bring your own stair-safe platform or multi-position ladder. Carpeted treads A second person can be on hand to assist if useful What I need from you Experience installing blinds in stairwells or over stairs Your own tools, drill and access equipment A fixed price for the job and your availability (weekday afternoon or weekends preferred) Confirmation you're insured Photos of the stairwell and window are attached. Happy to answer questions before you quote.

Have already pitched the drop down blockout blinds Just need to fix them into the masonary blocks

I am renting and am looking for a blind to be installed within the window frame for sun and heat blocking. The window already has shutters so I need something to go on the inside of the frame. I have taken measurements (below) but they are rough so I would prefer if you came to take measurements. Because I am renting I would like the cheapest option that is not going to do too much damage to the window frame, even something temporary but that is easy to use. I have not purchased anything and am looking for assistance with this. Approx measurements: 8.5 - depth 144.5 - height 177 - width

One blind needs installing. We have the blinds and some materials for the blind. We might be missing the connection part or holder . We need someone to provide what we missing and install the blind in the lounge

Roller blind cord snapped off and needs replacing. Please supply replacement cord (will cover the cost of this).

Repair damaged large roller blind Large indoor roller blind has been damaged at the bottom. Fabric has torn and the bottom rail has come away/bent out of position. The blind is still attached at the top. Looking for someone experienced with roller blinds to assess and repair if possible rather than replace the entire blind. Please advise if any replacement parts/material are required. Photos attached.

I need someone with a long ladder to complete a 5 min job! Roller blind was removed as part of renovation and needs to be re-fitted. Bracket in place… I just can’t reach and my ladder is too small. Needs to happen today (timing flexible). Thanks

Need 4 packed Spotlight dual roller blinds cut down to size and installed. I already have the blinds purchased, so only cutting and installing is required. No need for supply.

blind chain snapped in half

Hello, Looking for someone who can supply & install new roller blind for one window. Window size is 176 x 148 cms. Thank you.

Supply and Install three block out roller blinds. Inside mount. Replace existing partial block out roller blinds. Chain fitted with child proof anchor. Inside window frame dimensions as follows: Window 1: 600W x 1020H Window 2: 600W x 1020H Window 3: 950W x 1820H