Book a professional blind repair service in South East Melbourne

The blind has come off due to an issue with the wall, possibly caused by moisture. I attempted to fix it and drilled the hole but it didnt work as the wall requires reinforcement to hold the blind securely. I require someone to inspect the issue and fix the wall and blind at a reasonable cost.

2x Outdoor blinds for alfresco to block wind, rain and dust. Size is about 3.6mx2.4m high, and second one is about 3.4mx2.4m high.

1. Two double Curtain rod with only blockout curtain - one in Master bedroom window and second in living area/Alfresco. 2. Four day night blinds installation on 2 bedroom windows

We want to install blinds to our window frame however the recess is not deep enough for the brackets and cracked plaster. We need a backing piece of wood installed to attach blinds to.

Heavy wind taken off one side of my alfresco blind from wall

Blind has come off the roller and needs to be put back on

Hi , I have couple of cafe blinds installed to the pergola and I need them to be fixed properly and couple more to be installed . I am looking for quotes to fix the existing ones

I have several Roman Blinds (approx 7) that need to be repaired. 1.8 x 2.2 drop = 4 1.2 x 2.2 drop = 2 2.4 x 2.4 drop = 1 Mainly renew cords & strings.

Install blinds to our balcony area. 2 story home in Clyde North, the blinds are quite large, will most likely be a 2 person job. - Electric outdoor patio blinds - 3500x1000 drop recessed x 2 - 1600x1000 drop x 1 Pictures show our balcony, the size of the blinds compared to a car and our neighbours house which has what we’re wanting.

Looking to have a outdoor blind supplied and installed to a west facing bedroom window to help block the heat entering the bedroom. Price is flexible for the right solution As shown in pictures the window is 1820mm wide and 1550mm tall, obviously the blind will need to be larger then that Ideally the blind would still allow light through, but the priority is to block the heat out, so I understand if light needs to be blocked for best results. Preference is that the blind can be retracted if wanted Happy for you to propose a solution you believe would work best, certainly open to ideas as there are quite a few options available online As seen in pictures it looks as if the previous owner had the same idea as there existing anchors can be found.

Two parts have broken on vertical blinds. Bottom slip part (127 labelled on it) and the top clip (clear plastic part thats part of carrier, circled in blue). Expecting a new carrier and bottom weight. Its right in the middle of the blinds.

The blind has come off the bracket doesn’t seem to roll up

Vertical blind is broken. Need to be fixed pictures attached.

Roller blind to be installed at windows of home

We have 4x roller blinds that need some fixing. 2x roller blinds need the blind re-attached AND need to be fixed so that the blind can be partially lowered. Right now, when the blind is partially lowered, it doesn’t hold and fully unwinds causing the blind to detach from the roller. 1x Roller blind is starting unwind fully. Soon, it will degrade and fully unwinds causing the same issue with the above 2 blinds. 1x Chain appears to be rusted and requires changing. The chain also doesn’t wind smoothly and we want that fixed with a new chain and smooth operation. Thank you.

I need two roller blinds installed Please see photos

Manual roller blind is stuck at half way point so can no longer roll down roller blind

Easy handyman job 3 roller blinds installation brought from bunnings An internal door hinge need to be adjusted a bit, the door can not close due to the new paint.

I need string of indoor blind to be fixed. There are 2, the upper one needs to be done.

Install Large Blockout Roller Blind – Face Mount (Outside Fit) Description: I need an experienced installer to fit a large blockout roller blind to the wall above my window. The blind has been delivered directly from Shadey and still in the box– here’s the product link for reference: https://shadey.com.au/blackout-roller-blinds-jane-cross/ Blind details: Type: Blockout roller blind Mount: Face fit (outside mount) – drill into wall above window frame Width: 2940 mm Height (drop): 1625 mm Roll: Back roll (fabric sits closer to wall) Chain operation (right-hand side) Bracket colour: Black Base rail: Flat, silver No pelmet Large/long blind – may require two people to lift into place Requirements: Bring all tools required for install (drill, level, screws, wall plugs/anchors suitable for wall type) Ensure blind is perfectly level for proper blackout coverage Install securely but in a way that allows for future removal with minimal wall damage Use fixings that are strong but avoid oversized holes where possible Wall material is likely plaster, and the top of the window frame may be solid timber, but this is not confirmed — please be prepared for either Take care to avoid damaging wall, frame, or paint Location: Oakleigh Budget: $200 Photos: Ive uploaded photos of the window and surrounding area so you can see exactly where the blind will be installed. Timing: Flexible – ideally within 1 week