Find a professional gate installation in VIC

Automatic gate installation only Scope of works Weld existing double gate to single gate Pour concrete plinth Install D5 evo smart per operation manual All material supplied

I need an experienced gate installer to supply and install a new automatic sliding gate at my house in Rowville (3178). The job: Sliding gate across the driveway opening, roughly 5 m wide. Please measure on site. Pedestrian door built into the gate. The gate sits in line with my existing grey timber front fence. When it opens, it slides right and parks behind that fence. The fence stays. Its end post will need to be replaced with a steel guide post. Black powdercoated aluminium horizontal slats, about 1.8 m high to match the fence. Motor on the inside at the fence end, with 2 remotes, safety beams and battery backup. Please include in your offer: Gate, posts, track and installation Motor and safety devices Fence end post change Electrical work, or let me know if I need my own electrician Lead time and warranty Photos of similar gates you’ve installed I’ve attached a sketch and photos of the frontage. A site visit to measure is welcome. I’m checking with council before the job starts, so the start date depends on their advice. Location: Rowville VIC 3178 (in person) When: Flexible, ideally within the next 4–8 weeks

Installation of Solar Automatic Gate Opener – Existing Farm Gate Looking for someone experienced in installing solar-powered automatic gate opening systems to install a new Lockmaster solar swing gate opener on our existing farm gate. We have already purchased the equipment, including: * Lockmaster single swing gate opener with 40W solar panel * 2 x wireless keypads * Automatic electric gate lock (24V) * Infrared safety sensors Scope of work: * Install and set up the solar gate opener on our existing farm gate * Mount and connect the solar panel and control unit * Install and configure the wireless keypads, electric lock and safety sensors * Program and test the system to ensure everything operates correctly * Advise if any additional brackets, posts or fittings are required Experience essential: We are looking for someone who has previously installed automatic gate opening systems, ideally Lockmaster or similar solar-powered systems. Please provide details of your relevant experience, availability and a quote for installation. Photos of the existing gate and equipment can be provided.

Looking for an experienced gate installer to supply and install a new automatic gate opening system with remotes, for our existing aluminium gates.

I need a new automatic gate opener installed that is solar

Need it fixed and change motor if needed.

The gate gets stuck part-way when opening or closing. I suspect something is wrong with one of the gears as it doesn’t appear to be an issue with the electronics. I can get it to open/close if I give it a hard push while pressing the remote.

Automatic Gate works great, Need closing gap adjustment. Please refer to photo. Experienced trade person only welcomed to offer.

We require a sliding automatic gate to be installed at our front fence line. There is an existing fence made of tee-tree on the fence line. The height of the gate would need to be at least 1.5m high and 2.5m in length.

Looking for an experienced fencer/gate installer to supply and install fencing and a motorised driveway gate at a residential property in Braybrook VIC (13 McLennan Street). Please see attached marked-up aerial photo showing approximate fence lengths and gate locations with colour coding as follows: • Green = Existing damaged fence to be removed and replaced (~26.9 m) • Red = New fence sections to be installed (~30 m total) • Blue = Existing front fence (~8.3 m) with possible 1 m height extension • Cyan = New automatic motorised driveway gate (~4.1 m opening) • Yellow = Existing side walkway gate to be replaced (~2 m) Scope of works: • Remove and replace existing damaged boundary fence approximately 26.9 metres long • Install new fence sections approximately 30 metres total length around driveway/side areas • Existing front fence approximately 8.3 metres long — preferably extend fence height by approximately 1 metre if practical/cost effective • Replace existing side walkway gate approximately 2 metres wide • Supply and install automatic motorised driveway gate approximately 4.1 metres wide for vehicle access • Gate must include remote control operation and safety sensor to prevent closing onto vehicles/objects Looking for: • Cheapest practical and reliable solution possible • Durable and weather resistant materials • Open to Colorbond, timber, sliding gate, or swing gate options depending on price/value • Open to solar or powered gate motor systems depending on overall cost effectiveness Please provide: • Approximate total cost including materials and labour • Recommended cheapest option • Estimated timeframe • Whether rubbish removal/disposal is included • Previous similar work/photos if available Location: Braybrook VIC

Gate opens but does not stop at the end, possible issue with limit switch. It then goes in a loop and doesn’t stop until button pressed. Only moves one way, not two ways.

Lock for automatic door has got the loosen key .

I bought a new house and have a manual steel gate that opens up to the drive way. I would like to use what’s possible to automate the opening and closing.

A double swing gate for an 4.1 x 1.76 m opening. Foldable gate is better to avoid using height-rising hinge. Need alumnimum alloy gate

1. Install external isolation switch (no external power, need to break out from internal GPO) - yet to buy materials as I wasn't sure if required 2. Install external GPO on fence post - have hardware 3. Replace 3x external lights to down lights with plug base outlet - have hardware 4. Replace sensor light and convert plug base outlet - have hardware

The double swing gate with Aleko opener • One leaf is noticeably faster than the other • The closing part is not done properly and completely closed Unsure if the problem is aging motor, hinges, uneven ground or whatever issues, wanna it be fixed and open & close properly

One side of front gate not returning to closed position. Motor is working but something must be wrong or disconnected with the return mechanism. I have had to disengage the lock/unlock grey lever to open and close that side of the gate.

Front sliding gate currently has an old remote opener that runs extremely slow and often gets stuck. Looking to replace this with a new opener that can handle the double length gate. Installation may require preparation of ground/gate/tracks to ensure it runs smoothly and will last.

Install electric gate to rear of corner block Wooden gates already there

Looking for someone to remove the old automatic gate system and install a new one. Gate controls need full replacement. Please quote for labour and parts. Location: Airport West, VIC 3042. Experienced gate technician required.

Supply and Install Timber Gate on side access of house to backyard

I need to install a timber gate in my backyard, need it done by tomorrow

Quote pleade: Need timber gate painted with weatherproof paint. Gate is roughly 3m x 2m.

I need a simple timber gate built and installed

Timber Gare needs re- aligning / re- fixed to fence / timber pole as out of alignment and different to open/close.

Supply and install a 3.5-metre timber fence with a single access gate, positioned across the middle of the existing concrete. Fence to run from the house side to the existing boundary fence, with the gate integrated into the fence.

We just put up a new fence and I just wanna put a side gate to the house just so I can lock it up. Have a look at the dimensions in the photos. I’m just looking for someone to get the materials and do the labour. I have a Bunnings trade card if that helps. It’s 1.7 -1.8 meters tall same as the fence . With some locking mechanising as well please

I need both of my back gate hinges replaced, ideally with corrosion-resistant hinges (galvanised or steel). The gate is a timber gate on a timber-and-flat-steel frame. Possible minor timber repair if rot is spotted - open to discussions.

I have a brick front fence and need my gate replaced with a simple timber gate 1630 x 855

I have a pair of gates that need new support wheels fitted to keep them square so they will open easily. The large gate needs a new larger wheel, and I would like the existing wheel to be put onto the small gate. The posts are eventually going to be replaced, but I need the gates square in the meantime.

Looking for someone experienced to install a timber gate at the side of a property in Daylesford, VIC 3460. The job involves fitting and securing the timber gate properly, including hinges/latch and any adjustments required. Please provide your quote and let me know if you can supply the required materials, or if I need to purchase them separately. Looking for someone reliable with fencing/gate installation experience. Photos can be provided if required.

I need this style gate made. 1.5x1.0 Supply only, raw timber not painted, basic timber. Hjt me with with your best price...

We need a gate installed to fit within a 1300 gap. Gate can be any width 850-1000 the rest of the space can be small fence or post. Included are pics of the space (betwee shed and house) AND pics of an existing gate on the property, style we want to match to. Fixing method, open to suggestions, but needs to be secure. Materials - we are happy to pay for, please advise what is needed

Looking for an experienced handyman or fencing contractor to repair a timber front fence in Surrey Hills. Work required: Replace one broken gate hinge. Reattach the fence panel to the timber post (panel has separated from the post). Repair the cracked bottom timber rail of the fence panel, or replace it if it cannot be repaired. Please see the attached photos for the condition. I've also included a close-up photo of the cracked bottom rail to show its size and condition. I would like the fence and gate restored so they are secure and functioning properly. Please quote for labour only. If replacement materials are required (for example, if the bottom rail cannot be repaired), please discuss this with me first before proceeding. Material costs can be charged separately if agreed.

I need a basic timber gate installed in the corner of my back fence. I need it to be lockable

Need a timber gate that matches our new fence to be installed here. We want it so you can only open from the side path not the front outside. Needs to match the height of the fence basically with no gaps underneath as we have a dog. All materials required to be supplied by you.

The bottom rail of my side gate has rotted and needs to be replaced and some pailings need to be put back on

I have 2 existing timber gates with a steel frame in Ballarat. I’m looking to install a gate handle or mechanical keypad lock. May require drilling into the frame and aligning latch. Keen for supply & install.

I have an existing timber fence going to a side patio. I am installing the patio roof. After this, I can’t use the existing gate since it is against the pillars. I need to permanently seal this door and make a new door for entry. I am also open to other options.

Looking for a handyman/carpenter for two jobs to keep our cat contained. Job 1 – Timber Gate (side passage) - Width: 1.3m, Height: 1.8m - Timber frame with timber palings - Self-closing hinges (must shut automatically) - Latch at the top - No gaps at the bottom - Fixed between brick wall and Colorbond garage wall Job 2 – Timber Paling Extension (other side of house) - Width: 1.37m, Height: 0.7m - Fixed on top of existing 1m brick wall to bring total height to 1.7m - Timber palings, no gaps - Cat containment purpose