Find a professional gate installation in West Melbourne

Looking for an experienced fencer/gate installer to supply and install fencing and a motorised driveway gate at a residential property in Braybrook VIC (13 McLennan Street). Please see attached marked-up aerial photo showing approximate fence lengths and gate locations with colour coding as follows: • Green = Existing damaged fence to be removed and replaced (~26.9 m) • Red = New fence sections to be installed (~30 m total) • Blue = Existing front fence (~8.3 m) with possible 1 m height extension • Cyan = New automatic motorised driveway gate (~4.1 m opening) • Yellow = Existing side walkway gate to be replaced (~2 m) Scope of works: • Remove and replace existing damaged boundary fence approximately 26.9 metres long • Install new fence sections approximately 30 metres total length around driveway/side areas • Existing front fence approximately 8.3 metres long — preferably extend fence height by approximately 1 metre if practical/cost effective • Replace existing side walkway gate approximately 2 metres wide • Supply and install automatic motorised driveway gate approximately 4.1 metres wide for vehicle access • Gate must include remote control operation and safety sensor to prevent closing onto vehicles/objects Looking for: • Cheapest practical and reliable solution possible • Durable and weather resistant materials • Open to Colorbond, timber, sliding gate, or swing gate options depending on price/value • Open to solar or powered gate motor systems depending on overall cost effectiveness Please provide: • Approximate total cost including materials and labour • Recommended cheapest option • Estimated timeframe • Whether rubbish removal/disposal is included • Previous similar work/photos if available Location: Braybrook VIC

Lock for automatic door has got the loosen key .

I bought a new house and have a manual steel gate that opens up to the drive way. I would like to use what’s possible to automate the opening and closing.

Front sliding gate currently has an old remote opener that runs extremely slow and often gets stuck. Looking to replace this with a new opener that can handle the double length gate. Installation may require preparation of ground/gate/tracks to ensure it runs smoothly and will last.

The automatic gate motor is not working, the wheels came off.

Install an automatic gate in a 4.4m wide space. The gate needs to open outwards with a remote controller. The gate could be a single swing gate or 2 swing gates for better strength

Buy and install black spearhead gate: Sliding, automatic 1.8m high 3m wide driveway Swing entrance gate 1.8m high 1m wide No concrete pour. Brick fence

The TDA automatic gate opener is not working

Require the install of an automatic gate system. I have the motorized unit and tracks. The gate is manually opened and closed presently on its track. The install will require a small piece of concrete as a base to be installed first in order to have a base to bolt down into. There is a conduit already laid for the power cable to be run from the external power point outside the house under the lawn to the garden gate (5m)

I need main gate and automatic function, width approx 3m and location is Wyndham Vale. Currently there is a colour bond main gate which is bit damaged, photo is attached

Repair the automatic gate, got slightly misaligned due to car bumper, motor works okay.

We installed this gate but the DIY was not a complete job. The gate catches up in the way while it is closing possible due to unlevel ground. This needs to be rectified, the motor, everything is brand new. Please quote for the fix

Automatic gate not working from today.when button on remote is pressed getting clicking sound near gate motor

new installed motorised main gate needs electrical power from house

Need a timber gate that matches our new fence to be installed here. We want it so you can only open from the side path not the front outside. Needs to match the height of the fence basically with no gaps underneath as we have a dog. All materials required to be supplied by you.

Backyard gate replacement needed as old gate has worn down. Timber preferred over Colourbond. 2.3m width X 2m height. Seeking quotes to compare.

I have a timber gate (circa 1m wide) with posts on each side, which I need to move its location by about 500mm.

Outdoor timber gate has detached on one point from its frame thus cannot currently be moved, need it fixed so the gate can be used again.

Timber paling double gate 2.4m wide Job to be completed Asap please

I need help to replace the current side fence with timber door. Please provide two option prices for materials, one with Merbau and other cheaper option. - Due date: Before Sunday, 18 February 2024

Repair timber gate dropped out of brickwork, ( put it back to brick) replace new gate lock

Steps: House is on uphill, need to build steps up till porch. 95cm drop, 80cm in width, 350cm in length. Includes framing, wash and seal. Concrete pathway: 3-4m2 Timber Gate: 1.8m high Timber paling gate - Due date: Flexible

Need help construct a timber gate or a colourbond gate on the side entry. My house is a corner block . Also need to add a lock from inside. Please see photos - Due date: Needs to be done on 2023年7月11日 星期二

Need help construct a side timber gate with locker. My house is corner block. Need a timber gate and the fence next to the door. Around 1.8 - 2m height Date is flexible - Due date: Before 2023年2月26日 星期日

Looking for a quote to replace a timber gate. Approximately 4m wide - posts alongside plus a small area of fence (0.5m) will also need replacing - see attached photos. I am located in Williamstown

Need a timber gate for my new property at wyndham vale. 1.2m wide and 1.95m high

Install and provide materials for a timber or colourbond gate Dimensions : 3m wide and 2 m high - Due date: Needs to be done on Saturday, 3 September 2022