Find a local timber flooring profesional in QLD

Need original hardwood flooring sanded and polished. 15 squared metres was under vinyl so it has some residue glue on top, plus 23 squared metres is already polished and good but would probably benefit from light sanding and polish at same time to match colour (they are next to each other). Total floor space is 38 squared metres. Current polish is polyurethane Matt finish.

I’m in need of old rotted timber stairs and support posts and decking replaced and redone.

I have made some scratches at the timber floor, one off them is quite deep but the others are sort of superficial

I need a few boards replaced. Here and there, where the nails are coming out, I need some decking screws inserted. The boards do not have to be painted . I will repaint the entire deck myself. I can possibly get the timber too.

Looking for an experienced and reliable tradesperson to repair two outdoor timber decks and a small patio area. Both decks require general repairs, and some timber boards may need to be replaced due to wear and damage. The patio area may also need minor timber repairs. We are looking for someone who can inspect all areas, advise on necessary work, and complete the job to a high standard. Details: • Repair of two timber decks • Possible replacement of damaged timber boards • Minor repairs to small patio area • Must have own tools and experience • Please provide quote after inspection Location: Logan reserve Please contact me with your experience and availability,

We need an experienced specialist to repair deep scratches and gouges on our timber floors. Requirements: - Site Visit First: Must inspect in person to provide an accurate formal quote. - Availability: Site visits are strictly Thursday to Sunday only. - Budget: We are looking to pay approximately $1,000 – $1,500 for a high-quality, seamless repair.

Upatair flooring g repair

Looking for a quote to remove old carpet which is laid over chipboard secured to old timber floor. We will then need the timber floor sanded & polished. There may be a couple of broken planks to be replaced or patching required. The area is roughly 55sqm (3 bedrooms, hallway, lounge room).

Looking for someone experienced with timber floors to: • Remove any failing/loose old gap filler • Re-punch / sink any raised nail heads (nail punch set provided) • Clean gaps thoroughly • Apply Sikaflex PRO to floor gaps • Tool and finish neatly Room size: 3.4m x 7.5m (~26m²) Older timber strip floor. I will provide: • Sikaflex PRO (multiple tubes) • Nozzles • Scraping tools • Nail punch set • Vacuum available You will need: • Experience working with polyurethane sealants (Sikaflex) • Own caulking gun • Attention to detail • Ability to drill/sink nails carefully without damaging timber • Clean, tidy finish We’re after clean lines and slightly recessed finish please. Please confirm: • Your experience with timber floors • If you have installed PU sealants before • Estimated time required Labour only — materials supplied.

Carpet was laid over an old timber floor with chipboard secured to the timber. We are wanting to remove the carpet & chipboard so we can polish the original timber floors. Roughly 55sqm (3 bedrooms, hallway & lounge room)

I need to have about 10 pavers re-set around a pool I need to have a pergola decking re-screwed and then decking oil applied. Must have personal injury insurance

Remove pool fence panels and posts as required Remove / dispose of existing fake grass Remove / dispose of existing decking planks Repair and improve support structure as required to meet support requirements and longevity. Allow in quote to replace one bearer at ~ 2.5M each Install Ekodeck Designer series Alpine Ash 137mm wide fitted using the Ekodeck quickfix system. 6mm gap between boards. Replace pool fence panels previously removed. Approx 26m² area to be completed. The area marked with the X on photo is not required as a future room extension is planned Provide many photos demonstrating quality install and near cuts / finish Property is tenanted – access to house via a property manager in Buderim “We Do Property’. Bettie is the best contact All materials to be supplied by installer / tasker

I'm looking to change the flooring of my apartment. Only living room and dinning area. I'm thinking either engineer timber or hybrid. I'll provide the material, just need help with installation. Thanks!

We have a number of timber screens and decks that need re-staining. We use wattyl or sikkens product. All equipment supplied. Rate is per hour

Scratches, buffering, sanding and lacquering timber floorboards

Posts already installed and all timber to finish is already supplied including metal stringers

I need an experienced flooring professional for a two-stage job in my kitchen in Aspley (QLD). Stage 1 – URGENT (before 17 Feb): • Remove existing cork flooring and cement sheet underlay • Deal with nails/staples properly • Leave timber boards clean and ready for kitchen renovation This part must be done before 17 February. Stage 2 – After kitchen renovation: • Sand and polish the timber floor • Match the finish to the rest of the house (appears gloss, but to be confirmed) • Open to professional advice on finish type to ensure a good match Area size: Approx. 2.4m x 2.4m What I’m looking for: • Experience with older timber floors • Own tools and sanding equipment • Ability to match existing floor finishes • Clean, professional workmanship Kitchen renovation is underway — sanding/polishing will be scheduled once installation is complete.

I would like to have timber floating floors laid in 4 bedrooms. There is no furniture to work around

We recently removed a section of wall leaving this hole in the ground. We do not have any spare boards. Total thickness of the boards currently there are 16mm and the width 145mm. We plan to get the lot sanded and polished after this repair is made. Happy to hear quotes on here or in person.

Looking for someone experienced with exterior timber oiling. Scope of work: • Light sanding to prep the timber • Oil 2 vertical timber entrance posts (stilts) • Oil the vertical timber slats on both sides of the front door • Oil the solid timber front door (external face only) The timber has faded and needs refreshing to restore colour and protection. Notes: • Small area only (not a full deck) • Light sanding only – no full strip-back required • You supply your own exterior timber oil and materials • Easy access, ground level