Find a local timber flooring profesional in QLD

Cut up remaining timber deck framing and remove all the timber waste on site. Need done by this weekend Sat or Sun

We are Carrying out a renovation in Ipswich and need assistance repairing damaged timber flooring (previously tiled areas and old wall framing lines).

10 or so hard wood timber floor boards need replacing from our deck. We will order the wood once the measurement’s have been done and ready to be replaced.

I need two floating timber floor tiles replaced as they are damaged, I already have the replacement tiles.

I need a quote for my stairs to be sanded. I was using another bloke from Airtasker who was fabulous but unfortunately he has become unwell and unable to continue the task. I would also want them to have a clear lacquer over the top after sanding. Photos attached of the stairs.

Hi there, I’m looking for somebody who can clean out timber. It’s very easy and just needs to be wiped with magic eraser which we will provide. Ideally, this could lead into more consistent work just doing odd maintenance tasks around the house. I’m going to post this at $200 which would be five hours work at $40 per hour. Any ongoing work would be $40 per hour.

Light sand and recoat internal timber staircase – Moffat Beach Budget: $1,000 Looking for someone experienced with timber floor or staircase refinishing to lightly sand and recoat an existing internal timber staircase. This is not intended to be a complete sand-back to bare timber. The existing clear coating and timber colour are generally to remain. Scope includes: • Clean and prepare the existing timber surfaces • Lightly sand/de-gloss all stair treads, risers, winders, nosings, timber handrails and posts • Sand and feather several significant scratches and gouges as far as reasonably practical • Hand-sand corners, edges, curved nosings and handrails where required • Protect the recently painted adjoining walls and surrounding floor finishes • Thoroughly vacuum and remove all sanding dust • Apply two coats of owner-supplied floor-grade polyurethane • Lightly sand between coats if required by the product instructions • Complete final clean-up The tasker is to supply all sanding equipment, dust extraction, abrasives, masking, brushes, rollers, trays and other consumables. I will supply the polyurethane. Please state: • Your experience sanding and coating timber stairs or floors • Any exclusions from your offer • Photos of comparable previous work Please do not offer if you have no prior timber floor or staircase refinishing experience.

Installing new timber floor tiles.

Repair / Replace a Few Timber Floorboards in Apartment – Gold Coast Hi, I’m looking for an experienced flooring tradesman or skilled handyman to repair or replace a few damaged timber floorboards in my apartment in Surfers Paradise Gold Coast. I do not have spare floorboards available, so the task will involve sourcing and supplying replacement boards that closely match the existing flooring in colour, timber type and finish. Job requirements: * Assess the damaged timber floorboards and recommend the best repair solution. * Source and supply suitable replacement boards that closely match the existing flooring. * Carefully remove and replace the damaged boards. * Ensure the repaired area is secure, level and neatly finished. * Minimise any damage to the surrounding flooring. Please include the cost of labour and materials in your offer, along with your availability. I can provide photos of the damaged area to assist with quoting. Ideally, I would like someone experienced in timber flooring repairs who can achieve the best possible match with the existing floor. Thank you!

need the edge of my timber deck cut back to a straight line so tiles can be laid against it. The deck boards were laid unevenly, so the edge isn't straight. • deck length: 10.5 m • Starting point is the far wall in the house. At that point the line needs to sit about 10-20mm from the reference, then runs dead straight for the rest of the length. • Accuracy is the priority. The line must be set out and cut precisely, as the tiles will butt directly against it. • own tools needed

Finish building a timber deck. Joists need noggins and ends trimmed. Timber decking installed. All timber on site.

I have approximately 70 square meters of timber deck that I want painted grey. I will supply paint it will need 2 coats. Needs to be cut in around some edges and it has 2 sets of stairs I have pressure washed the deck and it’s ready to go

We are planning on having vinyl flooring installed. Currently the floor is too uneven and squeaky for the flooring company to do the install. We'd like the floor made level and even and the squeaks eliminated. The floor in the hallway, three of the rooms, and a wardrobe is old hardwood timber planks and in a fourth room the floor is large plywood sheets, photos attached. The total area is approximately 60m^2. There's also some gaps that need filling too. It's on the second floor of a house. Please ignore my $10 price and let me know if you need more info before suggesting a price. Cheers, James.

Looking for an experienced flooring installer to install vinyl planks to my downstairs area and wrap an internal staircase. Scope: * Install vinyl planks over existing tiled floor (approx. 36m²) * Cut back existing bullnose stair edges to create a square profile * Install matching stair nosings * Install vinyl planks to stair risers and landing * Caulk all perimeter edges, stair stringers and other visible gaps for a neat, finished appearance * Clean, professional finish with neat transitions Stair details: * 12 stair nosings/treads * 14 risers * 1 landing I will supply: * Vinyl planks * Matching stair nosings Installer to supply: * Adhesives * Tools and consumables * Caulk Please only apply if you have experience installing stair nosings. Photos of similar work would be appreciated. i’ve also included photos of the stairs as they currently look, the current tiled area, a photo of the stairs nosings side profile, and AI mockups for how the stairs and downstairs area should look once complete

I need a quote for my stairs to be sanded. I started sanding myself but I unfortunately have injured myself and am on Workcover now so the stairs are 1/4 finished but I need the rest done! I would also want them to have a clear lacquer over the top after sanding.

Please offer hourly rate thanks

Rough sand of posts and 2 coats of Aqua deck which i have. Only sun facing posts are worse as in last image.

Assemble Asco Shed Timber Flooring Kit which comes with screws, not nails. All necessary hardware and fixings for the timber frame and floorboard installation are included in the flat pack kit. 1.58m wide and 0.78m deep.

Clean & Oil Timber Deck Looking for someone to clean up and oil my timber deck. The job includes: * Sweep and remove leaves, dirt and debris. * Scrub the deck to clean it and prepare it for oiling. * Apply 2 coats of decking oil for a nice, even finish. I can supply the decking oil and tools, or you can provide your own if you prefer. When you reply, please include your quote, availability, and any photos of similar jobs if you have them.

Scrub plant pot stains off a timber deck… please note that the property doesn’t have power.