Find experienced local fencing contractors in Windsor

Replace old white ant eaten fence with chain wire fence. Approximately 16 metres by 1.2 high - Due date: Flexible

I have 3 colonial wooden fence palings that need replacing on my front gate. I have the replacements but they will need to be shortened slightly so you will need to bring a saw and some galvanised nails. - Due date: Needs to be done on Saturday, 7 October 2023

I need to secure a layer of mesh over an aluminium pool fence panel to hardwood posts/wooden fence panels on either end. Will need to bring own nail gun and nails to complete job. Should only be 20-30 nails as the fence is 1200 high - Due date: Before Sunday, 10 September 2023

Attach fence rails to existing posts, attach 11 fence panels to rails, adjust picket height on 3 fence panels to continue scolloped pattern. Will pay 300 - Due date: Flexible

Build fence section of about 2.2m and then install behind concrete bench. All materials except nails are provided. Requires recess in one post to fit the fence in due to the concrete bench encroaching slightly on the fence line (refer photos). The other side there is enough room with the post at the original size.

Pool fence is misaligned and isn’t closing easily. Needs repair so self close can work effectively - Due date: Flexible

Need a fence that is looking very old to be tidied up. I think the rails look okay. Fence needs a bit of straitening and all the pailings replaced. About 20m of fencing. - Due date: Before Friday, 15 July 2022

Fence is out of alignment due to the floods. Metal fence needs repair. - Due date: Flexible

Looking for a fencer to install front fence about 10m length including 3m electric gate. Fence and gate will be supplied. PVC 1.8m height. Let me know if interested to quote

Timber fence and 2 gates required - need a quote. - Due date: Flexible

I need shade cloth attached to my side timber fence approx 21meters long. I have purchased the screen shade cloth plus fasteners and cutter. 1.83m wide Shade cloth will/may need to be cut to suit fence. I want the fence cover from the top backer rail to the bottom backer rail along the full length of the side fence. I am only covering the side fence to stop my children from putting their hands through the picket fence where there is a real risk they may be bitten by the next door neighbours dog.

Timber fence and gate to be installed on either side of house. One side is 138cm and other is 200cm approx. both sides require a gate. See images attached for where the fences and gates are required. Need someone who is able to supply materials also.

I have a Framless glass pool fence that need installing around a new concrete pool area 26 core drilled spigots. One gate. Location Windsor 4031.

Want a picket side fence built. 17.5m off fence and 1x 1 metre gate. Starts at 6 foot and follows the slope to the front

I would like a timber fence built. Approx 16m tapers down a slope as shown in pics. Please include supply and install.

Sorry all. Builders not giving me permission to access site till hand over in 2 months. I’ll repost this around this time. Thanks. I have a 54m new timber paling fence Palings are butt together All fence is on a 800-600mm concrete sleeper retaining wall. Ranges from 1.8m high -1.0m high palings. I’d like to Discuss options with paint supply Only paint one side.

-Remove chain wire fence and steel Round posts -clear brush on fence - take away Some timber and concrete bits - take to tip - I have BCC to vouchers

My dog tries to escape. I would like a dog proof gate to be provided and installed at the front landing at the top of the stairs. The dogs weighs 30 kg. It needs to be a strong gate, preferably automatically spring closing and easy to use.