Find experienced local fencing contractors in South Brisbane

I have the brackets and nails and net , wood fence, 3 sides, 1m x 2m x 6m . Need them drilled in and net installed on the brackets

invite quote to build 10 meter garden edge

Hi guys, One piece of my raised garden retaining wall timber is rotten, and need replaced! Need you to source and replace for me. Timber size is 2310mm * 200 mm * 55mm Please see pictures

100 meter color bond fencing

Install 3 x glass panels and glass gate. Extend garden fence approx 1800h x 1500w remove old metal pool fence.

Wooden garden gate requires re-attachment to wooden fence, including hinges and padlocked bolt. (Photo shows gate wedged into place). Requires hinges to be drilled into gate post. - Due date: Needs to be done on Wednesday, 8 November 2023

We have a colour bond fence that has some slight subsidence and misalignment in the posts, there are 10 panels and 11 posts, of which about 7-8 posts will need digging around realigning and lifting and additional concrete adding to get fence back to straight and aligned. The neighbours side is a concrete sleeper retaining wall that could be used as a lever to lift the fence/posts and access is allowed (see photos)Last photo is view of neighbours showing concrete sleepers. - Due date: Flexible

The wooden beam at the base of our fence has split/come loose, and as a result the fence is leaning to one side. We are not looking to replace the entire fence, just looking to repair it. - Due date: Before Monday, 13 February 2023

Repair approx 23m long wooden 1.8m garden fence shared with neighbor next door. Base of the fence has been rotten. Repair with galvanized steel base with concrete foundation as in example picture attached. There are a total of 20 fence posts at the Western boundary. - 9x fence posts with signs of rotten at the bottom of the posts and required to be installed, possibly with concrete and steel fence brackets. - 4x the bottom of the posts are OK, but top of the timber posts have rotten. There should also be replaced. For repair please submit your best offers. - Due date: Flexible - but need to complete by beginning of December

Hi, I need a small fence built between the wall of the house and the fence to block my dog from escaping out the front yard when we open an electric gate. I have tried dog proof chicken wire fencing MDF boards, bricks and he’s managed to dig under parkour over or bite through. Could be a gate built out of wooden pallets or fencing wood from Bunnings but just something to keep him in that is sturdy movable at the end of lease and tall. The dog is parked kangaroo.

The front of our house has an outdoor entertaining area and we are looking for help to put up some sort of fencing around the yard to keep our pup safe.

Ideas & assistance to erect a temporary fence. I can help until next Thursday. I thought an orange builders fence with star pickets and cable ties & tent stakes. Probably 20m worth. Just to keep a puppy in while supervised

Installing colorbond fence with retails - two sides - 18 m And 19 m Ths

Complete cat proof fencing. -Run wire rope 12 meters. -Attach 6 meters of chicken wire to 2.2m star pickets with right angle brackets on top. -Attach 10 meters of chicken wire to 2.5 meters to the top of star pickets and right angle brackets. -Drive one star picket in to the ground. -Put up wooden brackets which will have to be cut down to size. I have the treated pine. On top of the brackets needs to be either colour bond or corrugated roofing plastic. This has to be on top of a colour bond fence and stretching about 6 meters and 1.8 high and another 4 spots 1m x 1.8 high and attached to concrete. - the existing fencing needs to be tweaked and secured. So tightening wire ropes, using tie wire and c-clips in areas. -a pet gate to be put in one spot by being slid in between pre existing star brackets. Then tie wired on. -Balinese screening to be tie wired to shade cloth -thunderbird electric fence topper to be but on 50 meters colour bond fence. This consists of putting up 20 plastic brackets and threading wire through twice. - you will have to pick up the gate I have pre-paid for along with the roof sheeting. I have a ladder but you may need a taller one. I have a star picket driver and most of the fixings I have too. There is a bunnings 5 min drive away so I can always go and collect anything on the day needed. Please only take this job on if you are familiar with working with chicken wire and temporary fencing. It must be secure and look very presentable. Any zip ties that have been used must be snipped of and replaced with tie wire. This job is suited to someone who is familiar with this work and likes to make things look nice as well.

I would like to build a dog crate that’s have four door yet and is from mood and no dogs can see each other and there is some trees that it will take off 70s and put it in somewhere else

Need a boundary identification surveyor for my property

We have a side gate that our dog escaped under. We need someone to build or attach something to the bottom to prevent this from happening. It will need to be opened and closed so bins can be taken out etc so functionality of the gate needs to remain. Let me know thoughts and offers!

I need one panel of Cala bond fence removed and on the other side of driveway, one and a half panels, removed and remaining half panel to be intact. There are four concrete slabs to be laid two are rectangular and the other two next to the driveway and down the fence line aer odd shaped. The drawings supplied might help you decide if you want to come in and quote. Regards, MICHAEL - Due date: Flexible

Need old fencing removed and a new dogproof fence built to replace it in backyard of unit. Fence is 220cm long. Tasker to supply materials. I will reimburse Tasker for materials plus handling. - Due date: Flexible

We would like a quote for someone to go get the materials and build the dog fence - Due date: Flexible

I have exiting fence but the dog sneak out to neighbor. Need to fix and install panel on the side. - Due date: Flexible

Need about 8 to 10 meters of fencing - Due date: Needs to be done on Tuesday, 3 May 2022

We’re looking to have a gate installed along the side of our house. The total width is 1.35m, with a 1m gate and the remaining gap to be filled with Colorbond sheeting. We’ve already purchased the gate, two posts, and the Colorbond materials. We also have photos available so you can see the space and measurements more clearly.

Gate section needs to be re-welded. If possible, we'd also like the gate to be fixed to the adjoining colorbond fence. (Not sure how, open to suggestions)

Four fence panels are leaning outward from the posts. The screws appear loose and need to be tightened or replaced so the panels can be aligned straight and secured safely.

Need colourbond fence to be done on top of retaining wall, it is 19.5m long, fence is already on-site, just need help or someone to do it for me.please

Existing fences (two sides) need to be removed and new fence erected. One neighbour may need a Colorbond fence.

Just had a double colourbond gate installed but want it to be electric opening.

12 l/m of colourbond fencing to install. All materials onsite with rapid set

Need 8 l/m fencing installed at my gravatt. 3 holes dug all materials onsite incl rapid set 2-3 hours work

Hello, I need a Colorbond fence repair along one side of my neighbour’s and my property. Unfortunately, the fence was originally installed by a poor-quality contractor who only used 1–2 tek screws from the fence post to the steel bracket at the bottom . With the strong winds yesterday, the wind load caused the tek screws to turn, allowing the fence to lean over. The fence on the opposite side of my property is undamaged, as it was built properly using a minimum of two heavy duty tensile-rated bolts with locking nuts on every post, along with additional tek screws. To fix this, I need the Colorbond sheets removed, the posts relined back straight, and new tensile-rated bolts and locking nuts installed in the designated bracket holes, additional tek screws installed, then colorbond sheets reinstalled. There are 20 Colorbond fence panels along this side of the house and 1 panel on the other side, and all will need to be repaired to ensure proper integrity along the length of the fence to withstand future storms. I’ve attached photos showing the issue and the repair work required. The Colorbond sheeting itself is undamaged. The colorbond panels are 1.5m high with 0.3m of breezeway slats. The post are 1.8m. Ideally, I am looking to have the work completed before the 4th of December. Located in Cannon Hill. Welcome to view, i have straightened the fence back up temporarily until it can be fixed. Thanks

Need a quote on what it costs to fix as unsure what replacement panelling is needed.

Hi - we need a fence Put in - colorbond - about 56-60 linear meters in Algester - just wondering what your cost would be ?? Will need a sleeper on one side of property about 30 odd mts . Prefer concrete. Please can you provide quote ?? Currently there is a mesh fence in place which needs to be removed - thanks

Hi there! Are you able to provide a quote for the below please? 29m Colorbond Fence: Need supply and install 29m colorbond fence, 1.8m high with one row of timber sleeper (200x50) under the fence on right hand side of the property. Removal of 29m Old Fence: Need removal and dumping of 29m existing timber fence.

One piece colorbond fence was dented (by my dog) checking if anyone can help to repair it. Thanks

Supply and Install Colobond fence approx 30m long in new house

I need a Colorbond fence built at the front of my house. The section from the existing fence to the wall is approximately 2 meters. I would like it to match the style and color of my neighbour’s fence for consistency.

Need assistant to install 28m of colour bond fence. have bought materials from stratco, will supply concrete bags, and anything else required. After someone with experience and efficient with task to be completed. located acacia ridge. Will take out old fence, dig holes, drill/rivot (anything to assist in the process) Quote day, hourly or project rate. Do over 2 x weekends if desired or weekdays is fine. Fence removal and install in sections or whole is fine as well.

36m fence L shape, the existing fence will be removed before you start. Location Loganholme

Bulding a fence 12.5m long. Need a colour bond fence.

retaing wall with concrete slabs and some colourbond fence

appx 17m new colour fence, two gates. street number and letter box. remove appx 3.5m timber fence/gate.