Find experienced local fencing contractors in Marrickville

I need someone with a nail gun to repair timber fence. You need your own tools! - Due date: Flexible

I have had a new fence put in. My neighbour's side is higher than mine and there are gaps under my fence. I would like someone who can come and install an edge under the fence line. Tidy up the garden beds. - Due date: Flexible

Scope as below: -Supply and install new Colorbond fencing on side(10m)and the back(3m) -Supply and install a new Colorbond sliding gate(non-automated) (3m) -Demo,remove and dump existing timber fence at the back(only) Colorbond fence and gate must be standard sheet, 2.1m high, Shale Grey color Posts will be grouted at side and bolted to kerb at thr back Tree stump will be removed before this work starts - Due date: Before Sunday, 21 January 2024

R & r paling fence with colourbond 29m long x 1.8m high

Our colourbond lattice fence needs a gate installed. A post will need to be drilled into the tile of the patio. Please advise if a gate needs to be purchased of if one can be made from the existing fencing. - Due date: Flexible

We have purchased a new side gate, and need it installed. Posts are existing in the spot, but need to be removed and replaced (to the appropriate width to make the new gate fit) as they’re rotting. Must supply, posts, hinges, latch, and all tools needed to get the job done. I will stain and oil gate and posts. Gate hole (from wall to fence) is 1180cm width. New gate is 90cm width. Old gate was 1m width fyi. - Due date: Flexible

Hello, we are renting and the side gate has fallen apart. I’m looking for an affordable solution for a new gate, installed, or for someone to fix the current one. Current gate is 1m width. Pailings are in tact (with old nail holes but timber still usable). However, the frame is falling apart (timber is disintegrated), so at a minimum the back frame needs to be replaced, new hinges attached etc. if you’re fixing the current gate, you’ll also need to clean it up and give it a paint. Price includes everything you need to do the job. Thanks

Existing fence, cut in x2 to form x2 gates nom.1200mm wide x 900mm high. Add hinges and centre locking mechanism and reinstall. - Due date: Flexible

Brick fence segment fell, some old bricks still there. Need to relay and cement fence segment - Due date: Flexible

Due to significant rain the panels on the gate have swollen and is causing the gate not to close. We require: Wood panels from gate to be removed (we’ve removed a few already) Sand and re-stain all wood panels Trim the 4 wood panels that are causing the gate to no longer close (approx. 1cm trimming required) Refit wood panels to gate Install new lock (provided) to gate n.b. a few of the panels have stripped screws. - Due date: Flexible

Front brick fence which is built onto concrete slab for demolition and removal. Dimensions are 240mm thick throughout, 670mm high with 6 X 720mm pillars. Total length of fence to be removed is 11 800mm. White concrete pillar section between columns, half to be disposed of, half will be kept at the property. Ground level, no access issues, wide street with no parking restrictions. Parking in front of property or in front yard (could fit light truck) - Due date: Flexible

Measure, source and install new metal wood-look slates on front of house privacy screen and gate. Replace lock on gate. Remove & dispose of existing wood slates - Due date: Before Friday, 16 December 2022

We need a wooden slat fence installed to sit in front of an existing colorbond fence - there is currently a bamboo screen that needs to be removed (it's tied on. Photo 1 is our fence on the other side - this is what we're wanting with a 0.5cm gap in-between the slats. Details are: - Treated slats, but not stained - Dimensions (approx) 10m in length - We need a bit of space in-between planks - approx 0.5cm - There will be two heights of screening: * 1st section 2.1 high from ground (this section will sit in a garden bed - see photos - so you will need to allow for longer timber to anchor to bottom of bed, approx 0.6m) * 2nd section 2.1M high, to sit on a level concrete path Please quote for all materials and installation. Thank you. - Due date: Before Thursday, 29 September 2022

Installation of Colorbond fencing approx 8 meters total with single slat at bottom. 1 single gate Another location same house 5m colorbond fence on concrete slab which will need coring 1 single gate - Due date: Before Monday, 25 July 2022

a section of the fence to be bricked up with a few rows of bricks and length of fence needs capping - Due date: Before Monday, 1 August 2022

Brickwork required for new front fence. Four brick pillars required to mount new vertical skating and gate (note part of scope), plus raising existing fence line on the left hand side of the driveway(as look at the photo). Scope. 1. Raise ground on left hand side to align with existing rendered posts - starts and 136mm and goes to 186mm as the road slopes down. 2. Build 4 new posts, the 3rd one along should be big enough for a built in letterbox. 3 posts left hand side of driveway, one post on the right (when looking from the street. 3. Includes all footings, sand and cement to match house as well as labour, bricks to be supplied by owner are bowral blue. 4. Build new concrete step to connect to existing steps - this is because you would now ‘step up’ as you walk in as level is being raised. Level is being raised to prevent rain water run off from street. Have included a rough example of want it will look like. Rate is for labour only, and sand and cement. Can be flexible once an inspection is made. - Due date: Before Sunday, 31 July 2022

trees were looped and fence is swaying in this wind - Due date: Flexible

9m of new 1.8m high standard colorbond fencing. Colour is green. Plus new pedestrian gate. - Due date: Flexible

Replace an existing wooden overlayed slat garden fence - approx 44 metres long.

To install a picket fence and gate in the inner west