Find experienced local fencing contractors in South East Perth

We had a handyman build a fence and he was going to fix the gate but has become unwell so we need someone to finish the job! We need a garden gate fitted. We will source the gate, but not the hardware to fit it, so you’ll need to source brackets, screws etc.

I am looking for a handyman or tradesperson to install a self-closing spring or hinges and a latch on a garden side gate. Job details: • Install a spring for self-closing function on garden side door • Install/adjust hinges as required • Ensure the gate closes properly and aligns correctly prefer someone with Own tools and equipment.

11m fence install. Already have the supplies.

For front fenced lawn, I need metal slate gate ( Matching slats). It will be 2 doors of approximately 1 meters by 1 meter.

I require a timber garden gate - 1800h by approx 900w - to be installed between an existing bamboo fence and brick wall of the house. There is a steel post (50mm x 50mm) concreted in, supporting the fence, which may be able to be used to swing the gate from. Width from outside of steel post to house wall - 1210mm. - Due date: Flexible

I need a gate and posts replacing. Quote to include gate and installation. - Due date: Flexible

Back Garden Fences - 2 panels need to be replaced or fixed. Please see the photos for more details. - Due date: Flexible

Install 2 x 900mmx1800mm panel and fence gate.

Hi everyone I need a side gate installed to stop my dogs escaping. Doesn’t need to be anything fancy just something that will stop them escaping

The dogs dig under the fence need some dog proof wire or something installed open to suggestions

Enclosure net, brackets and all other materials have been purchased just needs to be attached to the existing fence. The enclosure doesnt enclose totally as in roof. It is fence extension brackets attached to fence and then a wire netting put along the brackets to extend fence height. Most of the fence is wood, a small part is metal and an equally small part is brick. I have all necessary attachments bought with fence extension wire. I hope this helps. Approx 20 - 25 m In my head it would take 8 hours. I am happy to work as a side kick.

Glass pool fence and fixings to be moved to new location new footings will need to be done

Relocating approx 20 mt Colorbond Fencing 90 degrees

I have a dog enclosure 2200Wx 2200L x 1800H that needs new fence meshing I bought from Bunnings. Not that much work I have all the stuff to put the mesh fencing together. I’m going overseas on the 20/02/23 I would really appreciate it if someone can help me please! - Due date: Before Monday, 20 February 2023

Need to replace colourbond fence damaged during the recent storm. Two sections are involved: One section - one upright, two horizontals and the infill panels survived. The second upright did not and will need replacing. Second section - all has been damaged and needs replacing. As the second upright in this section is cemented in with the upright of the adjoining (untouched) section, both these uprights will need to be replaced and the existing concrete and posts removed. The middle two uprights from joining the two impacted sections will need some consideration, as the ground level has changed with how the tree has fallen.

I am hoping to get 1.8m colorbond fence along my current fence. Not looking to remove current fence. There is sand and concrete to installl in and fence is approx 25m long. Fleximble with the cost

i require 2 section of colour bond fencing repaired and my pool gate replaced

The colour bong gate just needs a couple of new hinges put on top of the gate and some fixings put in the cross member support on the back of the gate

I want to partially enclose my garage with one large colourbond panel in Grey Ridge. Supply and install needed, suggest site visit to confirm measurements etc. Solid brick wall to one side and post or similar will need to installed into concrete/paver.

We’ve had a tree fall on our colorbond fence and requires a panel to be supplied and installed

Colourbond side gate with key lock . Width 1220mm opening side of the home. Can you do for $500 supply and installation please

I need 2x secondary Colorbond plinths installed under an existing fence to bridge a ground-level gap. Install 2 panels of secondary plinths (approx. 4.62m total length). Move the sand and install the secondary plinths in that section and make it level, you can leave that corner section that already is covered partially by a retaining wall. You may need extension clips to make it level with existing posts.

One panel of colourbond fencing has come out of top and bottom rail as fence has leaned out. Panel needs to be fixed and bolted or pot diverted to shed to stop it moving again

Hey, I need to install about 20 meters long Colorbond fence at the rear of the house where some of existing fence was fallen down and been removed and some of it is still standing which needs to be removed. The old fence is cement sheet fence. Contractor must have public liability and workers compensation insurance before start the project.

Install PA gate with side panel - colorbond 1.8 high 1.7 width PA gate - approx 1m width Side panel- approx .7m width Belmont area

removal of 1 x pillar and wall section and replaced with colour bond fencing to match the existing colour bond on the neighbouring property. Skip bin and fencing requirements supplied by client.

Build 9m of colourbond fence. All consumables supplied and ready, 2bags of concrete per hole. All colourbond fencing on site ready to be installed. All 4 holes dug already to around 400-500mm might need abit more depends on height alignment of rear fence. Just have ran outta time and need it done to mark my boundary.

Installation of plinths under a colorbond fence 2 plinths on the first photo and 1 plinth on each of the other 6 photos

Looking at Colour bond fence replacement. Involves removing old panels, installing new and reinforce steel fence post. Will discuss if it is a bigger job

3.2 metre section of colorbond fencing fell down and needs replacing/fixing. I dont know the cost so put $10 just to create the post.

Supply and install 50m Colorbond fence, while remove old fence.

I am looking for an experienced and reliable fencer to supply and install a Colorbond fence panel to replace a damaged section. Details are as follows The panel is less than 2 metres in length, standard height Standard Colorbond fencing required Colour to match existing fence or closest available match

I need a colour bond fence pole dug out and a new post replaced

3 metres width Colourbond gate needs to be replaced with something less expensive. The gates are damaged. This area is prone to high wind.