Find a professional wrought iron fence service in VIC

I need a welder or metalworker to replace the two hinges on a wrought iron garden gate. This budget is for labour only. I will supply and pay for the hinges and fixings separately. Please do not include hardware costs in your offer. The gate: Single leaf, approximately 2 metres wide Open picket style, estimated 40–80kg Both the gate frame and the gate post are hollow steel square tube Street-facing front gate on a brick pier Existing hinges are old hand-made welded barrel hinges, rusted and worn Photos are attached — please look at them before making an offer. Scope of work: Support the gate, cut off the two existing welded hinges and grind the surfaces flush Weld the gate-side half of each new hinge to the gate frame. Tack weld and check alignment first, then complete the welds using a staggered sequence to avoid distortion Mark out, drill and bolt the post-side half to the hollow post using through-bolts with backing washers or plates, or rivnuts — not self-tapping screws alone, as the top hinge carries a tensile load Check the gate swings level, closes correctly and does not scrape Clean the welds and touch up all bare metal with cold galvanising primer and a matching topcoat Hinges: I will supply weld-on / bolt-on gate hinges rated to at least 150kg. Please tell me in your offer: What fixing method you would use on the hollow square post Whether you need me to purchase any specific bolts, rivnuts or backing plates so I can have them on site before you arrive I have a second gate of the same type. If this job goes well I will book you for that one as well — you are welcome to quote both leaves together if you prefer. Requirements: Own MIG or stick welding equipment, plus angle grinder, drill and metal drill bits Access to power, or your own generator Demonstrated experience with gate and fence welding — please mention similar jobs in your offer

Need an iron grill gate installed

Require repairs to wrought iron balcony see photos

Need person give me a quote about installing iron fence

One side of the gate is stuck, need to fix hinge

My house has an ornate iron front gate which I need modified to prevent dogs from running out. I need someone to either match the iron work or to install some simple cross bars. I want to contain my dog while still preserving aesthetic.

6 panels of Wrought-iron fence panels Each panel is appropriately 1.6m wide and 500mm high. Need decorative Wrought-iron designs.

New cast iron sections x 3 of lacework panels to be installed into existing fence. Will need screw holes drilled and one panel shortened to fit. Reinstall one panel used for casting. Paint too (paint supplied). Please describe your experience and supply examples of your work. This will go to the best, possibly not the lowest bidder.

Needing 130–140cm high fence build - corrugated iron and timber - old style . It will be built to protect fruit trees , will add iron to existing fence also - it’s about 10m long (wide) . Should only take half days work to do it. Materials supplied

Fence gate need to cleaned. Some rust repair and cleaning . Painted

I am looking for an experienced fencing contractor to replace my existing wooden picket fence and wooden pedestrian gate with a new heritage-style black wrought iron fence on a bluestone base. Scope of Work: 1. Demolition: Removal and disposal of the existing beige timber picket fence (frontage) and the white timber pedestrian gate (entry). 2. Masonry Base: Supply and installation of a new bluestone plinth/base. Please specify if you use solid bluestone 3. Ironwork: Supply and installation of black spear-top iron fencing and a matching pedestrian gate. The design should match the attached reference photo (black Victorian/heritage style with decorative spears). 4. Finish: All steelwork to be galvanized and powder-coated black for durability. Site Details: • Location: South Yarra/Inner Melbourne area (Terrace home). • Access: Street frontage is easily accessible. • Reference: Please see the attached photos for the current site conditions and the desired finished "look" (Black iron on Bluestone). I am looking for a high-quality finish that suits the period nature of the home.

Small Bolts coming away from Wooden Fence Posts resulting in outward-leaning Corrugated Iron Fence

I am planning to build a new front yard fence with the following specifications: • Total width: approximately 17 meters • Height: 1.5 meters • Structure: brick wall base with wrought iron panels on top • Gate: one automatic sliding/swing gate for vehicle access The photos are current looking and what I want to make Price is negotiable

I need a wrought Iron fencing and gate painted. Fencing is 0.6M high and 12.5M in length Pergola fencing is 0.8M high and 8M in length Gate is 1.8M high and 3.25M in length All white paint. Some cracks / rust will need to filled in.

Hi we have bulit a chicken coop from temp fence panels I need someone to screw 2x4 beams on top of the temp fencing then screw the corrugated sheets into them the coop. Is 12x5 mtrs preferred someone that can bring their own drill

Replacement of approx 10 metres of wooden rails + 4 wooden posts. Some corrugated iron panels may need replacing Boundary fence with a block of flats

Site inspection and quote for installing a simple rural screening fence using treated round fence poles with concrete foundations and corrugated iron roof sheets along the perimeter of a property in Creswick. Fence height to taper up to 2 metres high along a 50 metre boundary, with poles 2.4m apart.. I can be available to help position poles and sheets. You will also provide a list of materials to purchase. The job will be listed on Airtasker.

The brick fence that the iron fence is bolted to has moved slightly so that now the gate doesn't close properly and doesn't lock. I've had a look and I think the easiest fix would be to remove the old bolts, place spacers between the iron fence and the brick wall, adjust so that the gate closes properly and can be locked and insert new bolts.

Replace 3 rusted metal railings. Requires welding. Once repaired the iron gate needs to mounted between house and new fence. All tools and materials to be supplied by contractor. Site visit preferred to discuss requirements. Willing to pay extra for additional services.

I have 19 metres of wrought iron gate at the front of my house that I want to restore. So I'm looking for someone to take it from the premises, remove the paint and then have it painted again, then re-installed at the house.