Find a professional wrought iron fence service near you

Fill a short form and get free quotes for wrought iron fence services

4.5

Excellent rating - 4.5/5 (9200+ reviews)

Need help with your iron fencing?

  • Wrought iron fence repair
  • Wrought iron fence installation
  • Residential wrought iron fencing
  • Iron fence restoration
  • Iron fence repainting
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
Up to 50% cheaper than franchise dealers
No job too big or too small
No job too big or too small
Free insurance coverage
Free insurance coverage
Secure cashless payments
Secure cashless payments
Same day / next day service available
Same day / next day service available

Best rated iron fencing near me

Recent Iron Fencing reviews

"Excellent job. Quick, tidy and efficient. All as agreed! Will call on Diz and his crew again. "

Cast iron fence painting

$600

"Karel completed the task this afternoon. He is diligent nice gentleman who know what he is doing. I recommend him to anyone who expects good work."

Alignment of wrought iron gate

$270

"Chris was prompt, courteous and did an amazing job. Highly recommend. "

Fence / corrugated iron fence

$100

"Wonderful to deal with, great communication and job done early! Thanks Darren!"

Cast Iron Gate footing needs repair

$250

"Even better than I hoped for. Perfect!!! I would recommend Clinton if you want something done right and done quickly. Thanks, Tania"

Cut & attach iron to fence

$200

"Tom is obliging and hard working until job is done. Highly recommend him."

Install heavy iron gates

$400

What's the average cost of a Iron Fencing Contractors

$159 - $430

low

$159

median

$254

high

$430

Low, median and high bar chart distribuiton

Average reviews for Iron Fencing Services

based on 23 reviews

4.96

22
1
0
0
0

What is Airtasker?

1

Post your task

Post your task

Tell us what you need, it's FREE to post.

2

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

3

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available!
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

30

Tasks successfully complete

1

Avg. quotes per task

22

hrs

Avg. time to receive offer

Why book an iron fencing service through Airtasker?

Iron fencing can work as an effective security measure that adds beauty to your home. As valuable a feature this is, how do you get it?

Simple. Book an expert installer on Airtasker! You can do away with the tedious task of looking for nearby wrought iron fence installers through our platform. Not only do you have to contact them individually, but you also have to compile and compare their rates and service packages. Airtasker can speed up and simplify your search - post your budget, and you'll receive offers from several Taskers in minutes!

Don't be surprised if you get a lot of free quotes from experienced Taskers. You can easily see their reviews and ratings from past clients along with their rates, so it's easy to compare and make an informed decision. Book the Tasker you think is best, and they'll get to work on your iron fence.

Getting that new iron fence put up on your property isn't as complicated as you think - not when you use Airtasker, so use the pink button!

Offers in no time

Offers in no time

Start getting offers to do your task ASAP!
Flexible pricing

Flexible pricing

Choose the offer that’s right for you.
Real reviews

Real reviews

Judge for yourself – every task gets a review.
Local, skilled pros

Local, skilled pros

Take your pick of skilled Iron Fence Experts nearby.

Top Iron Fencing related questions

Yes, this is highly recommended. Setting the posts of an iron fence in concrete gives each of them a solid base. When placed on concrete, the posts of your iron fence are less likely to lean like the Tower of Pisa over time. Even one errant post can lead to many costly problems down the line, as you may have to uproot your entire fence to fix the issue.

On average, it can take two to three days to install an iron fence. That's due to the one to two days needed to let the concrete on each post dry. Another day or two is required for attaching the rails and the gate. Expect the service to take more time if your iron fence spans a large perimeter. You can ask your Tasker for an estimate of how long the job will take.

There are a few ways to maintain your iron fence and extend its lifespan. It's recommended you hire someone to trim unruly vines or plants that wrap around your fence, as these can remove its protective powder coat. Avoid intentionally wetting your iron fence when sprinkling your lawn and move sprinklers away. Sand off any rust spots and cover the sanded area with a coat of paint. You can also hire someone to paint the entire fence.

Only if you have the experience, the right tools and equipment and know exactly how to put up a fence (iron or whatnot) that complies with all your state's regulations, building codes and safety standards. If your installation fails any requirements, it can be more expensive to fix the fence to make it compliant or remove the entire fence and start over.

As long as you have your local council's approval, you don't have to inform your neighbours if you're putting up a fence. Still, it can be a good practice to give your neighbour common courtesy and let them know. If you inform them and don't object to it, you have a defence if they dispute your fence in the future.   

In general, fences must not be higher than 1.8 metres. If it's built from masonry, it can't exceed 1.2 metres in height. If it's along the boundary of a primary or secondary road, your fence is limited to a maximum height of 1.2 metres. When planning to put up a fence, check with your state's laws and your council's rules first. 

Yes, this is highly recommended. Setting the posts of an iron fence in concrete gives each of them a solid base. When placed on concrete, the posts of your iron fence are less likely to lean like the Tower of Pisa over time. Even one errant post can lead to many costly problems down the line, as you may have to uproot your entire fence to fix the issue.

There are a few ways to maintain your iron fence and extend its lifespan. It's recommended you hire someone to trim unruly vines or plants that wrap around your fence, as these can remove its protective powder coat. Avoid intentionally wetting your iron fence when sprinkling your lawn and move sprinklers away. Sand off any rust spots and cover the sanded area with a coat of paint. You can also hire someone to paint the entire fence.

As long as you have your local council's approval, you don't have to inform your neighbours if you're putting up a fence. Still, it can be a good practice to give your neighbour common courtesy and let them know. If you inform them and don't object to it, you have a defence if they dispute your fence in the future.   

On average, it can take two to three days to install an iron fence. That's due to the one to two days needed to let the concrete on each post dry. Another day or two is required for attaching the rails and the gate. Expect the service to take more time if your iron fence spans a large perimeter. You can ask your Tasker for an estimate of how long the job will take.

Only if you have the experience, the right tools and equipment and know exactly how to put up a fence (iron or whatnot) that complies with all your state's regulations, building codes and safety standards. If your installation fails any requirements, it can be more expensive to fix the fence to make it compliant or remove the entire fence and start over.

In general, fences must not be higher than 1.8 metres. If it's built from masonry, it can't exceed 1.2 metres in height. If it's along the boundary of a primary or secondary road, your fence is limited to a maximum height of 1.2 metres. When planning to put up a fence, check with your state's laws and your council's rules first. 

What do iron fencing services include?

Iron fencing service includes all the tasks necessary to do an expert iron fence installation on your property. This service can handle common types of iron fence installations, such as rod iron fence installation and wrought iron fence installation. Your hired iron fence installer can take measurements, mark off spots for post placement, dig the needed holes, install the posts, rails and gate.

Taking measurements

Before your hired wrought iron fence contractors install your fence, prepare the necessary permits. Some Taskers can procure these for you upon request. Once the permits are ready and you have your council's approval, your Tasker takes measurements. They can mark the exact spots for post-placement and help you choose the right location for gate placement as well.

Note that the site must be clear of any obstructions or debris. However, you may want to consider hiring another expert to clear these before work begins. After you've approved their plan for each post and the gate position, they can go to the next step.

Preparing tools and materials

If you don't have the iron fence yet, some Taskers can buy it for you upon request. They can make sure to have all the appropriate tools for the job and get the needed materials. Should there be any excess materials left over after the project, your Tasker can turn these over to you.

Digging holes for posts

With all the materials and tools ready, your Tasker starts digging the holes. They can dig as many holes as needed for all the posts and make sure they are deep enough and uniform, so the posts are level.

Installing posts

After each hole is dug, your Tasker places a post. They can attach a plumb line to ensure that all the posts are level and of the correct height once they're in their holes. Your Tasker can make the necessary adjustments if they aren't level. 

Your Tasker can fill each hole ¾ of its depth with concrete to stabilise each post. Depending on the weather and how it affects the concrete mixture, this can dry after a day or two.

Attaching rails 

After the concrete is dry and the posts are firmly in place, your Tasker attaches the rails to each post. Depending on the iron fence design, they can connect the rails with brackets or do spot welding. Your Tasker can make sure the rails are of the right length and cut them to size if necessary. They can also ensure that the rails have a consistent level of ground clearance.

Installing the gate

Your Tasker can install the gate, and if the iron fence has a drop-down bolt, they can bore a hole on the ground and attach the drop-down bolt gate. With your fence finished, why not hire someone to help you get the most out of your lawn

Recent Iron Fencing tasks

Environmental Sediment Control - Supply and Install silt Fence

$100

Boolaroo NSW, Australia

18th Aug 2022

Supply and Install Silt Fence around Construction Site approx 70 to 100 meters. - Due date: Flexible

Replacement and repair of section galv. iron fence

$5,000

Seaview Downs SA, Australia

18th Jul 2022

Replace galv iron fence sheets and possible retaining wal work - Due date: Flexible

Wrought iron remote control gate to be installed

$8,000

Sandy Bay TAS, Australia

29th Jun 2022

double drive way. Wrought iron remote control gates to be installed - Due date: Flexible

Need to build the brick fence with iron grill

$2,000

Melbourne VIC, Australia

23rd May 2022

I have brick boundary which I want to heighten up with some brick and need to put iron grill in between. Need some quotes.

Replace a collapsing few panels with some iron ones to keep my dog in

$1,000

Sellicks Hill SA 5174, Australia

15th Mar 2022

Exchange collapsing wooden ones with iron. Approx 3 to 4 panels. - Due date: Needs to be done on Monday, 21 March 2022

Front wrought iron fence and gates painted

$1,500

Ruse NSW, Australia

22nd Feb 2022

Would like a quote to paint our front wrought iron fence ad gates .. Dulux colour Ironstone to match our new roof… Kind Regards Kim - Due date: Flexible

Fence repair - brick & iron

$1,500

Virginia SA 5120, Australia

18th Jan 2022

Looking for bricklayer/ handyman. Am looking quotes for our insurance company on a small fence repair - for fencing in a courtyard damaged by a falling tree: we need people with references/testimonials who can issue a tax invoice. Part of the fence is brick, and part is corrugated iron (3 panels). We would hope to somehow be able to re-use undamaged bricks (if possible) and also have 60 spares. Ideally we would love someone who could fix both at the same time but, if not, the brick fence is our priority and the budget ($1500) is for this portion. Corrugated iron fence portion an extra payment - to be negotiated. We will ofcourse pay for materials (brick, piping, corrugated iron) separately to these budgets as required. This app does not enable me to say this, but we would like the job done as soon as possible (rather than on 24 Jan specifically) whenever tte weather permits. We are fairly flexible on days and times - can be done during the week or on the weekend, by prior arrangement when we are here.

Fix wrought iron gate to the wall so that gates align

$100

Westleigh NSW, Australia

20th Jul 2022

We need the right side wrought iron gate fixed to the wall. When the right and left hand gates align together there is a 90 ml gap between the rhs gate top bolts and the wall and a 80 ml between the rhs gate bottom bolts and the wall. See photos - Due date: Flexible

Michael did a great job of fixing the gates, particularly as it was a harder task than first appeared. Many thanks

Wrought iron gates

$10

Balwyn North VIC, Australia

11th Jul 2022

Need quotes on two sliding gates and front entrance gate - Due date: Flexible

Installing a low iron gate to brick fence

$300

Ashfield NSW 2131, Australia

24th Jun 2022

We need help installing a low iron gate (we have got the gate, see picture) to a low brick fence. Please quote installation including necessary hinges, bolts. Gate is about 10kgs, with the diameter around 3cm on the side for the hinges. Many thanks! - Due date: Flexible

HANDYMAN-REPAIR POSTS ON OLD CORRUGATED IRON

$5

Windsor VIC, Australia

18th May 2022

I need a Handyman or Fencer for small job to install some new metal posts in ground to support old posts and support present corrugated iron fence into upright position with a custom made wooden lattice privacy screen attached to it that extends 1-1 1/2 metres above the iron fence. A written quote is required to give to the neighbour to pay their half of the fencing repair job.

Colorbond fencing ironstone color

$10

Perth, Western Australia, Australia

3rd Mar 2022

Require 7 panels of colorbond fencing in ironstone color traditional profile core drilled on top of limestone blocks. Please see drawing for layout. 2 panels to cover the gap and join it with existing asbestos fence. Height required 1800 mm. Ironstone color, traditional profile. Supply and install quote

A 6 metre corrugated iron fence replaced with paling. 2 posts replaced

$750

Flemington VIC 3031, Australia

14th Feb 2022

Acorrifated iron fence needs to be-replaced with palings. 2 uprights may need replacing. It’s between two houses. - Due date: Needs to be done on Monday, 14th Feb 2022

Wrought iron fence repair, paint removal

$500

Paddington NSW, Australia

23rd Aug 2022

We need some rusted sections of wrought iron fence repaired - cut out and new sections welded. We also require old paint to be removed from fence in preparation for rust proofing/painting. - Due date: Flexible

Build brick and iron fence

$999

Gillieston Heights NSW, Australia

19th Jul 2022

Build perimeter fence and remote control gates with brick and metal/iron fencing. - Due date: Flexible

Wrought iron gate

$3,000

Monash ACT 2904, Australia

2nd Jul 2022

I would like to have a customised, ornate, wrought iron gate made to fit a gap 123cm wide and 178cm high.

Repair a damaged wrought iron fence (older style)

$1,000

Green Valley NSW 2168, Australia

4th Jun 2022

part of my fence was damaged due to a negligent driver. the whole fence is about 15ms long but the damaged part is only maybe 6ms of the whole fence. 2 panels have been knocked over, one panel just needs to be propped up again but the 2nd panel needs to be replaced. the property is sold and the settlement date is 8th June 2022 so hoping someone could come fix it ASAP before the settlement date! - Due date: Before Thursday, 8th June 2022 or sometime close to the date

Digging up sheet iron used as veggie garden bed

$200

Malvern East VIC 3145, Australia

16th Mar 2022

Random. I know. I need 6 sheets of sheet metal dug up which is about 3 foot into the ground.

Excellent work! Did it super quick.

Replace post for cast iron fence and unfreeze gate

$250

Norwood SA, Australia

22nd Feb 2022

Cast iron driveway gate post is rotted and needs replacing. Cast iron gate is "frozen" so can't be opened. - Due date: Flexible

Absolutely brilliant! He arrived on time, communicated well, was tidy and lovely. Most importantly he knew what to do and finished the job efficiently and what I wanted. Would highly recommend.

Design & construction of brick and wrought iron fence

$5,000

Maiden Gully VIC, Australia

5th Feb 2022

Looking for quotes for the design and construction/ organisation of a brick and wrought iron fence for the front of new house being built. - Due date: Before Thursday, 4th Aug 2022