Find experienced local fencing contractors in Hamilton

Replacing a timber fence. The fence is approx 9 m long by 2 m high with neighbour friendly pailing.

Anyone who has installed an electric possum fence No because I hoping you know more about this and can advise me - Due date: Flexible

We'd like assistance with a retaining wall and timber fence. Our property is higher than the neighbouring property (towards the rear of our yards). The length of the fence is 42.4 in total. 28m needs a 200mm high retaining wall, 14.4m needs a 600mm high retaining wall. Scope: 1. Remove existing fence and retaining wall 2. Supply and fit new galvanised steel posts in ground to hold new retaining wall sleepers (need a quote for both concrete and hardwood sleepers so we can understand the difference in price) 3. Double the amount of posts set in ground on sleeper joists and mid way 4. Set new 100 x 100 hardwood posts in ground and connect to sleepers 5. Supply and fit new fence rails and palings 6. Put earth back into place on uphill property behind retaining wall. Kindly only please quote if you have licenses and insurance in place. - Due date: Flexible

I need a brick fence 1.8 m long to be constructed. It will include two brick columns at either end. Columns to be finished with corbel tops. Columns to be 350mm x 350mm and approx. 1.6m high. The infill panel between the posts to be of single skin brick approx. 1.3m high. I would like the two columns to be core filled and the completed fence to be lightly bagged. The job consists of approx. 300 bricks. All bricks supplied. They are solid clay commons (nubrik). I also have GP cement, concrete blend and brickies loam. I also have a 135L cement mixer if required. Also a concrete footing has already be prepared for the job. - Due date: Flexible

Timber garden gate has rotted at join. Needs a new piece of timber, repair, repaint and reinstate - Due date: Flexible

Need 9 fence panels repair and painted on my neighbours side of the fence would have to remove clothes line to repair fence. - Due date: Needs to be done on Monday, 31 October 2022

Would like someone to come out this weekend ideally, or alternatively during next week (but we will be at work). We have a front fence and need to install a mailbox in the fence. We have not purchased the mailbox yet and would need some guidance on making sure we purchase the right one for the front fence. The fence is not timber, it is more of a plastic feel (not entirely sure of the material). I have included an image of the front fence where we would need the mailbox installed. - Due date: Needs to be done on Saturday, 7 May 2022

Need a steel fixer to fix all steel For a pool - needs to have experience

I have some pre-fabricated timber panels which I need secured to prevent a puppy getting into the garden. I also need a retractable hose to be mounted to a brick wall. The timber panels may need to be cut to fit the required space.

Need fence pailings installed onto metal gate ASAP. I have the pailings ready to go just need someone with the right tools to do it please. Need this done urgently!

We are looking for someone to repair our wooden fence to make our backyard secure for a new puppy. There is a small section that needs a new fence installed and other sections that need repair. This job will require a site visit to quote. - Due date: Before Thursday, 10th Feb 2022

Install aluminum pool gate and side fencing. Total measurements 1.6m - Due date: Flexible

I have a handful of fence pailings which require to be reinstated. The rails are only slightly rotten & I don’t think they require replacing at this stage - may just need longer nails to secure. I have additional pailings if required, but no other tools or nails

Our pool fence is being replaced. The old one is being taken down on 14th September, new one to go in on 17th September. In the interim, 12 poolside tiles (stone) in which previous pool fence posts were sunk need to be removed and new ones fitted for new fence spigots.

Need to three new toughened 12mm frameless glass panels with black hardware to match existing. First panel approx size is 1m wide x 1.45m high. The other two panels need to fill in an area of 2.65m wide and the same height of 1.45m high.

Our sliding gate has moved and the gears are rubbing on the gate when it moves. It needs adjustment and then the gate re-calibrated. It is a Neoslider gate. Our gate company can’t come until next week but we really need someone today if possible. Thurs Dec 10

Colorbond fence for backyard.