Find a fence installation professional in Brisbane

The gravity latch on our side gate is really stiff and only closes if you slam it. Not sure what’s causing it. We’d also be open to installing something more secure or dog-proof if that’s a better option. Looking for someone handy with gates or fencing to take a look and fix.

Hey 👋😊. So tomorrow I need a wire fence built outside the front it is just a temporary fence I have everything you need wood stumps, dog wire fence, zip tyes - the only thing I don’t have is a hammer which you will need to put the wood into the ground I have managed to get one in but had enough trying to get the rest in pretty sure a guy needs to do it hahahaha 🤣. There is only 6 to be put in the ground plus I have pegs that need to be put in to hold the fence in place! Seriously need help please thanks 🙏.

Supply and install some bolts to timber deck: 1. Photo 1 where one bolt is missing 2. Photo 2 one extra bolt on each corner (left and right side) to stengthen timber frame to steel post (may need to create hole). Maybe one or two extra bolts if needed.

Replace temporary fence with a 1800mm high wooden or cyclone fence with swinging gate.

Seeking a fencing handyman to replace ageing timber inset panels with Metzag Colourbond panels at a residential property in Hendra, QLD 4011. The scope of works involves the removal and disposal of twelve existing timber panels, each set within a brick boundary fence. Replacement panels are to be Metzag Colourbond in Ironstone finish, measuring approximately 2 metres wide by 0.5 metres high to match the current look. The handyman will be required to supply all materials, including Metzag Colourbond panels, top, bottom and side rails, and necessary fixings. Each panel must be securely installed with rails fastened to the brick boundary fence, providing stability and rigidity. It is essential that all panels are fitted level and flush with the brickwork for a neat, professional result. Works to be undertaken include site preparation, precise measurement and cutting of panels as needed, removal of the old timber panels, installation of new panels and rails, and thorough clean-up of the site upon completion.

Flexible on height and swinging/ folding, but need to ensure car can be parked beside it without being hit. PVC fence on one side and steel post on the other

Frameless glass pool fencing up to 18-20m. Need work done in mid November

Build and install fence rail for single side of stair case to match other side Height 960mm and length 3500mm

Looking for a fence contractor to replace my old fence with a new wooden fence It is 8m long Job in East Brisbane 4169 Price for inspection only

Measure and quiet and install 5 panels and a glass gate to span 6.5 metres of glass Balustrading on verandah. Ground floor unit easy access.

Paling fence needs repairing/replacing + sourcing and installing electrical opener.

Quote to build a fence. If the price sounds ok I’ll need a written quote for body corp approval. Fence 3.1m by 2m high from patio to retaining wall then 1.6m by 1.18m high above the retaining wall (which is 82cm high). The top of the fence will go straight across. One pic shows what it needs to look like to match other fences on site. The other pics show the actual site

Install 2 steel posts, connected to gates (one automated one not)to replace existing wooden posts in an easily accessible driveway in Spring Hill. Must be reliable and punctual. Please see photos attached.

Hi, We are a property management team managing a residential property in Bulimba that requires new timber boundary fencing. The owner is after a simple, standard timber fence—nothing fancy, just solid and durable. What to include in your quote: - Please break down the Purple side (40.4m). - Include labour, materials, old fence removal, and GST – all clearly itemised. Important: -If need to inspect the property physically, please contact and we can arrange. Please provide a full written breakdown of costs. Attachments: - You’ll find fence line measurements and site photos attached for reference. Location: - Bulimba, QLD. Looking forward to receiving your quotes – thank you!

We require a carpenter to attach Delaco Wall Panels to existing Fence. 16m long and 2.2 m high. Client to supply panels.

Looking for a quote to remove wooden back fence and replace with new wooden fence New wooden fence to be 1.8m high Land is approx 10m wide

Approx 45 metres of replacing fence, timber fence there currently, want to replace with colourbond

Please provide quote for pool fence. Semi Framed and Framed - price for both 12m x 1.2m ss pigots 10mm or 12 mm one gate completely flat site onto pool tiles We supply glass panels etc - just need installation thanks

Hello! I need a fence to keep my dogs safe. The fence doesn’t need to be pretty, just sturdy. There is pre-existing fence (metal picket and wire fence) on one side, and I need the new fence to connect across the bottom of the block (flattish) and on the slope to the retaining wall. Diagram in the photo attached My block is sloping and overgrown. Access is via stairs / down the slope - materials will need to be carried in unless we apply for access to the track at the bottom. I suggest a visit to confirm the quote so we are both on the same page re costs.

Damaged the fence and need just the one piece replaced. It’s a very simple straightforward job. Pls place offers