Find a fence installation professional in West Melbourne

Looking to get a new a cream colour bond swing gate supplied and installed, metal posts are already there. Just need the sides and the gate itself. Looking to install electric openers as well.

supply and install panel fence (between stone pillars). I have attached photo of actual fence and a photo of similar to what i am looking for. Please send me your quote. No time wasters please i need this done ASAP. Thanks

Need a partner for fencing installation

10.5 Mtr * 2.1 mtr height Supply and install of Backyard fence including removal and disposal of existing.

Replace damaged colourbond panels

Pool Fence Installation Enquiry I need a pool fence installed with the following specifications: Distance from the edge of the concrete to the fence line: 3m Distance from the house to the edge: 3.5m Fence required: 3.5m x 3m, L-shaped configuration Fence height: 1.5m One gate/door of standard measurements Purpose: to create an enclosed area for a dog. Please provide a quote inclusive of all parts and labour.

Hey guys i have 2 fences between me and my neighbours that need taken down and install a mew fence with all rubbish taken away

I would like to have an access gate installed in the fence at the back of my house.

Needing carpenter or handy man who can source or tell me type of side gate to get and install it to temporary fencing for security to be able to essily.open and close Its currently like this as you can see not the best security.

Looking for someone to inspect our driveway gate. The current gate is old and we’d like advice on the best option. Either: * repair the existing gate, or * replace it with a stronger, more secure gate. Happy to consider steel or aluminium depending on cost. Please provide recommendations and quote for labour and materials.

Hi, I need someone to remove my existing timber fence and install a new Colorbond fence. Materials supplied by us: * 4 × Colorbond Standard Fence Panels (2400 × 1800mm) * 8 × 2400mm Channel Posts * 8 × 2400mm Rails * 1 × 930 × 1800mm Single Gate * Gate frame, gate posts, rails, infill sheets and screws * All Colorbond fencing materials are on site and ready for installation. Job required: * Remove and dispose of existing timber fence. * Install approximately 12m of 1800mm high Colorbond fence (L-shape: 8m + 4m). * Install one 930mm pedestrian gate. * Some panels will need to be cut to suit the layout. * Please supply concrete and any additional installation consumables. * Ensure the gate is aligned and operates smoothly. * Clean up the site after completion.

* Relocate the existing galvanised steel garden gate, approximately 1,850 mm high × 950 mm wide. * Reposition the gate approximately 15–20 mm from the hinge side to allow clearance for the metal privacy angles. * Install two 1,000 mm lengths of 40 × 40 mm galvanised equal angle to the existing brick pier. * Position the angles to provide privacy along the latch side while allowing the gate to move freely during seasonal and weather-related movement. * Install the gate lock to the gate and brick pier. * Check and adjust the gate alignment to ensure it opens, closes and locks smoothly. Please note: The galvanised angles and gate lock will be supplied on-site.

We have a 3m gap in our back fence that needs building. We would also like a 1-1.2m gate there. There are 2 posts (one steel, one timber) already in, so it just needs the pailing (plus gate post). The piece of wood on the ground is just sitting there (can easily move it).

Color bond fence post snapped off below ground level, I've obtained a new post, just need someone to remove old post from fence and install new post including digging the hole.

I need to install 4 fence extensions on my shared fence .Each extension is 1.8 m long.

12M slat fence. 6 posts. Includes 3m sliding gate and 1m entry gate. 1.6m in height. Need installed and assembled. Some holes alreay half dug due to the extraction of previous fence. Materials list attached in images also

Need a side gate installed. This is the current way it is and need a gate like this. The older one needs to be moved / removed

Require a colour-bond side gate to be installed. Dimensions are approximately 1200mm W by 1600-1800mm H

Our gate is broken and now needs to be lifted up to shut properly. All three hinges need to be replaced in new positions and welded on as they are all rusted

I need a swing gate opener installed. It is solar powered. I have all brand new parts and manual.