Find a fence installation professional in Wheelers Hill

Replace timber fence which is leaning onto neighbour's property - Due date: Flexible

the wooden fence between properties is in need of replacing. there is foilage such as tree ferns on one side which i do not want removed. other side is concrete, one side is a lot of plants. some could be removed if necessary. please be prepared to come give us a quote and discuss with neighbour to as to how much is to be replaced.

Arched design sliding gates and fence panels with spears, using mostly 40mm x 40mm tubing and 40mm x 80mm for the bottom of the gates Requirements: * 2 Gates each 3150mm x 1050mm with welded angle line across the width of the gates to connect to a block upright position * 1 Entry gate 1030mm x 1050mm * 2 Fence panels 3350mm x 620mm * 1 Fence panel 800mm x 612mm * 2 additional bolt on to concrete post 1100mm x 100mm for the block systems * 1 Stand alone post 612mm x 100mm - Finishing: High quality Black powder coating - Installation of gates and fence panels: Included - Motors, Tracks, racks, wheels and rollers: Supplied by owner PLEASE SEND ME PHOTOS OF PREVIOUS ARCHED GATES & FENCES WORKS COMPLETED BY YOU.

Black powder coated arched gates and fence panels with spears Requirements: 2 gates each 3150mm x 1050mm with welded angle line across the width of the gates plus spears 1 Gate 1030mm x 1050mm plus spears 2 Fence panels 3350mm x 620mm plus spears 1 Fence panel 800mm x 612mm plus spears 2 additional post 1100mm x 100mm for roller systems 1 Stand alone post 612mm x 100mm Colour: Powder coated black Installation of gates and fence panels: Included Motors, Tracks, racks, wheels and rollers: Supplied by owner

Demolish, remove & dispose of old existing fencing. Clean up rubbish & removal at end of works. Supply & install new treated pine fence 8.8m + 6.4m. Hardwood posts (to be set with cement stabilisers). 1800m treated pine railings 75x50mm treated pine rails 150x25mm treated pine plinth board Prepare existing boundary fences each side of new garage. Supply and install new steel Colorbond 30.5m fencing on one side 1800mm high panels (set with full concrete footings) 50 sq intermediate posts exposed with 140mm colorbond plinth underneath Framing with colour profile Note tree stumps will be removed prior to start. Site plan + job instructions can be emailed for further detail if required Required in approx 2 weeks No budget figure yet

Old fence is broken after strong wind. Around 2m height X 20m length. Please send me quotation for replacing work, including everything like removal, material supply and labor, etc. Cheers

Please provide a quote for the following: 1) removal and disposal of the old fence 2) installation of the new Colorbond fence with or without the supply of materials (approx 20 meters) Site visit is appreciated prior to providing the quote.

We are looking to get a quote for Aluminium blade Installation of fence approx 16m in length and 1.3m high. The location is Mulgrave VIC 3170

A tree root has lifted 2m X 2m approx section of our driveway so need to remove the concrete, cut three root off and replace the concrete.

In my carport, there is a wood that is rotten . This will have to replaced by a new timber and also painted in dark brown along with a gutter that just runs on top of the wood. The wood length should be 2 meter and the width is about 1 A4 sheet page.

Hi, Looking to replace an approx. 8m long timber fence (2.1m tall). Take away existing fence. Flexible on days but need it replaced at the earliest. Thank you

Need fence replaced. Paling fence. Timber 1.8m high. 38meters length. Can cost (as an option) to dispose of old fence or leave on site.

Looking to get a new timber fence. 33.6m in length (2 neighbours involved). Want a written quote so I can show neighbours.

Fence screening to be installed on the side of the fence with posts

Build a pool fence as previously discussed

Need to get wooden fencing done in whelllers hill . Approximately 35 meters. This is to replace the old fencing Cheers Ryan