Find a fence installation professional in West Melbourne

To install privacy fence

Our gate is broken and now needs to be lifted up to shut properly. All three hinges need to be replaced / repaired/ reattached.

I am wanting a pedestrian gate installed. Would like it to be black aluminium style or wooden. It’s about 1m wide gap between the brick wall and the timber fence. Example photos attached of style - open to height whether low about 1m or up to 1.8M tall. Hoping to find out easiest way to do this and quotes. Thanks

I need side yard fence installed that can be opened. Only one side required. I have attached a photo of the side fence on the other side for reference, need same done that opens. I have also attached photo of the plan. The red circle is the fence needs to be installed. Measurements are also there.

Remove and dispose of old fence. Replace with aluminium/color bond picket fence(no gate) 12 metres long/standard 1.2 metres height.

I need to get a side fence replaced with a gate. Attaching a sample gate I would like to get. Would prefer a double side gate for better access. Would also like the exiting fence taken off the property. Dimensions: 3m wide and 1.8m high

To install the fence panel and door of total width 133cm and height 190cm, colorbond to match the exisiting fence. Please see the example photo below

Hi, I’m looking for an experienced handyman or fencing contractor to install a side gate at my property. Details: • Location: Truganina / Olivia Estate • Type: Standard side gate for backyard access • Width: Approx. 1m (flexible – open to measurement by you) • Height: Standard (around 1.8m preferred for privacy) • Material: Timber • Cypress Post 125mm x 75mm x 2.7m. • Ground: Concrete What I need: • Site inspection (if required) • Full installation (including posts, hinges, latch/lock) Timing: Flexible, but sooner preferred 💰 Budget Please provide a quote (open to offers) ✅ Requirements • Experience with fencing/gate installation • Own tools

I am looking for an experienced fencer or fabricator to remove an existing timber fence/gate section and install a high-quality Colorbond double gate. This is for a primary driveway access to park a heavy rigid truck, so the installation must be "heavy-duty." Scope of Work: • Demolition: Remove and dispose of the existing timber gate and small fence section (approx. 4.2m total width). • Post Installation: Install two heavy-duty galvanized steel posts (100mm x 100mm or equivalent) on each side. These must be set deep in high-strength concrete to support the weight of large 2.1m gates without sagging. • Gate Installation: Supply and install a Colorbond Double Gate (approx. 4.2m total opening). • Hardware: Must include a heavy-duty latch/lock system and drop bolts (to secure the gates into the ground when closed). • Finish: All materials must be supplied by the contractor. Color to be confirmed (likely Woodland Grey or similar to match standard VIC fencing). Requirements: • Previous experience with wide-span driveway gates is essential. • Must provide all tools, including a concrete mixer/auger for deep post holes. • Please provide photos of previous Colorbond gate installations. Location: Tarneit, VIC Budget: Please provide an all-inclusive quote for labor and materials.

Remove 16 metres of timber fencing and install 16 metres of colourbond fencing

Description: Looking for someone experienced to install a secure barrier or gate Purpose: • Block customer access from workshop floor to front entry/stairs leading upstairs • Create a clear separation between customer area and work area • Must still allow easy access for workers ⸻ Scope of Work: • Install gate / barrier / partition (open to best practical solution) • Approx width: 2400mm • Must include a door opening or access point for workers (pedestrian access) • Needs to be secure, functional, and safe for daily use ⸻ Looking for someone who: • Has experience with gates, fencing, or workshop partitions • Can supply materials or work with supplied materials • Has own tools and can install securely ⸻ Timing: Flexible – ideally within 1–2 weeks. Quote me

Repair 8 fence panels and install a bottom sleeper/plinth to act as a retaining barrier, preventing soil erosion under the fence.

Wooden post to be installed on existing fence I will supply post and concrete

Removal of front fence and partial return. Replace with a modern fence.

Title: Install small privacy screen / fence extension to block neighbour window Description: We are looking for someone experienced with fencing, carpentry, or outdoor installations to design and install a neat privacy solution on top of our existing timber backyard fence. The goal is to block direct sightlines from our neighbour’s raised window into our yard. Scope: • Install a privacy screen or fence extension on top of the existing timber fence • Only needs to cover a small section of the fence (approximately the width between the rainwater tank and the small tree – see photo) • It should not extend past the tree on the right-hand side • Estimated additional height above fence: ~400–600mm (open to advice) We are open to different solutions such as: • timber slat fence topper • framed lattice or similar • other tidy/custom options that could also include hiding the hot water system Requirements: • Measure and recommend an appropriate solution • Supply materials • Install securely to the fence • Must look neat and integrated (not temporary shade cloth etc.) Please include in your offer: • examples/photos of similar work if available Location: Footscray Photo attached showing the fence section and neighbour window we want screened.

Replace this gate latch. Gate latch will be supplied.

Old gate needs to be removed and a nrw colorbond door with latch and lock needs to be installed. Photo of current door attached. Offer needs to include supply of new door too.

Install concrete plinth for 2x mailboxes Contractor to supply all materials for concrete plinth I will supply the mailboxes and anchor bolts - please see attached Allow 2 days for concrete to cure before retuning to install the mailboxes Contractor Photo of mailboxes attached Dimensions for concrete plinth approximately 1m x 0.5m x 20cm

Supply and install of 1.8m high timber paling fence. (Contractor to supply ALL materials required). Approximately 10 lineal meters to be installed on soil. Approximately 5 lineal meters to be installed on concrete slab. 1.2m wide pedestrian gate.

We have an existing 17m wooden fence which is falling down. I need someone to remove (and dispose of) that fence and install a new Colourbond fence (also 17m). I've bought the fence already, but will need you to supply concrete etc for the posts