Find a fence installation professional in Sunshine Coast

4 timber fence posts to be replaced Timber replaced running along the top fence line. I have all new timber posts , bags of concrete for posts. New timber to run along fence line. Some cutting of timber may be required.

Replace single fence paling attached by galvanised nails to a metal gate frame and re-attach latch for gate locking mechanism. Paling is 173cm high. Cut paling to match top and bottom line of fence and handle circle. Check gate locking mechanism working after replacement.

Hi, Wondering if anyone could install a colour bond fence roughly 26 meters. Must have experience. We have all materials.

Timber deck needs sanding and staining. Stain will be provided. Timber deck has screws not nails. Bamboo will need to taken down and new panels (I will have here ready to install) And timber in between bamboo needs to sanded and stained.

Side gate has one hinge broken. Needs repair or replacement

Hi, we’re looking for someone to do a fence at our property in Banya, Sunshine Coast. The approximate measurements are: • Back: 10 metres • Two sides: 14 metres each One side neighbour is happy to arrange their own fence, so we only need fencing for the back and the 1 side sections. We’re after a standard/typical residential fence. Could you please provide us with a quote, including materials and installation? Thank you.

Require supply and installation of a side timber fence with a gate. Fence would be approximately 2.3m long and will need to extend to the property boundary fence (through garden bed) Needs to be installed any day from 2 - 4 September

There's about a dozen fence palings that have been destroyed by kids kicking a soccer ball against them. Need someone to replace them and also better secure the existing palings. Price indicated is a placeholder, please send me a quote.

Hi guys, needing 30 steel posts installed on to front of concrete block wall. I will be on site in the morning to mark them out for you. I will provide posts and m12 masonry screws Require: White card Steel caps Hi vis

Need to replace a timber gate in a fence. Gate is pine framing, ply sheet backing. Needs to be painted to match too (need to colour match)

We require an automatic gate opener for the existing double swing gate. Each side is 2m x 1.8. Electrical is in the ground per the pic

Supply & Install Colorbond Fence Panels to Fill Gap (Match Existing Green/Grey) Looking for a fencer to supply and install Colorbond fencing to close a gap between two existing fence runs in my backyard. Scope of Work: - Install post(s) and Colorbond paneling to bridge the gap completely. - Connect securely to the existing fence posts/retaining structure. Color / Style Matching: - Caulfield Green / Wilderness / Cottage Green (or equivalent standard green profile). - Posts/Trim/Top Rails: Slate Grey / Woodland Grey / Monument (dark grey framing). - Standard vertical corrugated metal profile (approx. 1.8m height to match existing). - Approximate gap length is 2.2 meters. Site Conditions: - Easy access directly in the back garden. - Concrete footing edge/base exists along parts of the boundary line. Tasker to Provide: - All necessary tools, materials, posts, rails, panels, and concrete/fasteners. - Clean-up and disposal of any waste generated.

fence needs repair temporarily or replacement

Fence Is not doing too well- needs to be stabilised Looking to replace -Task Is for making it safe and presentable

14 meters of wooden fence installation on a slope on the sides of the property 17 meters of 1.8*1.8 aluminum panels installation on a relatively flat surface No old fence in place. We will he supplying the wooden and aluminum panels only.

As previous, replace 190m of 6 foot treated pine paling fence, 30% of posts likely need replacing.

I have a residential gate in Coolum Beach where the rusted hinges have failed. I'd like to repair the gate with stainless steel hinges.

I need about 5.9 lineal metres of s/s wire balustrade installed/fitted. I can supply all the materials. To be fixed into steel RHS posts. 1 @ 3.5 wide and 1 @ 2.4m width. x 900 high. Would need to have experience with this system preferably.

Install approx 5.5m of flat top panel fence 90 cm high Install 2m x 1m x 0.3m gabion cages with stones / boulders Remove and dispose of unwanted bushes

Install aluminium balustrade inc. collection from Bunnings We need someone to collect and install an aluminium balustrade. Materials purchased by us upfront — you will not be out of pocket at any point. What you need to do: - Collect ProtectorAl aluminium fencing components from Bunnings (we will purchase and arrange) - Install on site: 2800mm straight run + 1000mm return at 90°, mounted to top of masonry wall (approx measurements). - 4 flanged posts dynabolted to masonry, 3 panel sections (2 panels cut to size between pickets) Tools required: hammer drill + 10mm masonry bit, angle grinder or hacksaw for cutting aluminium, level, basic hand tools. Materials: Purchased by us upfront Please check the photos before quoting.