Find a fence installation professional in South West Sydney

Need fence replaced. And gate. Run is 6m

Looking for an experienced fencing installer to install approximately 50 linear metres of 2.1m high Colorbond fencing, across three separate sides of a residential property. Scope of Works: • Set out fence lines and post locations. • Excavate post holes to the required depth and spacing. • Install, align and concrete fence posts, ensuring they are plumb and level. • Allow concrete to set/cure before installing fence panels. • Return to site to install Colorbond rails, sheets and capping. • Ensure all fencing is straight, level, securely installed and professionally finished. • Clean up work areas and remove installation debris. Materials: All fencing materials, including Colorbond sheets, posts, rails, capping and concrete, will be supplied by me. Installer to provide all necessary labour, tools and equipment, including post-hole digging equipment. Requirements: • Previous experience installing Colorbond fencing. • Ability to complete the works over multiple visits to allow for concrete curing. • Good workmanship and attention to detail. • Provide an estimated timeframe for completion. Please quote for labour and equipment only. When responding, please confirm your fencing experience, availability and total installation price for the 50m.

Looking for someone experienced in fencing installation to enclose my existing outdoor patio area to prevent my dogs from accessing it. I’m wanting black aluminium vertical-bar fencing, similar to the ProtectorAl pool and garden fencing available at Bunnings. Approximate measurements: * Between existing metal support pillars: 3.4 metres * From metal support pillar to house wall: 2.9 metres * Approximately 6.3 metres per set of sections Work required: * Install fencing between the existing metal patio support pillars. * Install fencing between the pillars and the side of the house. * Install a matching black aluminium gate to allow access between the patio and garden. * Fencing approximately 1.2 metres high. * Ensure minimal gaps underneath and around the fencing to prevent dogs getting through. * Gate to have a secure latch, preferably self-closing. * All fencing to be securely fixed and professionally installed. The purpose is simply to keep the dogs out of the patio while maintaining an open appearance. Happy to use the Bunnings ProtectorAl range or something equivalent. Looking for someone who can supply all materials and complete the installation. Photos attached showing the patio and preferred fencing style. Please provide a quote for materials and labour.

Supply and install chain link fence 1.2m high around 10m long with one gate.Bottom and top rail aswell.Fence is for front yard

Colour bond fence post needs replacing with steel post as fence is swaying outwards

Install 4x swivel pins on my pool fence so I can turn on the pool heater easily.

Supply and Install the colour bond fencing retains walls side gate

Need 5 alumninium fence toppers attached. Bought them from stratco. Just back fence. Have permissoon from the neighbour. If you look up https://www.stratco.com.au/au/fencing--screening/colorbond-steel-fencing--gates/good-neighbour-fencing/good-neighbour-fencing-toppers--extensions/good-neighbour-screen-top-slats-black-3-pack-sc-10056/ Also note alumnium slats are 2.4m stock so need to be cut few cms off angle . 3 slats for each part

I need to replace gate motor with sensor

We currently have a very heavy and cumbersome gate on our deck made from the Merbau timber that the deck is made from. I would like it replaced with a light gate that is not opaque and that you can see through to the other side. Perhaps aluminum in colour? Open to suggestions of what will look better.

Need to supply and install missing fence panel . Same pattern : Color Surfmist

I’m looking for a Male with a Ute, preferably someone strong who can assist with picking up fence panels from my father in laws - and bringing them to mine where you can help to install them. Half a day job - minimum 4 hours

I’ve just moved into a rental and the side fence is slatted and I need it covered as my dog barks at everything in sight

I will supply everything we need, but I need the offence pull down and or I need certain panels replaced. I’m not quite sure. Yeah so if you if anyone’s out there to do it, please let me know.

Hi, I've got 2 side that needs fences, can you give me an offer with installation prices? one side is only 90cm in width, other side is 127cm wide. If you can do this job, I might have another job in Smithfield doing similar work. come in with a good price and you can have both jobs. cheers :)

Looking for an experienced fencing/gate installer to supply and install a pedestrian side gate at my house in Oran Park NSW. The gate is required on the side of the house near the bin storage area. Landscaping plan is attached for reference. Requirements: * Supply and install a good-quality outdoor side gate * Prefer aluminium/slat-style gate in a colour matching the existing fencing/house * Approximately 1.8 m high * Gate/return fencing to be positioned minimum 2 m behind the main building line, as shown on the attached landscape plan * Must not be a Colorbond metal-panel gate * Include posts/frame, hinges, latch/lock and all fixings * Installation should be level, secure and professionally finished * Please remove any installation waste Please include in your offer: * Gate/material cost * Labour * Approximate gate width you recommend after measuring onsite Location: Oran Park NSW

Fence is done but requires gates on both sides of the building

Need approx 20m pool fencing installed (1.2m high) for the front of the home. 20m fencing will include 1m pedestrian gate and 3m swing open vehicle gate, remaining 16m will be fixed. I can supply materials Please quote

Fense gate with post ti install