Find a fence installation professional in SA

I’d like someone who is an experienced handy man to build an outdoor fence (2m height) approx 3/4m long. It can be bamboo with concrete footings and timber posts. It’s probably half a day to a days work…

I need 4 fence extensions installed but one needs to be cut

Build a 22 metre long timber fence for my backyard I will supply materials

Replace back fence with good neighbour 1.8 meter high , 21 meters long

Shopping Centre, Adelaide, needs repair. It's a black steel concertina gate on a wheeled base frame that folds back against the wall when we're open. One swivel caster is badly worn and broken, so the gate doesn't roll smoothly or lock in place properly. The other wheels also look worn, and the corner of the base frame near the wall appears damaged, so it may need a quick check or minor welding. I need new heavy-duty swivel casters with brakes fitted, and the gate tested to make sure it rolls and locks securely. Photos are attached

Need old timber and good neighbour fencing removed and replaced with new pool-compliant good neighbour fencing. Approx 20 metres. 1.8m high. To be completed within 2 weeks.

remove side fence. Supply materials Install new gate.

The fence section is 11 Metres long.

would like a welder to weld brackets for fence on the retaining wall post.Tget are 19 retaining wall posts.If possible also quote for fence 33 meters or separately

Replace the old fence panels with new fence panels. We have the new panels here now. Easy access, and the job is ready to do now. No tools or fasteners will be supplied.

I have a lattice fence around my pool. One panel was removed as was not in a good state. Need a new piece sourced and installed.

Unscrew existing good neighbour fence (2 sections) Remove rotted sleepers Replace with concrete sleepers Relay damp proof course barrier Re assemble fence Note that one bottom rail of 1 section of fence is welded to existing fence post, will need to cut to dismantle fence and allow sleeper to slide down, then re weld after

I want to install colorbond side gate. The total width is 2 meter so need single side gate and may require a panel.

Hello! I need 6 t-posts installed. Just need to go into dirt for trellis. You will need to bring sledge hammer or post driver. No holes to be dug. Also need wire run between posts (total of . Wires). You will need wire cutters/pliers. Should be simple...I just dont have the tools or the upper body strength.

Replace 16 lineal metres and internal gate made of brush, with Good Neighbour style fence and gate with lock

Pull down a old fence and replace with new fence pluse post

I require a part of my fence to be installed with the posts as well I have everything you need to install it.

Install Screenline Fence extensions for Colorbond fences (Standard Fence Extension Kit) to my existing Colourbond fence. Extension is 300mm and fence is 22m in length. I already have the kit, all I need is to have it installed.

Supply and install 15 meter colour bond fence

Hi I need a small fence piece installed to cover this gap it’s monument fence approximately 400mm wide