Find a fence installation professional in Noarlunga

Build a 22 metre long timber fence for my backyard I will supply materials

Need old timber and good neighbour fencing removed and replaced with new pool-compliant good neighbour fencing. Approx 20 metres. 1.8m high. To be completed within 2 weeks.

Hello! I need 6 t-posts installed. Just need to go into dirt for trellis. You will need to bring sledge hammer or post driver. No holes to be dug. Also need wire run between posts (total of . Wires). You will need wire cutters/pliers. Should be simple...I just dont have the tools or the upper body strength.

- Drop bolt installation - New gate latch hardware purchased today - Lockable latch installation onto colourbond fence gate

Glass pool gate hinges need adjustment or replacing (one gate closes too fast and the other does not close at all)

I am installing a rabbit fence around our property boundary. I need someone to dig a 30cm deep mini trench around our property (approx. 250M), to bury our 1.2m high cage mesh. This cage mesh then needs to be attached to our wooden boundary fence. There is also a section of collapsed wooden fence to remove. The property is sloped down front to back.

Install fence post. Should be a days work.

Replace hinge on driveway gate.

needs quote done on replacing a fence at the back of the. property between houses. good neighbour fencing please plus replacing a side gate at the same time. Calling for QUOTES you need to go out to do this not google or remotely. Have not photos due to tenant property. need done as soon as possible . Will also have other work on other properties. prices will depend on quote

Need to replace broken panels of colourbond fencing, approx 2 metres asap

We are looking for someone to supply and install a new gate/fence between the side of our house. I’ve attached an ai image of something we had in mind. We are open to options and ideas. The space is approximately 3m wide and we want something that is about 1.6m tall. There is an image of how it currently looks as well. Something lightweight and not wood is our preference due to living in the hills.

Require 40m each side of good neighbour fencing, 1.8m high and woodland grey in colour. Slight slope from path to house and then flat for remained 32m

Hi I need a small fence piece installed to cover this gap it’s monument fence approximately 400mm wide

Pics of either side of the house, one is sloped. Front, about 3m for driveway gate, 1.8, one side and about 10m other in bush. Install a front and/or side fences. Side fences to start.

Install Steel Blade Fence, 2 Panels and 3 Posts with letterbox. Also, cement footing. Length or width 475m

Need to replace fence panels

Assistance required for a new colorbond fencing installation over a 30meter brick wall. Some posts already in place. Will help with installation

Have replacement gate motor to replace existing broken motor

I need a picket fence put up to replace the old metal one (pictured, it has since been removed). I haven’t sourced supplies. It's about 3m wide. I am hoping for a fence that stops my dog from jumping up and over/blocks a bit of the street view. There has been a Colourbond fence installed to the left and it can join onto the brick of the house. Pavers underneath go to dirt so I don't imagine it being a tricky job.

80 black outdoor panels to to be installed and mounted to our neighbouring fence in the pool area. 32,000mm length x 2,200mm height, a solid mounted track will be required and can be purchased from Bunnings and mounted directly to the current fence posts for ease of installation. It will need to be fixed so it's solid construction and not flex or bow in wind. Specifications: DIMENSIONS AND DETAILS (1 panel comes in 2 pcs) Panel (mm): H2900 x W400 x D25 Panel Coverage (m²): 1.16 Slats per panel: 8 Panel Weight (kg): 17 Composition: WPC The actual panel width is 420mm with 400mm usable space and 20mm overlap. The panels will need to be cut down to 2.2m height from 2.9m. There are 2 concrete planter boxes in the pool area that you will need to cut around. I'm flexible on install date, so during the weekend or on the weekend, however I'm looking to have this completed by the end of Feb if possible. The panel have been delivered to our house already and are currently in the garage ready for install. I have installation guide via way of PDF, but also looking for someone with experience.