Find a fence installation professional in West Brisbane

Remove about 35 metres of wire fence and install timber fence. Rubbish removal too.

Removal of old gates. Put up two new posts and install new aluminium gates on the driveway about one metre behind the old one. The driveway is about 2.6 metre wide and the new gate would be 1.8 m high. One side is attached to the house, the other post need to be fastened on the concrete driveway near the fence.

We have an existing gate and fencing panel that need to be completely replaced due to wear and tear. We are looking for like for like replacement in same setting and would like this to be lockable from the inside. There is a tree currently in the corner that is pushing some of the panels out of place so need some advice around location of fence line with that there. We have a dog so needs to be down to ground level as per existing. Not concerned about repainting in the blue as outdated, but timber will need to be treated please in clear finish. Access is good up side of house you can park on driveway and is about 15 metres up side of house. Dimensions are approx 2.1m width by 1.6m height. Price in removal of old timber after job complete.

1800mm Wide x 2000mm High Fence panel with horizontal slates. A how to video is here: https://youtu.be/rT6lo-xMW2g One post to be screwed into pavers and through to the concrete below the pavers. Second post to be screwed into brick wall. I think you will need to supply long screws for the pavers and brick (I can’t see that these have been included.

Looking for a carpenter/ fencer to remove dbl gate across driveway and return boundary fencing back on either side of driveway to the garage. Fence profile to match existing ~1500 high picket timber fence. LHS 7400L RHS 6100L 2x 900 swing gates needed either side for the paths. All measurements to be confirmed with a site visit. Materials including gate hardware to be included in price. Fence painting not required. Disposal of old gates not required.

*Quote negotiable Aluminium Fence & Sliding Gate Installation I have purchased approx. 20.3m aluminium fencing and a 5m sliding driveway gate online (low voltage motor included – I have my own electrician for the power connection). Looking for an experienced fence installer with own tools and equipment. Quote must include labour and concrete. Please refer to the attached order summary and drawings for details. The job will be completed in two stages: Stage 1: • Install all posts (please check drawings carefully) • Assist with final measurements before panels are manufactured Stage 2: • Install fence panels • Install 5m sliding gate • Install pedestrian gate Please only make an offer if you have prior experience installing aluminium fencing and sliding gates. Kindly include: • Photos of similar completed jobs • Confirmation you can install sliding gate tracks and ensure proper alignment • Your availability and estimated timeframe

Colorbond fence install. Completed by 8 march.

I need a 20m side wooden fence to be installed at my house. House is on a slight slope. I will remove the existing fence & trees. I will be supplying all timber, concrete. You will need to dig fence holes and install fence.

Looking for gate expert to supply and install two new side gates for our house

I would like to install a remote entry gate

Current post to be detached from fence. Gate closer to be removed. Post base to be removed. surrounded by concrete. New post to be cemented in. Post will be supplied. Fence and closers re-attached.

Remove and replace rotten timber garden fence post

Hi folks, looking to get two sections of PVC fencing done, both with a semi-private 1.5m PVC style fence. Here are some more scope information: - One section is 9m long inc. a 1m gate - One section is up an embankment, and is approximately 8m inc. a gate. - Both have relatively easy access - I’m happy to dispose of both old fences once removed.

We want to build a new gate to closely match the old gate. We like the old gate however it is rotting. We need the builder to install the new gate and it needs lock installed and hinge installed for self closing. Can use existing lock (in photo). Price needs to include all other materials. Gate is 1980x900 and need same height size to fit.

Polaris Hinges are not self closing. They require adjustment repair or replacement

Supply and install 2 x aluminium pool gates (approx 1300mm length) and install 2 small sections of fence panel (approx 900mm) to the back of the property fence line.

Install and/or supply new wooden fence Length ~60m (approx) Remove rubbish

I would like to find someone that can build me a custom good quality baby gate that opens from the middle for the top of my stairs. Details can be discussed

I need a fencing panel installed to close a gap in my fence. Previously there were banana trees in the gap but the trees have now been removed and there is a gap around 4m wide. I think it will need a single post installed in the centre to support the rails. I am looking for a standard paling fence.

The entrance gate to my front yard has a post that is broken. I need it to be replaced with any additional hinges and screews required. I will pay for the materials (reimbursed to the person's that will do the work). This task is for labour only.