Find a fence installation professional in West Brisbane

Supply and install pool gate. Dimension is 950 wide, 1200 height

1 . Dig 5 x post holes approximately 700mm deep 2. Install 5 - 50mm x 50mm x 2.4mt Galv fence posts (concreted into the ground) 3. Bolt 5 x fence posts to existing timber fence (once concrete is set) 3 days later 4. Posts to be installed on the opposite side of fence shown in the image attached. 5. All materials and tools supplied for the job

Side gates both sides of the house - 1x double gate and 1x single gate

Hi there, Need a small fence installed approx 1.4m and side gate installed 1.85m. Happy to use Rapid fence products from Bunnings.

Fence installer needed for Hercules Metal fence in our back yard.Materials already supplied 61 meters, easy access budget for entire Job $1200 (estimated time 2-3 days) Labourer will be provided to assist with work

Supply and install outdoor handrails down our concrete steps. Connected to wall where green rails are... There is also another 1-2 meters of arena whch requires a fence

Install an black aluminium pool fence 10m wide - straight line - with one gate Must comply to regulations so will pass pool approval from certifier Builder to provide materials for the job

Looking to get kopper log posts installed on top of existing fence. I will provide all posts. Total length of fence line is 100m -image attached of log on top of our fence and then an picture of how we would like secured

Build a new wooden fence

1. Install 1.8m high Timber fence good neighbour style (pailing overlap) Around 35lm - straight run 100x75 Posts to be fixed to concrete sleeper bracket - already installed All treated pine I’ll supply timber posts, rails and pailings, you supply galvanised fixings 2. Install 17lm of 1.8m high pailing with rails behind - good neighbour style (pailing overlap) install over existing fence - straight run To win the job, the trades actually doing the job needs to turn up to site prior to commencing Thanks Dave

1) Wooden gate has a loose plank and latch. We cannot close the gate. 2. The glass of a single swing pool gate has smashed (taken out). The fitting remain. We have fence off the gaps but cannot access the pool to clean, etc.

Fence Works Required – Back Boundary Looking for someone to complete fencing works along the back of my yard. The back boundary is made up of two different fences: • Section 1: Remove and replace existing fence (backed by a retaining wall). • Section 2: Install fence panels on my side only to cover and improve the appearance of an older fence (neighbour does not wish to replace at this stage).

Substantial job with approximately 20 to 40 fence railings needing replacement.

Install a new fence between the posts pictured. Cut a hole in the slat panel and install gate. Must supply materials and tools.

100+ meters of fencing to be done at a property in Westlake looking for reliable fencing contractor to take on some work fencing work around Brisbane Offer starting at $45 p/m…

Install a 3 rail pvc fence - approx 10m

Need someome to replace already existing 7 timber posts of the fence. Fence pannels can be removed before taking the posts off and reattached to new posts. New posts are steel and will be supplied. Plus if you can remove the old posts and concrete.

I am looking for a TrendWall ModularWalls installer to complete an installation that includes a gate. All materials are already on site and ready to go. The wall needs to be installed on top of the retaining wall, adjacent to the pool area. Please see the attached photos for reference. You must have experince with this systems. 27 lm long with the gate.

Timber fencing needs replacement. Timber already purchased and onsite. 110 linear metres. Flexible with timing. Existing fence needs removal and disposal.

Help to dig 2-3 holes for pool fence posts and concreted in ground.