Find a fence installation professional in Hampton Park

Small Fencing for pensioner. Fence to be installed in between driveway two properties

Hi all, I need low cost non motorised wrought iron gate made and install, height around 1.6/1.8m high and total width is 3m. It will require to be measured. Post are already installed as there was one there previously. Open to suggestions as looking for cheapest option.

Approximately 60m fence all around the house also removal of old fence 1.8 m high timber fence

I want to have a fence of approximately 1.8 to 2 m height to have some privacy. Please find photo of existing fence . End to end length is approx 5 meters. Appreciate a quote containing material costs, labour, paint etc. Gate and brick part should be of same height as rest of fence.

The front gate to the property needs to be repaired so that it closes properly. Thinking about a sliding gate which is safer - at the moment its hinged. Need it done asap

New fence required approx 6 metres long. The fence separates the backyard from the front yard. The current one is falling apart. See Pic attached. Needed to be done urgently.

Need someone to build a picket fence. Someone with prior experience and can show some of their work.

I would like a quote to install a front metal fence to a property in Hampton Park. The fence shall include a motorized gate, and a small pedestrian access gate. Possibly the existing letter box needs to be removed and replaced. The frontage is about 19.2 meter wide and the fence is to be 1.3 meter high. I need the prices of two basic fence patterns, one with a round top and one with spike (arrows) top that comes with a circle under the a spike as in the pictures.

I have picket fence around 900mm high at my property in Hampton Park Victoria . It has one open end to walk through in and out . I would like a safety gate to be installed for safety of the kids . There is an existing post might need another post on other side or the house wall can be used as a stopper all depends on the swing of the gate . The gate will be approx 1300 mm long and 1050 mm high . Regards

Make a chicken coop outdoors

Hi There, I require someone to install a wing kit which comes with my toolbox. Boxes are installed just need wings kit installed to suit my18 isuzu ute. Materials supplied. Labour charge only. Regards RJ

Need quotes for fence 15.6 m X 2m height with removing the old fence. How much would be total installed

Install side fence and gate ( 4 meters total length)

Supply & install colour bond front fence Install 2 doors metal gate

cut 2 sections of back fence away and also one post and replace the existing post and fence after a caravan is removed. Back yard faces a level sports oval in Hampton Park, so there is easy access and no neighbours permission required. first do open it up and come back when it needs to be put back. fine to support external horizontal beams with horizontal wood brace.

3 rotten posts need to be replaced. Pl see pictures.

Approx 36 mts of fence ...require quote for timber and colourbond... I have click on $5 ...as I do not know what to expect.

Need a timber paling fence built. 1 Gate access Height 1800 Run approx 50M Potentially need another 60M done depending on the current job.

16m fence 1.9 mtres high only need one more person as im able to do most wrk... Must have a abn aswell if u have a ute or trailer xtra will be added on pay rate

would like quotes from certified fencers to replace this fence