Find a fence installation professional in South West Perth

Looking for an experienced fencing installer to complete a small boundary fence installation out front of our new house. What I already have: • 5 steel fence panels (2200mm x 1200mm) • 1 Bunnings gate What I need from you: • Inspect/assess and tell me what additional materials are required (posts, post caps, post mix, brackets, screws, hinges, etc.) • I will purchase all extra materials • Once materials are onsite, install the 5 panels and gate to a professional standard • Cut panels to fit if required • Ensure posts are straight, aligned and secure • Hang gate correctly with proper clearances and smooth operation Requirements: • Demonstrated fencing installation experience • Must bring all tools (grinder, drill, post hole tools, level, etc.) • Attention to detail

Remove temporary panels nailed in, they will be easy to remove with a hammer. Install a fence panel 100mm wide and 200mm tall, colourbond. It is to sit between a post and boundary fence, see pic 1. Pic 2 is the post, pic 3 the ground and pic 4 is the colourbond colour and other side.

Replace outdated bamboo fence sheets About 1.8m x 3m x 7 sheets I'll get the sheets from Bunnings. Everything else is provided by yourself. Location Beaconsfield

supply and install colourbond fence circa 28m + 15m + 25m

Hi everyone! Trying to gather up some quotes to build a colour bond fence along the yellow lines in this image provided. Fence to run from the side of the house, down the garden, sharp left along the brick low dividing wall and all the way to the other fence line. Brick wall sits about 35cm off the ground. Thank you, Andy

Looking to install 5x L-shaped Arbor posts from ground to house wall. Image of area and rough measurements added. Will want the posts to match surfmist or monument (TBD). Either steel or aluminium, whichever is more cost effective. Looking for minimum 90x90mm posts. I will then either be adding shade cloth or slates across (TBD). May also need this done too. I have added some example inspiration photos of what im looking to achieve.

Hi, I need allywall plinths: 5 plinths (2.4m) basilt colour 2 plinths - harvest or domain (cream colour)

We need a timber side gate custom built to fit the driveway. About 2m tall and 2.5m wide. Needs to be lockable from behind. Also needs a hole to put car charging cable through at times.

2x steel carport posts rusting at base. Remove (inc concrete footing) and supply and install new steel posts. Will require removal of existing concrete footings. Unsure of costs of materials so please propose your price.

I need a 3 metre pool gate and fence installed from either Stratco or Bunnings ASAP.

Having a pool installed late December. Needing some perforated fence and 2 gates put in. The gates and one panel would only be about 3 metres in length total.

I need to install a pool gate

I need a colour bond gate made and installed in a pre existing fence. Height is approx 1.8 m and gate needs to be 900-1000 wide. Needs to include posts hinges and latch

I need a retaining wall put infront of existing retaining wall that is three panels high and approx 12.5m long

Build a fence around veggie garden to stop dog digging holes! It is roughly 7m of fencing needed and no more than 1.5m high. Something super simple made of wood or pallets. Thanks

I need supply and install of approx 21.15m of 1800mm of colorbond and approx 15.5m of 1200mm colorbond with 600mm of 'Good Neighbour' extension put on as well.

I need a gate installation on the side of my house

1. Build part of a brick fence back up, roughly 3-5m 2. Bricks have been cleaned and footings already exist 3. Install pedestrian gate

2-3 meters of the fence and collapse and broken weather bond fence Z Needs fixing as well as laying some concrete to secure the perimeter of the border fence approximated 2 -3 length of the weather bond fence -approvingly 4-5 meters presume

Remove gate, remove existing post attached to wall, replace post attached to wall and reistate gate and ensure the gate is functioning correctly.