Find experienced local fencing contractors in Cromer NSW

We have an existing metal fence post that we need to be cemented back into the old hole in the garden after our garden renovation. Job requires tradie to bring concrete and line up the pole with the existing poles so that the fence can be put back up (this is job is not to put back up the old fence).

Old pool fence needs putting back up. One post needs concreting into ground as had come loose.

I need 2 Bunnings bamboo panels screwed to the existing fence. There is a little cutting required around the gate as per the picture. The 2 new panels are 1 metre wide.

Need to repair and replace part of damaged side boundary fence, about 12m. Main poles still in tact, need to replace horizontal frame and palings. Looking for quick and cheap job, full fence is going to replaced in a few years. Quote to include supplies, happy to use low cost timber. Disposal of existing fence not required.

Lapped and capped timber fence both sides of front yard, 9m L x 1.2m H east side and 4.5m L x 1.2m H + 2.2m L x 2.1m H west side. Plus a 900mm x 1.8m basic timber gate

Replace existing colorbond fence

I need 7 bamboo panels attached to the existing fence for added privacy. Please supply the neccesaary screws. There are 7 panels that need to be attached. See photos of the panels and also where it is going. Its around 6 meters worth

Have added photos of the wooden gate

Require replacement of a 5.3m length of metal pool fence. Standard metal fencing is fine. Needs to be 1.2m high to meet pool certification. Happy with standard black from Bunnings or similar.

I am after a quote to install 2 X 350 whirlybirds in my and my neighbours factory.

I need a side gate built to keep my dog in. Normal width side of house to be attached to brick wall or boundary fence. Must have self closing spring. Gate seen in picture is not attached and is rusting away.

Flexible with timing. 1. Need 4 screens attached to existing frame/lattice. The last post is damaged, So I need one timber post attached to the last screen. Potentially also lattice? 2. Build/install of new screen out the front standing in a small garden bed. Image #2 3. Potential side gate (Unlikely) - Due date: Flexible

We need some damaged fencing repaired URGENTLY. I have some of the original fencing, if it can be used but also open to new fencing being used. We need privacy back and for our neighbours too. Some photos are current and some Photos are immediately after the storm that caused damage can send more if needed from current day. Approx 6.5m long X 1.5m high - Due date: Flexible

I have a side gate in the style of lap and cap that has rotted and no longer closes. I am looking at replacing it exactly. Existing hinges and fastenings should be able to be re used. - Due date: Flexible

I need a new 1.8mm high boundary fence x 15 metres long built. It's the back boundary fence that sits behind a retaining wall. - Due date: Needs to be done on Friday, 21 April 2023

I need two new 1.8mm boundary fences built. I've had a swimming pool built and had a tree stump removed and now I need to have timber sleepers with a fence put on top for the back fence and a new side fence. - Due date: Flexible

Hello, We are looking for a professional to supply and install a new lap & cap fence on the left boundary of our property. There is currently a fence in place and we want to retain approx half of it. The fence we need to replace is approximately 20 lineal meters and is 2.1 metres high. We would also like 400mm high sleepers under the fence. Photo added of the current fence. We need this done by Friday the 4th of November. NOTE: I will also creating a new task for the full right boundary fence (50 lineal meters) if you are interested. - Due date: Before Friday, 4 November 2022

Hello, We are looking for a professional to supply and install a new lap & cap fence on the right boundary of our property. There is currently a fence in place that will ALL need to be removed as it has rotten away. The length of the fence is approximately 50 lineal meters and is 1.8 metres high. We would also like 400mm high sleepers under the fence. The fence will be highly accessible as we are clearing the small amount of vegetation that is currently there. We need this done by Friday the 4th of November. NOTE: I have created a task for the left boundary fence if you are interested. - Due date: Before Friday, 4 November 2022 - Due date: Before Friday, 4 November 2022

The bottom hinge/pivot is broken off my steel gate. I need this fixed so the gate closes easily. You will need to source the part for the gate. I will pay for the part, keep the receipt.