Find experienced local fencing contractors in Concord

The fence is blowing and needs to be fixed to the supporting side gate using roofing screws and close the side fence

The fence has fallen over on one side of the front of the house. This part has half of the gate of the driveway as well. I'm not sure whether this can be repaired or a new fence needs to be installed. Looking for advice and quotes. - Due date: Flexible

Fence is timber palings fence. One post at the rear needs to be replaced as well as some adjacent palings. - Due date: Flexible

Front fence, with electric gate required. Current Low brick fence present, needing additional height and addition of electric fence for car entry (which is unsecured no fence/ gate at the moment)

We settled a property recently and need to make the existing aluminum fence compliant. Need help determining the scope of work needed and the actual work.

Need new painted fence post and rehang the front gate . - Due date: Before Saturday, 31 December 2022

Need to install a new thin lock on a existing aluminium side gate.To make it work, need to: 1. Move the existing pole, attached top colorbond fence out by 1cm to close the gap between the pole and the existing gate for new lock to work. maybe add another piece of timber? 2.Drill and cut out the aluminium pole to install the locking mechanism, including the front hole for key opening 3. Drill an cut out the opening for locking latch on the gate side 4. Complete installation of lock by installing the front and back components - Due date: Flexible

replace bottom rail - existing one rotted out, prefer hardwood, palings would need nailing, slightly difficult to insert new rail. - Due date: Flexible

I previously requested this task in Feb but could not proceed as I was waiting for my neighbours' views. My back fence (timber) is 1.35m high from the ground level, we need to increase it to 1.8m. The brackets run across on my side of the fence, so I'm keen for someone insert new timber strips to the bracket running horizontally across the fence at the bottom (an extra at the bottom on the land level if you need to), and increase it to 1.8m from the ground level. Hedges will grow in front of them, so not too worried about the look. Checked with the neighbours, they're now fine with the fact that the new timber fence rising above will not be capped. The width of the back fence is 13.8m. Looking forward to your quotes. Many thanks - Due date: Before Thursday, 30 June 2022

Repair a wooden gate that is misaligned with gate post onto which it latches. Gate is now hitting post on its front edge and will not close. - Due date: Flexible

Install approx. 14metres of timber palings on the inside of an existing timber fence (have to increase height from 1.3m to 1.8m, on request of certifier, for recently installed pool). Posts already concreted to the ground. - Due date: Flexible

I would like a quotation for supply and install of a glass pool fence 9:3 and 2:3 having trouble loading photos - Due date: Flexible

remove exiting colorbond fence & replace with new colorbond fence - Due date: Flexible

Supply and install aluminium slat gate in monument colour with double side entry Size 1800 high 903wide. - Due date: Flexible

Need the surface prep for painting coat of undercoat 2 coats of weathershield paint I have the paint and undercoat, rollers and brush, sanding sheets Need this done over weekend or early next week.

Measurements are 3.2 x 1.8 metres colour ocean blue with a lattice top

To remove and dispose existing brick fence and footing New footing approx 500x400mm 32mpa concrete Trench mesh top and bottom 5bar - 12mm

A quote for a boundary fence replacement or repair AND also for a retaining wall repair.

Hi, we would like some quotes to install a modern picket fence and entry gate in front of our house. Approximately 12m.

Please come and check what is required to put up a boundary fence in colorbond. 2.1m x 15m.