20 Colorbond Fencing Services in Sydney

Hi pls give me a quote thank you

15metre long colorbond fencing to be installed. post concreted in and all materials supplied by contractor.

hi - I would like someone to attach colorbond to my 2 front gates and install a lock on them. I already have the colorbond (bought from Bunnings 1.8m high) but might need framing materials (iv e bought it before from Bunnings and Its about $14 per length). I would like the lock to be a key lock that works from both the inside and outside. Also, I want the gate to be low enough to prevent dogs from going under the gate - colorbond is to be attached on the outside of the gates

Require repair to a colourbond fence that has come off its support bolts/concrete due to storm and wind. Approx 6 metre section needs to be aligned and bolted or concrete into the ground, an additional metal supporting post may be required to ensure its strong and stable. The actual fence is structurally sound and does need repair. Easy access via rear lane entry. I will cover material costs (bolts, concrete, post etc)

I need a gate to be supplied and installed on the side of my house. Dimensions are 110cm wide and 130cm high

Hello, I’m looking for someone who can mount fake hedge trellises from Bunnings to our colorbond fence. There are 5 trellises in total to be mounted to create a seamless hedge wall. Many thanks! Sarah

Have a duplex, need 2 side gates between the house and existing Colourbond fence. Current width is approximately 850mm for both sides. Colour to be woodland grey. To include lock, posts, panel etc at 1.8m high

I need colour bond fencing supply and installation with a gate 3.5m × 3.5m length 1.8 hieght

Colorbond fence one Penel broken. Need to fix it

Job 1 - Need new colorbond fence installed approx 9m. Using 65mm x 65mm heavy duty galvanized posts. Timber at bass of colorbond. No gates Job 2 - other existing fence may need repairs “upon inspection” Job is Flexible What your estimated costs

I need addition of 1-2 panels and post plus repair to existing colourbond fence which has been bent by neighbour's plants pushing against it.

Supply and install. Width is approximately 2.7m, needs to be 1.8m high and lockable from front and back with a key. Colour terrain brown. Sandy soil.

Approx 6 metres of colour bond fencing to be covered by fake hedge screening. Hedging only supplied.

Hi, I am looking to replace my current wooden side gate with a Colorbond gate in the same colour. Looking for quotes for 1 side gate only, located in Petersham. Approx size is 1.45m wide by 2m height.

Require supply and installation of a colourbond side gate to replace the current timber one. Approximately 1 meter width and 1.7 meter height. The new gate is to be Cream in colour and to have a key locking mechanism.

i need a colorbond fence installed and have a budget of 75-80 per meter. i need approximately 15 meters ...

Old fence is timber, 30m long. It needs to be removed and we need new Colorbond fence to be installed. It is a boundary fence.

What was your quote for the gate at holsworthy? I didnt notice it expired Dimensions are about 110 wide and 150 high

Need somebody who can install Colorbond fencing - must have own tools - I can supply material - Approximately 60lm

12 metres and a gate supply and fix