Find a local brick fencing contractor in VIC

Hi there - I’m looking for someone to please remove the current letterbox in our brick fence and install this new one. Thank you!

patch and repair external brick fence paint (peeling paint) and apply new paint. Approx 15m of fence. Paint both sides.

Sloping front brick fence, exploring any options to fix/straighten

Provide a quote for building a small brick fence and with inbuilt letter box

Demolish brick fence on two sides of the block prior to house construction begins. You will remove the entire brick fence and take away demolished brick. Clean and tidy up the site. Please provide quote to get the whole job done. See attached the site photos.

PLEAEE SEE ATTACHED PHOTOS PLEASE QUOTE ALL INCLUSIVE PRICE. Cut and remove 2 sections of brick fence to allow vehicle crossover to connect to driveways. There are two sections of the fence to be cut and remove as follows: 1. Section 1 is half removed. You will remove the rest of the marked section then construct a brick pier on either side of the removed section of the fence. 2. Section 2 of the brick fence is very low. Remove the marked section of this fence. Then construct a brick pier on either side of the removed fence. Remove bricks from top part of the fence to make the maximal height to be 1.5m. You will bring and use your own equipment. The site must be cleaned up after you are done. Please quote only for the entire job and no hourly rate offer.

I have an existing brick fence that I would like to modify. The front fence up until the angle fence will stay and needs to be repaired and extended to the full height as per the highest tile on the east side of the fence. The fence which extend towards the house will need to be removed and the bricks can be used to extend the front fence height. The scope also includes to build a second double support at the edge of the fence where the current angle starts. The bricks that will be removed can be used for this one too Have a look at the photos and let me know if you have any questions before you bid. Thank you

Looking to remove my existing brick fence which is about 15m long. We need to install a new fence so the foundation of brick fence underneath needs to go as well. Job must include removal and disposal including any skip bin hire if required from tasker.

As before - brick fence to be built in Black Rock

Looking for an experienced bricklayer or fencing contractor for two jobs on my front brick fence: Cut a section out of the existing brick fence to create an opening for a pedestrian gate (gate not included – happy to discuss whether you can supply/install one, or I'll source separately). Fill in a gap at the end of the fence to match the existing brickwork. Looking for a clean, tidy finish that matches the existing brick and mortar as closely as possible. Please include: Relevant experience with brick fencing/gate installations Whether you can supply and hang the gate, or just prepare the opening Estimated timeframe and cost

Build a brick fence. Footing will already be in place. Piers need to be core filled.

Render repair of brick fence (front of property). Approx 1.5m height. One pillar has shifted and need rejoining/rendering to rest of brick fence.

Looking for an experienced bricklayer to build a front brick fence using orange bricks on existing concrete footings. Job Details: Total Length: ~15.15m (includes a 3.1m driveway gap) Columns: 6 columns, each 1.2m high Infill Walls: Single-brick width, 6 bricks high between columns Finishing: Brick columns to be capped with pavers Foundations: Existing footings ready to go Please supply your own tools and mortar. Let me know if your quote includes materials or labor only. Photos of previous work appreciated! Mock-up attached.

Fencing approx 28 meter length and 1.9 m high

Repair to a portion of a low front brick fence

I have broken the fence by using a crow bar to remove cracked concrete step, there was no movement on 1 side & a crack in the other so i removed all 80-100 brick that were loose & just wanting to relay bricks

Need bricklayer to repair damaged brick fence as per photos located in Niddrie.

Brick layer needed to fill in a 2x 1.5m wall where a glass window used to be And to cut a brick fence in two places (1.2m high and two bricks in width)

Demolish and removal of brick fence and associated footings at front of property. As per photos, the fence is in 3 sections with 2 x seperate columns and 1 x main section. Column 1 1780x360x360 Main Section high point - 1780 x 360 Low point - 1150 x 250 Total width - 3940 Column 2 1780x440x240 Cost to include removal of all debris, and leaving the area clean and filled to allow installation of new aluminium fence. Care required to avoid damage around nearby tap and footpath, and must have appropriate experience and insurances.

Rendering work needed for brick fence