Find a local console repairer in Sydney

I need three things done: 1. I have a hot water meter under my sink that is leaking from the connections to the pipe on both sides. I need these connections fixed so it stops leaking. 2. There are two taps that handle the mixing of the water that are also a bit leaky too so I need them either repaired or replaced. 3. I have a laundry sink that I never use. I would like someone to put blank caps on the two taps and the faucet so that I can put a fridge on top of the old sink.

2 taps and 2 wastes to be changed 450

Hi, we need someone to help paint several furniture cabinets and tabletops. We purchased some furniture, but there is a colour difference between the pieces. We would like them to be painted / refinished into the same colour so they look consistent and more presentable. The job includes: Checking the current furniture surface and material; Advising what type of paint / coating is suitable; Light sanding or surface preparation if needed; Painting cabinets and tabletops into a consistent colour; Making sure the finish looks neat, smooth and durable; Protecting the surrounding office area during the work. We can purchase the paint/materials if you advise what is needed, or you can supply them and include the material cost in your quote. Please let us know: Your availability; Labour cost estimate; Whether materials are included or separate; Whether you have experience with furniture painting / refinishing; Any similar work photos if available.

We need a wardrobe taken apart on bottom level and then taken up one flight of stairs and rebuilt as it won’t fit up the stairs without being taken apart.

Hi! I have new shower taps I need installed, as one of the old ones is broken and coming off. Needs to be finished before 9am, as water is connected to restaurant downstairs.

Need an experienced auto electrician to help install new electric side steps and canopy to my new Kgm Musso EV. Parts are on there way but could take up to 40 days to get here.

Small toilet,laundry,bathtub-change to mixer(Luna basin mixer;have plastic covers).2 showers-change taps(Luna lever wall top assembly).2 vanity-change to mixer (Luna basin mixer;sink cover chrome)

Looking for an experienced painter/handyman to complete a few small ceiling and wall touch-ups in Petersham. Scope of work: * Clean up and repaint scuff marks around multiple ceiling pendant lights * Patch and repaint one ceiling area with a visible gyprock hole (see photos) * Redo several (~3) wall paint touch-ups for a smoother, more even finish * Patch and paint over a few small holes * Minor crack touch-up Photos attached for full detail. Materials: * Wall paint provided * You’ll need to supply ceiling white paint and any patching materials Notes: * Looking for a neat, seamless finish * Should be straightforward for someone experienced * Please review photos and quote accordingly

Description: Looking for a licensed electrician to rewire two table lamps and ensure they are safely earthed. These are metal lamps and require proper earthing to the body. Scope of work: Rewire 2 x table lamps Add earth connection to lamp body Install new lampholders, cable, inline switch, and plug Test and confirm safe operation All hardware is supplied, including: Bakelite E14 Lampholder (Edison Light Globes) Black 10A Inline Switch 240V (Edison Light Globes) Fabric Covered Braided 3-Core Lighting Flex (Edison Light Globes) Black 3-Pin Side Entry 240V Plug Top (Edison Light Globes) Requirements: Must be a licensed electrician Location: Darlinghurst, NSW Timing: Flexible – ideally this weekend Let me know if you have any questions or need photos of the lamps beforehand.

I have a dripping tap in laundry and dripping shower head in the bathroom that both need fixing

Need a jumpstart now in surry hills please!

1. Build a palisade for the dog sport Mondoring. 2. Build a hurdle for the dog sport Mondoring. 3. Build the long jump for the dog sport mondioring. Mondioring Jump Measurements (FCI Standards): Hurdle (High Jump): Width: 1.5 meters wide. Height: Adjustable, ranging from 1.0m to 1.2m depending on the level (MR I, II, III). Structure: A movable panel, 60 cm high, topped with a turnstile or 3 bars. Level Requirements: 1.0m (Brevet/Level 1), 1.0m-1.1m (Level 2), 1.0m-1.2m (Level 3). Long Jump: Length: Adjustable from 3 meters to 4 meters. Width: 1.95m-2m. Structure: A frame of planks, starting at 10cm high in the front, Alloy sides or bands every 30cm. Palisade (Wall): Height: 1.7 meters to 2.3 meters, with a sloped descent on the back. Width: 1.5 meters to 1.9 meters. Structure: A vertical wall with wooden boards 10cm high and 27-30mm thick, with a slant for easy descent, supported by beams These 3 jumps we would like welded to the specific measurements according to the rule book.

Change taps in shower. I have bought the new taps

Replace 2 taps, 1 in bathroom and 1 in kitchen. New taps are provided. See attached for original and new taps.

Jumpstart car near pullman hotel - - Must have jump leads - familiar with jump starting another car and connecting to battery - and have a car of his own

Task 1: Leaking shower Shower taps are firmly closed, but water is still dripping from shower head. Fix and placement of the taps. I provide the new taps. Task 2: Leaking bathtub tap Fix and replacement of the bathtub taps, I provide the new taps

- Replace existing hot and cold shower taps with a single mixer tap - Install a water flow valve for a shower station - Potentially replacing pipes that need upgrading

Need - loose bath room taps fixed - Improved bathroom sink drainage also - toilet check

Safely and professionally. Must be certified/qualified. Scope of Works – Disconnections for Disposal 1. Safely disconnect and isolate the oven to allow for disposal. 2. Safely disconnect and isolate the gas cooktop to allow for disposal. 3. Disconnect and cap off the kitchen sink taps as required for removal. 4. Disconnect and cap off both bathroom sink taps to enable disposal of the cabinets.

We’re moving out of a rental after 8 years and are looking for an experienced painter and wall patcher / plasterer to help get the walls back to a good, presentable condition. There are various marks, small holes, dents, and scuffs across the house from general wear and tear, hanging items, and a dog (some scratching on doors). This is very much an end-of-lease tidy-up, not a full repaint. The job is for 8 hours total, focusing on getting as much done as possible in that time rather than aiming for perfection. Property details: • 3-bedroom house • House will be completely empty • Walls + some doors need attention What’s included / not included: • ✅ Paint will be supplied (matched and ready) • ✅ Drop sheets provided • ❌ You’ll need to bring your own tools (brushes, rollers, buckets, sanding tools, etc.) • I will patch what I can the day before so it has time to dry Timing: • Monday 2nd February • Ideally 9:00am – 5:00pm (or as close as possible) Important notes: • This job is based on time, not a fixed outcome • We understand that repairs and painting don’t always go perfectly from A → B • Photos of example damage will be attached to give a clear idea of the work involved Looking for someone reliable, efficient, and experienced with end-of-lease repairs.