Find a local console repairer in Sydney

I need to remove old and install new basin taps in the bathroom. Hardware provided.

Remove 2 stumps hay are remaining from trees and hoping for you to take stumps but can discuss. Need to chainsaw or somehow get out of the grown as wanting to resurface. Location is Mascot 2029

I have a trough sink 140cm to use in a photo minilab. I want it mounted, supply and install drain and tap hardware.

Dog Ramp Build Specification Assist a small/medium dog to safely ascend/descend a stairway (total of 4 steps) using a gradual ramp that extends into a hallway. 1. Dimensions Section Height (Fall) Run (Length) Step fall (heights) 4 x 17 cm Step run (length) 3 x 28 cm Total Height ~70 cm Total Run (stairs only) 112 cm You can extend the ramp beyond the 112 cm stair run into the hallway for a gentler incline. A total ramp length of 140–150 cm is ideal.

Stop water flowing into bowl. Remove broken buttons. - View all the details of this offer: https://www.airtasker.com/offers/01K876JEWNAKDZXH64SVBPRW17

I need a step cover made that is 800mm long x 350mm wide with a 100x100 square cut out with the back corner, 3x legs 200mm and another 650mm,

I need the old toilet pan (P-trap) removed and new pan installed in the same location. I need old taps and shower head removed and new shower taps and head installed. I need the bathtub taps removed and reinstalled with new taps. I will supply all new fixtures (pan, taps, head).

Looking for an experienced locksmith or handyman to install a Philips EasyKey DDL615 smart mortice lock on a timber front door. This is a retrofit job – the door currently has a DORMA mortice lock installed (photos attached). The new lock will use the same mortice cavity, but the front face holes will need to be enlarged slightly to fit the Philips lock template. Job details: • Door thickness: 40 mm (1.57 inches) • Backset: 60 mm (2.36 inches) • Door material: solid timber veneer • Current mortice: DORMA (standard Australian 60 mm backset) • New lock: Philips EasyKey DDL615 smart lock • Some minor chiselling or hole enlargement.

I have an upstairs bedroom (with outdoor porch/balcony) where I'd like to install an Aircon unit. I have purchased a Hyundai 2.6kW split Aircon system, ready for installation.

Hi, I’m looking for a licensed plumber to replace 4 taps total: 3 × basin taps (bathrooms) 1 × kitchen mixer tap All taps have hot and cold-water connections, and I already have the new taps ready to install. Details: Apartment is under 7 years old (modern plumbing). Straightforward replacements — no leaks or damage. Easy access under basins and kitchen sink. Please bring your own tools and plumbing tape. Photo 1: shows the new tap for bathroom Photo 2: shows the new tap and old one side by side, as a reference. Mirrors will be removed later.

Looking for someone to unlock the door of a front loading washing machine. I noticed just before I closed the door that the wash cycle had changed Manual https://commercial.appliancesonline.com.au/public/manuals/SWF7025EQWA-User-Manual.pdf

I need an experienced person (or team) to carefully dismantle and reassemble a 3-person Found Space sauna and move it literally next door — about 20 steps away. The job needs to be done ASAP. Here’s what’s involved (essentially the reverse of this video: YouTube link): https://www.youtube.com/watch?v=jgsmWnB5Xfc Steps: • Remove the glass door first (must be done before anything else) • Disconnect all cables from the control box that run through wall cavities • Unscrew the roof • Unscrew and remove front heaters • Lift off the roof • Remove the glass panels • Disassemble the bench and under-bench heaters • Unscrew and separate the back panel You’ll then need to reassemble it in the adjacent room, ensuring it’s level, stable, and the electrical components are correctly reconnected. Requirements: • Must have experience assembling or moving infrared or similar saunas • Must have your own tools and basic electrical understanding • Ability to handle glass safely This is a quick but delicate job — ideal for someone who’s handy with furniture or appliance assembly and available immediately.

I am moving out of my rented apartment and there is some damage to the walls where I hung pictures. There are two spots where the paint has come off, and two other walls where hooks have been removed and there are small holes from the nails in two other walls.

Replace cartridge in kitchem tap Two outside taps replaced Shower head replaced Remove water stoppier in bathroom sink Re fit a cartridge in kitchen - we have the cartridge We have the taps and shower head. Must be licensed plumber. Images supplied

I need a licensed plumber to remove old taps in two bathrooms and mixer tap in kitchen and replace with new tapware supplied by me (3 taps in total).

Need a painter to do a few touch ups around the office - minor things like scratches, and then a few skirting boards Location King Street Sydney CBD

Installation of heat lamps. This is for just one.

I bought new Modella Wall Top taps and would like to get them installed in my shower.

Newly installed carpet was not cut for the wardrobe door track. Now it’s cut, tack strips need installing to keep the carpet stretched. The strips are for concrete floors which I have. The wardrobe doors and tracks will be removed prior to your arrival so you just need to secure the tack strips to the concrete and pull the carpet onto them. Need someone with carpet installation experience who knows what they’re doing. Cheers!

We are looking for someone with specific skills. We have an Epson Surecolor P5360 Colour Printer. We also have some digital files that we need borderless printing Our goal by the end of the job is to have a template set up in Photoshop in the following size formats 1. A5 print on roll paper (multiple prints) 2. A4 print on A4 paper (borderless) 3. A3 Print on A3 paper (borderless) 4. A2 print on roll paper Right now we do not have the skills to be able to get the borderless printing complete. Your assistance is to come to our office, set the templates up, ensure the printer is printing borderless so we can frame the work. You are working with images that are created in 2:3 format so there needs to be some cutting off the images in the Photoshop template. Once complete the goal is we will have a working template in Photoshop and printer settings ready to Drag and drop images into.