Find local NBN electricians near you

I need an ACMA registered telecommunications civil contractor to replace blocked NBN lead-in conduit. Approximately 50 m conduit from NBN pit to house. Includes concrete cutting (approx. 2 m at house and excavation at street pit). Looking for quote at this stage only.

A conduit with NBN cabling runs from the ceiling above the entrance, down a wall, and a few metres across the living room floor (carpet). I am replacing the carpet with floorboards and need to remove the conduit so I can put a skirting board in. I want the NBN cable to terminate in a cupboard next to my entrance, instead. I have photos/videos.

NBN connection point - would like to move main point for the nbn connection to different room from current room - currently in main bedroom would like it in study room Open to offer Amount quoted not fixed

Require a cable to be installed from garage to middle of the house

Task Title: Pull old lead-in cable & leave drawstring in 20m underground NBN conduit (ACMA Registered)Job Description:Hi, I need a qualified technician to clear an underground telecommunications conduit path at my residential property in Downer to prepare it for an upcoming NBN installation.The Job Involves:Locating the customer-side conduit run at the house and the utility pole at the rear neighbour's property boundary.Pulling out an old, existing iiNet telecommunications lead-in cable currently sitting inside the conduit.Attaching and leaving behind a heavy-duty, compliant drawstring (blue/yellow poly rope) so the NBN technicians can easily pull their new fiber line through.The run is approximately 20 metres long and entirely underground.Requirements:You must be an ACMA Registered Cabler with Underground (U) competency endorsements to complete this legally.You must provide a signed TCA1 Compliance Form upon completion of the work.Please bring your own conduit tape, heavy-duty drawstring, and any necessary cable-pulling lubricant if the run is tight.Location: Downer, ACTBudget Recommendation: $100 - $150 (Offers welcome based on your experience and inclusion of materials)

Ducting to be placed for the NBN cable within the house going into the roof. 1.) he needs to drill and place the cable from that to the roof 2.) ducting should look good and also water proof

Require a phone socket installed for NBN connection

I need a licensed contractor to connect a property lead-in conduit to a nearby council/NBN telecommunications pit. ​Scope of Work: ​Connect a heavy-duty white P20 telecommunications conduit from the existing white conduit at my fence line down to the NBN pit (approx. distance 2-3m shown in attached photo). ​The route crosses under a standard concrete public footpath. Prefer a contractor capable of underground horizontal boring/tunneling to avoid cutting the concrete path. ​Run a polypropylene blue/white draw string through the entire length of the pipe into the pit. ​Ensure all underground sweeps maintain a minimum 300mm radius (no tight elbows). ​Requirements: ​Must hold ACMA Open Cabling Registration (with underground competencies) and be NBN eNable accredited to access the pit safely. ​Must handle any required local Council "Works within Road Reserve" permits/approvals if required for the footpath interface. ​Please provide a fixed-price quote inclusive of materials and labor.

Seeking someone to help us set up our Foxtel box and NBN box after moving to Richmond. The NBN has been connected to the property and we have all the required equipment. Ideally on Saturday 4 July or otherwise on the morning of Sunday 5 July.

Need an ACMA cabler or electrician to install about 15m length of internal NBN conduit pathway. The entry point is at the awning line on the outside wall. You will need to run 20mm white telecom conduit in the roof space, run it diagonally across the timber trusses under a terracotta tile roof, and drop it down into the Study room’s internal drywall where the NBN connection box will be located. Must secure the conduit to rafters to prevent sagging and use sweeping radius bends. Heavy-duty draw string must be left inside the conduit. Quote inclusive price (stating materials + labour costs).

Setting up CCTV cameras connection

i would like to install a power point and phone line in a wall shelf for an NBN PON and router. the photos below show where i need it installed - both power and the phone line are close so minimal chasing would be required

Looking to remove old phone outlets, security system wiring, sensors, and other unused cables, while locating and retaining the active internet/NBN line. Please message with availability and a quote.

I need to move a nbn out of bedroom into a Landry cupboard. Also need new power point added to cupboard. Need someone licensed.

Looking for an experienced handyman to complete several household jobs at one property. This job is part of SDA / Accessibility Compliance works so it’s important the repair meets appropriate safety and usability standards. Tasks include: • Move existing NBN box from garage to inside the house • Remove and relocate mailbox to new position 🛠️ Scope includes: 1. Relocate NBN Box - Disconnect and relocate existing NBN box from garage to an internal location within the home - Ensure cabling is neatly routed and secured - Confirm NBN connection and internet service remain operational after relocation - Patch/minor make-good works to old fixing points if required 2. Relocate Mailbox - Remove existing mailbox - Relocate and securely reinstall at new agreed position (per 1st photo) - Ensure mailbox is level, stable and properly fixed Notes: - Potential for ongoing work Please confirm in your offer: Your experience with similar repairs Repair works must be completed to a good standard as they are required for final compliance/inspection. Thanks in advance.

Looking for an experienced handyman / carpenter to complete several household jobs at one property. This job is part of SDA / Accessibility Compliance works so it’s important the repair meets appropriate safety and usability standards. Tasks include: • Move existing NBN box from garage to inside the house • Install flyscreen to rear sliding door • Install front entry door • Supply and install a bathroom door • Remove and relocate mailbox to new position 🛠️ Scope includes: 1. Relocate NBN Box - Disconnect and relocate existing NBN box from garage to an internal location within the home - Ensure cabling is neatly routed and secured - Confirm NBN connection and internet service remain operational after relocation - Patch/minor make-good works to old fixing points if required 2. Install Flyscreen to Rear Sliding Door - Measure rear sliding door opening - Supply and install suitable flyscreen/screen door - Ensure smooth sliding operation and secure fitting - Adjust rollers/latches if required 3. Install Front Entry Door - Review door in attached photo (3rd photo) - Supply and install front door as shown in 3rd photo. - Install hinges, handles, locks and required hardware - Ensure door opens/closes correctly and aligns properly within frame 4. Install Bathroom Door - Supply and install suitable bathroom door - Install hinges, handle and privacy latch if required - Trim/adjust door for correct fit and operation 5. Relocate Mailbox - Remove existing mailbox - Relocate and securely reinstall at new agreed position (per 6th photo) - Ensure mailbox is level, stable and properly fixed Notes: - Potential for ongoing work Please confirm in your offer: Your experience with similar repairs Repair works must be completed to a good standard as they are required for final compliance/inspection. Thanks in advance.

Need someone install a telephone port in our house, there currently isn’t one but there is a Telstra box installed outside. (Old Queenslander) this will involve running cable from the Telstra box and installing the new port for our NBN modem to be plugged into

I need a approx 20m trench dug for an NBN conduit to the house. Needs to be 400mm deep the whole way. Would be an easy job for someone with a trencher. Send me offers, not sure of costs.

hole in wall where my NBN cable comes out

The NBN cable does not have a proper cap on it, so the wire is exposed and comes out of the port easily. Please supply the proper cap and install on the cable, ensuring it plugs into the NBN port.