Find trusted local electricians in Hawthorn North

Looking for a licensed electrician to replace four fittings at a residential property in Melbourne: 2 wall sconces 1 ceiling light 1 ceiling fan (replacing light fixture) All fittings will be supplied by me. Existing wiring and wall switches are already in place, so no new electrical points are anticipated. Looking for a fixed-price quote for all four installations.

Oven just stopped working a while back. It’s the one on the top - the bottom one, same brand, is working just fine. it’s not the fuse box, need someone to take a look, see what’s wrong with it, if it’s the oven or the connection and remedy if possible

I have 12x down lights that need replacing with electricity friendly LEDs. Give me a quote - best one will get the job! :) Licensed electrician please

Qualified electrician needed to install attached pendant to existing wiring. See attached ceiling panel (wires tucked up). All parts provided. Standard ceiling height.

- Route electrical cables through ceiling for workstation x 2 - add 2 power points on wall

Looking for a licensed electrician for a few small electrical jobs around our café in Hawthorn. Jobs include: * Install around new power points in different areas of the café * Install a few light fittings/lamps in different areas * Replace some existing bulbs * Change some lights to LED The work is spread around the property. Please see the attached photos for the areas where the work is required. Please include your labour cost and any expected material costs in your offer. Licensed electrician required.

Run a new socket to other side of room max 4m

Three jobs: 1. Install two pendant lights underneath a balcony into existing light sockets. 2. Swap the locations of two ceiling fans (move the quieter one into a bedroom). 3. Fix pendant in bedroom (water damage from upstairs bathroom about 6 mths ago). All jobs on site in Hawthorn. Ceiling fans and pendants supplied.

Hello wanna connect of this 4powder board 10amp and wanna install 32a around 27m away from the board I removed all so wanna connection back And coffee machine of this also connect

Stack F&P heat pump dryer onto 10kg front loader + level washer Hawthorn, Melbourne. F&P 428122 stacking kit already fitted to the washer — the frame is on, this is the lift and final fixing. The complication: rear brackets can’t be accessed in position. The machines sit in a corner with a shelf overhead. Job needs to be assembled clear of the wall, then the assembled tower repositioned approx 300–400mm back. Two-person job. Levelling: washer needs to be checked and properly levelled with locknuts set before the dryer goes on. No second chance once it’s stacked. Floor is mixed tile and old vinyl, uneven and soft in places. Please bring: appliance glide pads or skates (machines are on rubber feet — they need to be shifted foot by foot, they don’t slide), spirit level, shifter, ratchet strap, and a right-angle drill attachment or stubby driver in case the rear fixings are tight. Rear clearance of at least 20mm must be maintained — heat pump dryer, has had a thermal-related repair. Suit appliance installers or removalists rather than general handyman.

We require a qualified, currently licensed A-Grade electrician to install and connect a large premium custom sculptural chandelier. Current A-Grade electrical licence/qualifications must be provided before assigning the task. CHANDELIER Canopy: 1500mm L × 600mm W Adjustable drop: 1150mm Stainless-steel ceiling canopy Multiple suspended hand-blown clear & amber/gold glass elements Integrated LED lighting 6 recessed spotlights in canopy 3000K warm white + RGB mode Dimmable 220–240V / 50Hz Flush ceiling-mounted installation Full technical drawings and specifications supplied. SCOPE Securely install chandelier and ceiling canopy Check ceiling fixing point and electrical supply Complete electrical connection Connect/test LED, RGB and integrated spotlights Level and correctly position canopy Assist with assembly/hanging of glass elements as required Test all functions on completion Installation must comply with Victorian/Australian electrical requirements Experience installing large, high-end or complex chandeliers is strongly preferred. Please provide your A-Grade licence details, relevant installation experience/photos and confirm whether you are available Tuesday or Wednesday next week.

Install 2 small wall lamps above our menu wall • Check the existing power point/electrical connection on the front façade and confirm it is suitable and safe to power our new signage • Provide/connect power for an illuminated circular café sign • Provide/connect power for illuminated individual letter signage on the front façade • Make any necessary electrical adjustments so the signage can be installed and connected safely We realised there is already an existing power connection near the signage area, so ideally we would like to use this if possible rather than install unnecessary new wiring.

Looking for a licensed electrician for 5 small jobs: 1. Power point – Install 1 new power point (wall is currently open – see photo). 2. Bathroom exhaust fans – Reinstall the exhaust fans in the ensuite and powder room that were removed during plastering (existing connections are available). 3. Infrared heater light – Install a new infrared heater light and connect the required switch. 4. Ceiling fan with light – Install a ceiling fan with light in the living room. Existing ceiling connection/wiring is available. 5. Light fittings – Replace the existing basic ceiling lights with new light fittings in 2 rooms (existing wiring/points). Also reconnect/terminate the existing light wiring in 1 bedroom where the light was removed during plastering. All areas are easily accessible – please see photos. Budget: $750 Hawthorn.

Looking to complete two installation jobs. Job 1: Artwork Hang 1x large artwork (125cm x 155cm, approx 10kg) onto an internal brick wall. It has 2x D-rings on the back (must hang directly on two screws, no wire). Job 2: Ceiling Hook Drill and install 1x hook into the ceiling to hang a plug-in light fixture. Physical installation only, no electrical wiring required. I am unsure what the ceiling is made of (could be plaster, concrete, or brick). Tasker to bring an electronic stud finder / multi-detector to check the ceiling and ensure you do not hit any electrical wires or pipes before drilling. Hardware: Tasker to supply all necessary hardware (or advise prior what needs to be purchased), including 2x heavy-duty masonry wall plugs/screws for the brick wall, and appropriate heavy-duty ceiling anchors (bring options for both hollow plasterboard and solid concrete/brick ceilings). Please bring a hammer drill, masonry bits, and a spirit level. I can assist with lifting the artwork into place.

Need down lights installed at our shop.

Need to relocate a light switch & move 3 power points ready for plasterer.

Floor lamp stopped working

A power socket has popped out of place and needs to be fixed. Should be a simple job for someone who has the skills

Licensed Electrician Needed – Certificate of Electrical Safety We need a fully licensed electrician to attend a residential townhouse in Hawthorn VIC and issue a Certificate of Electrical Safety. The townhouse has been vacant for over 12 months and the electricity retailer requires a Certificate of Electrical Safety before reconnecting the power. This is for a residential townhouse. Please confirm: • Your total price including certificate fees • Your earliest availability We are looking to have this completed urgently so electricity can be reconnected.

We need a new Power point installed about 5 m from The Switch box