Find experienced deck builders in WA

I’m looking for someone to install decking in my front courtyard, approximately 14m². I’ve already removed the existing pavers, so the area just needs to be levelled and prepared for decking installation. Looking for a quote for the ground preparation and installation only. Located in West Perth. Please let me know your availability and estimated cost.

Hi, I’m looking for a small, low-profile composite decking platform outside a new sliding door at my home in Treeby. The approximate size is 1800mm wide × 750mm deep. The existing ground is slightly uneven, so the platform would need to be properly supported and levelled. Could you please provide a quote for the subframe, composite decking, levelling and installation? I’m happy to send through photos if helpful. Thank you.

I'm looking for an experienced decking contractor/carpenter to supply and install approximately 20 m² of quality composite decking at my new home in Southern River. The exact final area can be confirmed during a site inspection. Rear Alfresco / Outdoor Area - Approximately 16–20 m² - Currently bare/unfinished ground — no existing paving - Main decking area is relatively level - A change in finished level is required toward the garage, including a properly constructed step/level transition - Deck to be neatly finished around the perimeter - I am also open to discussing a limestone-block perimeter around the rear deck as an alternative design. This is optional and can be priced separately if suitable. Front Porch - Smaller, separate decking area - Deck to finish approximately level with the front entry door - Deck extends toward and around the front of the house, including a recess around the planter - Deck terminates at the driveway with a properly framed/finished edge and a step/drop down to driveway level - No decking is required beyond the driveway Construction I am looking for a proper, durable low-level deck construction, including: - Appropriate concrete footings/supports - H4 treated pine structural subframe - Galvanised stirrups/brackets and suitable galvanised fixings - Composite decking boards with an appropriate concealed/approved fixing system - Properly constructed steps and level transitions - Neat fascia and edge finishing Decking Material I'm open to good-quality composite decking such as Ekodeck, ModWood, NewTechWood, Trex or an equivalent product. Please specify the exact product/range, colour and product warranty in your quote. If the colour selected affects the price, please indicate this separately. I'm interested in a good-quality, durable result rather than simply choosing the cheapest product. Site Conditions The property is a new build. Pest-control reticulation will be completed before the decking construction starts, so the decking contractor will be working after this installation is complete. The property is accessible for inspection, and I'd prefer the area to be properly measured and assessed before the final price is agreed. Quote Please provide a complete supply-and-install price, including GST, labour, footings, subframe, fixings and all normal installation materials. I'm also happy to purchase and supply the decking boards myself if this provides a better overall price, so please let me know if you would prefer to quote labour/subframe only or provide a complete supply-and-install option. When responding, please provide: 1. Composite decking product/brand and colour 2. Proposed subframe/construction method 3. Total installed price 4. Estimated timeframe 5. Examples/photos of similar composite decking you've completed Site inspection is welcome before finalising the quote. This is currently a request for pricing and comparison only. I am not committing to a contractor by responding to this task or arranging a site inspection.

Looking for some on to do composite decking platforms.. we need this to do some ground works and keep it back. Approx sizes - 3500W X 700D, 3500W X 2000 or 3500W X 1000(2pcs) Onsite or offsite(Delivered).

We have 1343mm 4 numbers, 1880mm 2 numbers needed replacing, the deck is composite deck with corrugated underneath and grove at both side with oak timber texture finishing . You can supply, we will reimburse the cost, and will pay the amount of your work.

Looking for an experienced carpenter/deck builder to remove and replace two existing timber deck pathways and repair a small deck area at the front of a cubby house at my rental property. Scope of works: * Remove and dispose of existing timber decking boards. * Supply and install new low-maintenance composite (eco/composite) decking that won’t require painting or staining and is resistant to rot. * Replace any damaged framing if required (please advise if additional work is needed after inspection). * Remove all rubbish from site. Deck sizes: * Path 1: 2,640mm (L) x 1,200mm (W) * Path 2: 4,780mm (L) x 1,200mm (W) * Small deck area in front of cubby house (see photos) – the timber has rotted and needs replacing. Total decking area is approximately 8.9m², plus the small cubby section. Please quote: * Supply and installation of composite decking. * What brand/product you recommend. * Timeframe for completion. * Any warranty on workmanship.

Wanting this verandah decked in composite or looking for other ideas.

Looking for an experienced deck builder/carpenter to build a grey composite decking surround around my spa, similar to the attached reference photo. Spa Details * 2.15m x 2.15m spa * 900mm high * Installed on a level tiled alfresco Requirements * Dark grey composite decking * Raised surround with front step * Not fixed to the tiled floor * Removable design for future servicing * Hinged, split, or removable sections to maintain access to spa side panels * Strong enough for people to walk and sit on * Does not need to support the spa itself Please Include * Supply and install price * Estimated build time * Whether materials are included * Recommended access solution Looking for a modern finish similar to the reference image while keeping full access to the spa for maintenance.

We are reaching out for quotes on our 1 yr built home in Lakelands. We currently have sand and lots of it and a small paved alfresco under roof. We are wanting to composite deck the squared area to the retainer blocks both east facing and south facing then to the sliding back door with all edges aligned to the house structure. I have attached the plans of the area. Please reach out shall you need anything else.or.prefer to do a site inspection

Fix composite decking - cut out broken part and put new one- 2-3 spots, seal roof gutter- 1 spot

I have a broken composite decking panel that either need replacing or additional support underneath.

Wanting to get a quote done for a small deck approx 1800mm x 1200mm x 250mm will to hide a sewer access hatch in back yard, wanting it made out of composite same or similar colour to match the fencing, cheers

Project Item : Outdoor WPC Decking for Swimming Pool - Supply & Fit Total Area : 43 Square Meters (m²) Pool Type : Fibreglass Pool （The deck needs to cover pool edge.） Site Condition : Sandy ground ( Requires Concrete Footings & durable frame (aluminum or H4 treated wood). Estimated timeframe for the project. The following photos show the swimming pool as it is now and what it will look like after completion.

Looking for someone who is experienced in building a composite deck, to guide and assist me for a day for my composite deck build. I have bought all the required materials, and have a good general knowledge of how to do it, just would like someone to help guide me with the details and to assist with the install whilst at the property. Trex composite decking, rectangular decking 7.5x2.6m. One side attached to a garage, one side abuts pool pavers. Decking to go in the sandy area.

Supply and install composite decking in the backyard, approx 13sqm. Only the grass area

Composite decking 2.5mx3.5m

Its a rectangle space level flat. Pool is rectangle 6x3. Space is 5 x10= 50- 18 = 32 approx Pic below for inspiration only

Install timber frame and composite deck around pool - urgent

We have a space approx 1/1.5m by 3/3.5m that we want to install composite decking on. We are open to trades who can supply and install, or install only depending on cost and availability. Must be able to come and confirm recommended size of area for install, demonstrate experience and be available to complete the work within the next 2 or so weeks. Items to be completed based on an alternate quote: Composite deck install: + remove pavers approximately 1.6 m of the fence back towards the pillar and 3.5 m from the missing section all the way to the retaining wall + remove approximately 100mm of soil so we can install 90 mil timber framing + remove 100mm of soil from the middle span 3.5 m so we can install two laminated 90 x 45 H3 timber to act as a bearer + concrete two stirrups under bearer for extra support + install 90 X 45 H3 timber joists using Joyce hangers + apply joist tape to all joists + once framing is complete install Eko composite deck + decking will go hard up to the pillar around downpipe grate and continue on the other side of the pillar * dispose of all rubbish and debris offsite

I’m looking for someone to supply and install composite decking in my alfresco area (about 35 sqm) over the existing concrete slab. Access is easy, and the area is already level. Please give me a quote for materials + labour using standard composite boards. Looking for reasonable pricing and someone with past decking experience.

Front and back jarrah decking verandah need to be washed and resealed - 2 coats of water based timber sealant. Back Deck approx 8x4m long. Front deck 8x2 dropping down to 3 x1 (updated with pics)

Looking for someone experienced with timber decking to refresh our outdoor deck (approximately 8.5 m × 2.7 m). We are unsure of which timber it is. The timber is structurally sound but looks faded and dull. There are also a few small paint splatters from the previous owners. We’re offering $250 for labour, and we will supply the decking oil and cleaning products if you specify what is needed. The job would involve cleaning, preparing the surface as needed, removing the small paint splatters where possible, and applying decking oil to restore the rich reddish-brown colour. Please include any equipment costs in your offer. Thanks!

Clean and recoat small timber deck – approximately 6 m² Looking for someone experienced to refresh my timber decking, approximately 6 metres long × 1 metre wide. The job includes cleaning, preparing and sanding as needed, then applying a suitable exterior decking finish to achieve a neat, even result. Please include labour, materials and equipment in your offer, and advise which finish you recommend to suit the existing coating. Dates flexible. Please let me know your availability.

I need a raised timber deck quoted and built about 11m x 5m including full length step.

We are looking for someone to sand and oil our outdoor timber decking, approximately 9x4m with a raised bench and a step (see photos).

Looking for someone experienced in timber deck maintenance to clean, prepare and re-oil our outdoor timber decking in South Perth. The decking surrounds a swimming pool and extends around a spa and outdoor entertaining area. The pool is approximately 9 metres long. I estimate there is around 50 m² of actual timber decking, but this is only an estimate. The attached photos show the areas involved. Job includes: Thoroughly clean and prepare all timber decking Appropriate pressure cleaning where suitable, without damaging the timber Light sanding/preparation of any areas that require it Allow the timber to dry appropriately after cleaning Apply two coats of good-quality decking oil Take appropriate care around the swimming pool, spa, glass, walls and pool coping Leave the area clean and tidy on completion Please advise whether your offer includes supply of the decking oil or is for labour only. I am happy to supply the oil if preferred. Looking for someone who has experience cleaning and re-oiling timber decks. Please include details/photos of similar work if available. Happy for the successful person to inspect and confirm the area and scope before commencing. Location: South Perth Timing: Flexible Budget: $700

Looking for an experienced carpenter/deck builder to remove and replace two existing timber deck pathways and repair a small deck area at the front of a cubby house at my rental property. Scope of works: * Remove and dispose of existing timber decking boards. * Supply and install new low-maintenance composite (eco/composite) decking that won’t require painting or staining and is resistant to rot. * Replace any damaged framing if required (please advise if additional work is needed after inspection). * Remove all rubbish from site. Deck sizes: * Path 1: 2,640mm (L) x 1,200mm (W) * Path 2: 4,780mm (L) x 1,200mm (W) * Small deck area in front of cubby house (see photos) – the timber has rotted and needs replacing. Total decking area is approximately 8.9m², plus the small cubby section. Please quote: * Supply and installation of composite decking. * What brand/product you recommend. * Timeframe for completion. * Any warranty on workmanship.

I have a small outdoor space in front. Plan to do some devking to uplift it. Please quote for a low-level floating courtyard deck over the existing paved/concrete area, not attached structurally to the house, with no roof, no balustrade, no privacy screen, and a raised garden border kept under 500mm. Please ensure drainage access is maintained

After someone to sand back timber decking to bare wood and oil with natural oil. 50sqm of Decking (Merbau) Also need 5 2m lengths replaced as showing in last photo.

Repair/adjust loose merbau decking boards, front and back of house. * There are half a dozen boards that need reaffixing (nails not screws), some of these need to be realigned too (maybe using some sort of spacer to hold them in position). * There is one section of 3-4 boards that has a slight spring to it, I suspect the joist needs fixing. * While you're here, I'll also ask you to punch back in any other nails which have risen over the years (maybe 20- 30 nails in total). Happy to consider an hourly rate or a fixed amount.

Looking for a qualified and experienced carpenter/deck builder to ideally repair and rejuvenate our front covered wooden deck at our home in Innaloo. The deck is approximately 6.7m x 3.2m and is worn/weathered in some areas. We’re open to recommendations and pricing options, to replace only the worst affected boards/panels and restore/re-varnish. We would also like the existing L-shaped wooden seating removed, with ideally one section rebuilt/reinstalled along the house wall. The current seating frame may be reusable and the storage space underneath is currently used for a mower and gardening tools, so would like to retain some storage functionality if possible. Open to quotes and advice from experienced carpenters. Please only apply if you have relevant experience and examples/photos of previous work. Thanks

Minor Restoration on timber decking. Sand, replacement nails & stain size 40sqm.

Remove small timber deck and general clean up of front courtyard help with retic repairs

Approx 45 sqm of timber decking We are needing someone to clean and oil. Please only apply if qualified and know what you’re doing Photos of some of the decking attached

As before when you completed the work

Would like to replace existing timber decking with composite decking in a teak colour. Supply and install.

Install approx 6sqm of timber decking as per photos. Also remove and replace extra decking as required. Apply 2 coats of decking oil on completion to whole area approx 36 sqm

Install approx 6sqm of timber decking as per photos. Also remove and replace extra decking as required. Apply 2 coats of decking oil on completion.

I need 5-6 broken or cracked jarrah timber pieces removed and replaced

Job includes all standard preparation steps: - Sweep and remove debris between boards - Tighten a couple of screws and maybe other minor repairs if deemed necessary (after consultation with me) - Wash/scrub using deck cleaner, rinse, let dry completely (planks are a bit old so no high-pressure washer) - Sand first with low grit to strip old coating then medium grit for smoothing (planks are a bit uneven so no floor sanding machine) - Sweep/brush to remove any sanding dust - Wash using timber brightener, rinse, let dry Job does not include oiling (will do myself). I can provide materials and tools apart from sander. Timing will be weather dependent before mid-February.

Old decking and joists underneath decking needs to be removed. I can dispose of it all so just need it chopped to approximately 40cm lengths. Beams (joists) also need to be chopped to the same length. Does not need unscrewing so should be pretty straightforward. - Due date: Needs to be done as soon as possible.