Find experienced local carpenters in Sydney Eastern Suburbs

I would like someone to come and look at our wooden deck area (approx 4m x 5.5m). We have had it sanded and painted in the past and there seems to be some weak planks that might need replacing or reinforcing before we have a party at home in October.

I need some decals attaching to stainless steel

Chest of drawers and hanging cupboard need to be relocated from first floor of a terrace in Paddington to Cremorne. May need some minor disassembling. May be easier to lift over the front balcony to avoid having to deconstruct the whole unit.

3 waterfall tables 850mm length by 300ml depth by 650mm high 4 waterfall tables 1190mm length by 300mm depth by 1000m tall 4 waterfall benches 1190 length by 300mm depth by 600mm height. They are being made from norfolk pine, The materials will be delivered to your workplace. Planks are cut waiting to be delivered for an immediate start. Delivery to site. 8 of the items will be used outdoors and will rest on an uneven footpath. As a result these items will need to be cut to length on site for accuracy.

I need the following tasks done: Installing 6 timber shelves above kitchen. Shelves are on site: 4 of them need cutting down slightly to fit the space.  The walls behind are brick not gyprock. 2. Cutting decorative panel (it is some kind of foam) to size to go behind bed and installing timber shelf above it. 3. Cutting hole in gyprock to create small shelf next to bed. 4. Installing new digital door locks on front door.

Looking for a quote for a 3.5 cabinet like in the image attached. Overall size 3.5m. Please include what material you’re using.

Strip back to bare & re stain in oil based varnish console measuring 240cm x 40cm.

Looking for assistants from someone who has installed joinery carcuss and kitchen units before. Must have past experience . I have a few days through the next month and potential on going work.

We are having a new security door installed but need carpenter to remove some existing old doors frame beading where current door frame is.

I need just one core hole drilled into a piece of joinery at my home so that my wife can run her power cables through to the powerpoint. Landlord would prefer a professional who will do this clean - as the place is a rental

Experienced Carpenter Wanted – Day Labour Basis We are looking for a skilled and reliable carpenter with expertise in framing, doors, flooring, stairs, skirting, decking, and other carpentry work. The ideal candidate must have: - A valid ABN - Insurance coverage If you have a strong work ethic, excellent craftsmanship, and attention to detail, this opportunity could lead to ongoing work for the right person.

I’m looking for someone who can repair a vintage-style Parker chair replica that has come apart. I’ve attached two photos – one shows what the chair should look like when fully assembled, and the other shows its current state. The frame has come loose but nothing is broken or missing – I have all the original parts including the cushion (not pictured). It just needs to be put back together securely. Ideally looking for someone experienced in furniture repair or woodworking who can reassemble it properly and ensure it’s sturdy and safe to use again. Location: Randwick Timing: Flexible, but sooner is better Parking available: Yes Suggested price: $80–$100 – open to offers based on experience and availability.

Help to lift beam above The beam is 3 metres, weighs roughly 50kgs No other work is required just 1 hour to help me, I need someone who is fit and capable of lifting something of this weight. No trade experience is required or any kind of qualifications just someone to help lift this and that’s all Scope: -Together lift timber -Manoeuvre it to sit horizontally (like the photo) -Together both walk up a ladder -Lift the beam to sit on top of bricks on either side -Line it up to sit in the correct position (not far to go once it’s up) Job completed! I will not need any further help from yourself 1 hour max and everything is ready to go whatever time you can arrive, preferably before 12pm

Assemble flat packed heavy duty shelving units

We need the cabinet above our fridge cut so it can be raised up to fit our new fridge underneath. See photos. The fridge space right now is 850w x 1710h x 870d (and 622d on the left side). The fridge is taller than we have room for - its dimensions are 835x1787x730mm. The fridge's depth and width are OK, it's just the height that's a problem. So this task is for you to help us out. We need the cabinet taken off the wall to have some height cut from it, then mounted again 80mm higher up. To try and be ultra clear - new fridge is 1787mm high but the current fridge space is only 1710mm high. So there is an 80mm difference. We need that extra height to fit the fridge, which requires cutting the cabinets shorter. There’s 45mm of space to move it up, so the cabinets would be cut shorter by 35mm and moved up 45mm.

Tools required to secure 2 already built billy bookcases to brick wall & ALSO cut larger skirting board notches so bookcases back snug to wall Have the basic screws & brackets provided w Ikea flatpack (see photos) Will require tools/approp hardware to secure into brick wall & trim baseboard notch provided by handyman Thanks!

I have a leak on the wall and we suspect it could be because the screws used to hung the cabinet are too deep and the cavity wall has been perforated. (It’s a double brick building) The leak has been there for years but it only happens when we get massive rain. I require someone experienced with cabinet removal and install . The roof is not on the top floor and in the room above there is no leak so that’s why we believe is from the side which is an external wall. Do you have experience with leaks like this one?

I need a box built in shop to be level with other box I have plans

Hello, my revolving 360 Lazy Susan corner kitchen cabinet is no longer turning correctly. The metal in the mechanism at the bottom looks a bit bent from use over time and the plastic in the mechanism sometimes pops out. This results in it not spinning around smoothly and dragging against the inside of the cabinet or sometimes not revolving at all. The two cabinet doors are attached to the revolving cabinet. I think the mechanism will need to be replaced (if you recognise the model) or perhaps the whole rotating cabinet may need to be replaced.

We are doing some joist hanging and framing, and would love another set of hands ! Experience required. Thank you